1EDP

CORCOM Product Guide High Performance Compact RFI Power Line Filters with IEC Connectors ED Series ED1/ED1C ED2 UL Recognized CSA Certified VDE Approved *15ED1, 15ED8 UL, CSA 15 Amps/250 VAC 10 Amps/250 VAC VDE ED8/ED8C ED4/ED4C ED Series The ED series filters are more effective than generalpurpose filters in applications where line-to-line and lowfrequency line-to-ground noise must be controlled; for example, to bring equipment into compliance with FCC conducted emissions standards. The ED series offers significantly higher performance than comparably sized filters, especially at high frequencies, yet is in the EF series package which incorporates the IEC power line connector. Models ED1, ED1C, and ED2 have .250” terminals on load side; ED4, ED4C, ED8, and ED8C have wire leads. Models 6ED1C, 10ED1C, 6ED4C, and 6ED8C additionally incorporate a separate ground-circuit inductor to isolate the equipment chassis from power line ground at RF frequencies. Specifications Maximum leakage current,each line-to-ground @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: Hipot rating (one minute): line-to-ground line-to-line Operating frequency: Rated voltage (max.): Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating .15 .22 mA .38 mA 1500 VAC 1450 VDC 50/60 Hz 250 VAC Frequency-MHz .5 1 5 10 35 29 23 14 9 20 14 20 42 36 30 20 12 25 20 25 49 45 41 35 28 37 35 37 52 50 45 39 34 42 39 42 30 54 54 50 45 40 50 45 50 Electrical Schematics ED Models LINE LOAD ED1, ED2, ED4, ED8 01A 24 03A 20 06A 14 10A 8 15A 4 ED1C 06A 14 8 10A ED4C, ED8C 14 06A ED-C Models LINE LOAD Line-to-line in 50 ohm circuit Current Rating .15 Frequency-MHz .5 1 5 10 15 15 15 15 18 17 15 17 20 20 20 20 23 23 20 23 37 37 31 23 33 36 23 29 37 37 35 44 44 42 44 38 30 36 36 34 47 47 42 47 42 Resistor location for reference only. Line Cord Line Cord No. GA400: 71/2 foot, 3-conductor line cord to mate with ED series. 32 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. ED1, ED2, ED4, ED8 3 01A 03A 3 06A 3 10A 6 6 15A ED1C 06A 7 10A 6 ED4C, ED8C 7 06A Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide High Performance Compact RFI Power Line Filters with IEC Connectors (Continued) ED Series RFI Power Line Filters Case Styles ED1 & ED1C Case Dimensions A Part No. (max) 1ED1, 3ED1 1ED2, 3ED2 1ED4, 3ED4 1ED8, 3ED8 6ED1 A B B (max) 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 1.19 30.2 C (max) 0.81 20.6 0.85 21.6 0.85 21.6 0.81 20.6 0.81 20.6 0.81 20.6 0.85 21.6 0.85 21.6 0.85 21.6 0.81 20.6 0.81 20.6 0.81 20.6 0.81 20.6 0.81 20.6 D ± .015 ± .38 E (max) 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 1.98 50.3 F (ref) — — .295 7.5 .295 7.5 — — — .295 7.5 .295 7.5 .295 7.5 .295 7.5 — — — ED2 C .65 Max. 16.5 D E Typical dimensions: Terminals: .250 [6.35] (3) Holes: .07 [1.8] Dia.(2) Slot: .07 x .16 [1.8 x 4.1] 6ED1C 6ED2 ED4 &ED4C C Green/Yellow Brown Blue 6ED4 6ED4C 6ED8 6ED8C D E A F B F 10ED1, 15ED1* 10ED1C ED8 & ED8C Green/Yellow Brown F 15ED8* B F DE Blue 2.21 56.0 1.55 39.4 1.55 39.4 1.55 39.4 2.21 56.0 2.62 66.5 1.55 39.4 1.55 39.4 1.98 50.3 1.55 39.4 1.98 50.3 2.62 66.5 2.62 66.5 1.98 50.3 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 1.575 40.01 Part Numbers 1ED1 1ED2 1ED4 1ED8 3ED1 3ED2 3ED4 3ED8 6ED1 6ED1C Line Cord No. .140 Dia. (2) Insulating Boot No. 3.56 .234 R 5.94 A C Typical dimensions: Wire leads:4.0 [101.6] Min., 18 AWG Mounting holes: .132 [3.35] Dia. (2) Recommended Panel Cutouts .820 20.8 .140 Dia. (2) 3.56 .900 22.9 06ED2 06ED4 06ED4C 06ED8 06ED8C 10ED1 10ED1C 15ED1* 15ED8* GA400 FA601 15 Amps/250 VAC 10 Amps/250 VAC 1.200 30.48 1.575 40.01 1.200 30.48 1.575 40.01 Panel Cutout (front mount) Tolerance ±.005 [0.13] .062 R 1.58 Panel Cutout (back mount) Tolerance ±.005 [0.13] *15ED1, 15ED8 UL, CSA VDE Note 1: Note 2: ED1, ED1C, ED8 and ED8C allow front or back mounting. ED2, ED4 and ED4C allow back mounting only. 33 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com