9100-301T999

Catalog 1308242 Issued 3-03 (PDF Rev. 3-04) PRODUCTS UNLIMITED 9100 series Power Relay 1- and 2-pole, 3-12 FLA AC or DC Coil File E75492 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features • Single- or double-pole relay used extensively in HVAC applications. • Multi-positional mounting without affecting operation. • Convenient 0.250” (6.35 mm) quick connect terminals. Coil Temperature Rise Above Ambient 100 Coil Temperature Rise (C) 90 80 70 60 50 40 30 20 10 0 80 100 120 % Of Nominal Coil Voltage 130 Contact Data @ 25°C Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC), 1 Form C (SPDT), 2 Form A (DPST-NO), 2 Form B (DPST-NC), 2 Form C (DPDT) or 1 Form A + 1 Form B (SPST-NO+SPST-NC). Materials: Silver, Fine Silver and Gold Alloy. Maximum Ratings: Silver (Power) Contacts All Forms: 3/4 HP @ 125/250VAC; 12 FLA, 60 LRA, 15A resistive @ 125VAC; 6 FLA, 35 LRA, 15A resistive @ 250/277VAC; 3 FLA, 18 LRA, 12.5A resistive @ 480VAC; 3 FLA, 14 LRA @ 600VAC; Form A only: 25A @ 277VAC, resistive. Fine Silver and Gold Alloy (Pilot) Contacts All Forms: 1/10 HP @ 125/250VAC; 3A @ 277VAC; 125VA @ 125VAC. Expected Life: 1 million ops., mechanical. 250,000 ops., at rated resistive loads. 100,000 ops., at rated inductive loads. Operate Data @ 25°C Must Operate Voltage: Approximately 85% of AC nominal coil voltage. Approximately 75% of DC nominal coil voltage. Environmental Data Temperature Range: Storage and Operating: -40°C – +65°C. Initial Dielectric Strength Initial Breakdown Voltage: 2,200 VAC @ 60 Hz. between live parts and exposed non-current carrying metal parts. Coil Data @ 25°C Voltage: 12 & 24 VDC; 24-277 VAC, 50/60 Hz. Max. Sealed Power: 9.5 VA (AC coils.); 5.75 W (DC coils). Nominal Inrush Power: 21.5 VA (AC coils.); 5.75 W (DC coils). Insulation Class: UL Class B (130°C). Duty Cycle: Continuous. Mechanical Data Termination: 0.250” (6.35 mm) quick connects. Dual terminals on the coil are standard. Weight: 6.08 oz. (173 g) approximately Dimensions are shown for 816 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 (PDF Rev. 3-04) PRODUCTS UNLIMITED Ordering Information Typical Part No. 1. Series: 9100 = 1- or 2-pole, 3-12 FLA relay 2. Pole Configuration: 2 = Two-pole 3 = Single-pole (1,2,3 omitted) 4 = Single-pole (4,5,6 omitted) 3. Contact Configuration – Poles 4, 5, 6: 1 = 1 Form A (SPST-NO), Silver Contacts. 2 = 1 Form B (SPST-NC), Silver Contacts. 3 = 1 Form C (SPDT), Silver Contacts 4 = 1 Form A (SPST-NO), Fine Silver Contacts. 5 = 1 Form B (SPST-NC), Fine Silver Contacts. 6 = 1 Form C (SPDT), Fine Silver Contacts 4. Contact Configuration – Poles 1, 2, 3: 1 = 1 Form A (SPST-NO), Silver Contacts. 2 = 1 Form B (SPST-NC), Silver Contacts. 3 = 1 Form C (SPDT), Silver Contacts 4 = 1 Form A (SPST-NO), Fine Silver Contacts. 5 = 1 Form B (SPST-NC), Fine Silver Contacts. 6 = 1 Form C (SPDT), Fine Silver Contacts 5. Coil Voltage (50/60 Hz.): B = 12VDC Q = 24VAC C = 24VDC P = 100VAC 6. Customer ID Suffix: 999 = Standard Model 7 = 1 Form A (SPST-NO), Gold Alloy Contacts. 8 = 1 Form B (SPST-NC), Gold Alloy Contacts. 9 = 1 Form C (SPDT), Gold Alloy Contacts 0 = 4, 5, 6 Omitted B 9100 -2 3 3 Q 999 7 = 1 Form A (SPST-NO), Gold Alloy Contacts. 8 = 1 Form B (SPST-NC), Gold Alloy Contacts. 9 = 1 Form C (SPDT), Gold Alloy Contacts T = 120VAC S = 200VAC U = 208/240VAC N = 240VAC V = 277VAC QS = 24VAC, low VA 000-998 = Factory assigned customer ID Standard part numbers listed below are more likely to be available from stock. 9100-233Q999 9100-233T999 9100-233U999 Outline Dimensions 2.01 (51.05) .095 (2.41) 1.81 (45.97) .15 (3.81) .22 (5.59) .495 (12.57) 1.830 (46.48) .550 (13.97) .145 (3.68) .203 DIA (5.16) .195 (4.95) .710 (19.03) 2.365 (60.1) 2.110 (53.6) .16 (4.06) 1.64 (41.66) Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 817