2106056-5

Introducing SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These connectors provide low power, sealed solutions for free hanging, wire-to-wire interconnects and for robust, stable electrical and mechanical wire-to-board connections used in solid state lighting. KEY FEATURES • Available in 2, 3 & 4 positions • SMT and thru hole • Wire-to-wire and wire-to-board • • • • • • (vertical and right angle) 18 – 24 AWG stranded wire Positive integral latching Polarized connectors Pre-assembled seals & wire guides IP67 rating UV resistance (wire-to-wire) APPLICATIONS • • • • • • • • Billboards Live events lighting Wall wash lighting Spot lighting Street lighting Tunnel lighting Flood lights LED strip lighting SlimSeal SSL Connector LIGHTING APPLICATIONS electricAl Operating Current : 5 AMPS (18-20 AWG) & 3.5 AMPS (22-24 AWG) Maximum Operating Voltage : 250 VAC/250 VDC Dielectric Withstanding Voltage : 1500 VAC mecHAnicAl channel/sign emergency Number of positions : 2, 3 and 4 Operating Temperature : -40°C to 105°C Seal Rating : IP67 Durability : 30 mating cycles mAteriAls digital signage Architectural Housings : UL 94 V0 rated high temperature resistant thermoplastic Receptacle Contacts : Tin Plated Copper Alloy Tab Contacts : Tin Plated Brass Integral Seals : Silicone Rubber street & stadium Indoor stAndArds And specificAtions UL 1977, CSA C22.2 No. 182.3 TE Application Specification : 114-13261 TE Product Specification : 108-2391 Exposure : UL 746C F1 (suitable for outdoor use, wire-to-wire only) Office commercial refrigeration ApplicAtion toolinG 18-20 AWG Tab and Receptacle Terminals PART NUMBER 2063957-1 1530177-2 1530177-1 DESCRIPTION Hand Tool HDI Applicator-Bench Terminator HDI Applicator-Leadmaker 22-24 AWG Tab and Receptacle Terminals PART NUMBER 2063956-1 1530178-2 1530178-1 DESCRIPTION Hand Tool HDI Applicator-Bench Terminator HDI Applicator-Leadmaker Tyco Electronics | SlimSeal SSL Connector product dimensions Vertical SMT Header Recommended PCB Layout PART NUMBER 2106053-2 2106053-4 2106053-6 POSITION SIZE 2 3 4 DESCRIPTION SMT Vertical Header SMT Vertical Header SMT Vertical Header DIM “A” 8.96 [.353] 12.46 [.491] 12.46 [.491] DIM “B” 8.96 [.353] 8.96 [.353] 12.46 [.491] DIM “C” 14.40 [.567] 17.90 [.705] 21.40 [.843] DIM “D” 20.65 [.813] 24.15 [.951] 27.65 [1.089] Right Angle SMT Header Recommended PCB Layout PART NUMBER 2106056-2 2106056-5 2106056-8 POSITION SIZE 2 3 4 DESCRIPTION SMT Right Angle Header SMT Right Angle Header SMT Right Angle Header DIM “A” 8.96 [.353] 12.46 [.491] 12.46 [.491] DIM “B” 8.96 [.353] 8.96 [.353] 12.46 [.491] DIM “C” 20.61 [.811] 24.11 [.949] 27.61 [1.087] DIM “D” 14.40 [.567] 17.90 [.705] 21.40 [.843] Tyco Electronics I Low Power Sealed Lighting Connector SlimSeal SSL Connector product dimensions cont. Vertical Thru Hole Header Recommended PCB Layout PART NUMBER 2106112-2 2106112-4 2106112-6 POSITION SIZE 2 3 4 DESCRIPTION TH Vertical Header TH Vertical Header TH Vertical Header DIM “A” 7.42 [.292] 10.92 [.430] 10.92 [.430] DIM “B” 7.42 [.292] 7.42 [.292] 10.92 [.430] DIM “C” 17.54 [.691] 21.04 [.828] 24.54 [.966] Right Angle Thru Hole Header Recommended PCB Layout PART NUMBER 2106111-2 2106111-4 2106111-6 POSITION SIZE 2 3 4 DESCRIPTION TH Right Angle Header TH Right Angle Header TH Right Angle Header DIM “A” 7.42 [.292] 10.92 [.430] 10.92 [.430] DIM “B” 7.42 [.292] 7.42 [.292] 10.92 [.430] DIM “C” 17.54 [.691] 21.04 [.828] 24.54 [.966] SlimSeal SSL Connector I Tyco Electronics SlimSeal SSL Connector product dimensions cont. Free Hanging Plug Assembly Exploded View PART NUMBER 2106135-2 2106135-3 2106135-4 POSITION SIZE 2 3 4 DESCRIPTION Plug Assembly Plug Assembly Plug Assembly DIM “A” 14.40 [.567] 17.90 [.705] 21.40 [.843] Free Hanging Receptacle Assembly Exploded View PART NUMBER 2106136-2 2106136-3 2106136-4 POSITION SIZE 2 3 4 DESCRIPTION Receptacle Assembly Receptacle Assembly Receptacle Assembly DIM “A” 14.40 [.567] 17.90 [.705] 21.40 [.843] Free Hanging Receptacle Contact Tab Contact PART NUMBER 2106123-1 2106123-2 1-2106123-1 1-2106123-2 POSITION SIZE 18-20 AWG Receptacle Terminal 18-20 AWG Receptacle Terminal (Loose Piece) 22-24 AWG Receptacle Terminal 22-24 AWG Receptacle Terminal (Loose Piece) PART NUMBER 2106124-2 2106124-9 2-2106124-2 2-2106124-7 POSITION SIZE 18-20 AWG Tab Terminal 18-20 AWG Tab Terminal (Loose Piece) 22-24 AWG Tab Terminal 22-24 AWG Tab Terminal (Loose Piece) Cable Assemblies PART NUMBER 2106378-2 2106378-3 2106378-4 POSITION 2 3 4 DESCRIPTION 101.60 [4.000] Plug Cable Assembly 101.60 [4.000] Plug Cable Assembly 101.60 [4.000] Plug Cable Assembly PART NUMBER POSITION 2106391-2 2106391-3 2106391-4 2 3 4 DESCRIPTION 101.60 [4.000] Receptacle Cable Assembly 101.60 [4.000] Receptacle Cable Assembly 101.60 [4.000] Receptacle Cable Assembly SlimSeal SSL Connector I Tyco Electronics Questions to ask at design in What wire gauge and insulation type will you be using? The connectors accepts 18 -20 AWG and 22 – 24 AWG stranded wire with a wire varying maximum insulation outside diameters per wire gauge. What special retention mechanisms are available to ensure stability on the printed circuit board? The vertical and right angle SMT headers have surface mount hold downs whereas the vertical and right angle TH headers have board locks to provide stability during mating and un-mating. What prevents the connectors from being disconnected unintentionally? The connectors are snag resistant and have an integral, flush mounted, actuated latch that prevents inadvertent un-mating of the connectors. Is your manufacturing process automated? The SMT headers are manufactured in high temperature material for reflow processing and tape and reel packaged for high speed SMT processing. What application tooling options are available? Hand tools are available for product evaluation and/or low volume production using loose piece terminals. Applicators are available for mid to high volume production terminals on reel using bench top semi-automatic presses or fully automated lead makers. What mechanical and electrical testing has the connectors been subjected to? The TE Product Specification 108-2391 provides a summary of the test groups, sequences and results that the product was subjected to during product qualification testing. What version of the header assemblies, vertical or right angle, are more widely accepted? Right angle surface mount headers are more often chosen because they provide a more robust, low profile connection to the printed circuit board. Vertical headers are chosen if limited space is available to mate the plug connection in the final assembly FOR MORE INFORMATION : www.tycoelectronics.com/lighting Technical Support Internet: USA: Canada: Mexico & Central America: South America: Germany: UK: France: Netherlands: China: www.tycoelectronics.com/help +1 (800) 522-6752 +1 (905) 470-4425 + 52(0) 55-1106-0814 +55 (0) 11-2103-6000 +49 (0) 6251-133-1999 +44 (0) 800-267666 +33 (0) 1-3420-8686 +31 (0) 73-6246-999 +86 (0) 400-820-6015 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.tycoelectronics.com/leadfree Tyco Electronics Corporation Harrisburg, PA tycoelectronics.com © 2010 Tyco Electronics Corporation All Rights Reserved. 4-1773455-9 3M FP 04/2010 TE (logo) and Tyco Electronics are trademarks of the Tyco Electronics group of companies and its licensors. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult Tyco Electronics for the latest dimensions and design specifications.