A-701P-3

HARTMAN Aerospace Power Products DC Current Sensor Features: • SPST N.O. Main Contacts • Remote Reset • 28 VDC • 500 Amps • High Reliability • Meets many requirements of MIL-R-6106 A-701P-3 SPST N.O., 500 Amps, 28 VDC CONTACTOR CONFIGURATION Dimensions for this product are expressed in inches. Multiply values by 25.4 for millimeters. Notes: PRODUCT SPECIFICATIONS Construction Main Contacts: Configuration Voltage (Nominal) Current (Resistive) Auxiliary Contacts: Configuration Voltage (Nominal) Current Resistive Inductive Coil Data: Duty Cycle Voltage (Nominal) Pick-Up Voltage Drop-Out Voltage Coil Current @ 28 VDC & +25°C In-Rush Hold Operating Temperature Life: Electrical Mechanical Weight Gasket Sealed, Vented SPST N.O. 28 VDC 500 Amps for 90 Seconds; 1500 Amps In-Rush SPDT 28 VDC 5 Amps 3 Amps Intermittent 28 VDC 12 VDC Maximum 0.5 - 5 VDC 2 Amps 2 Amps -55°C to +71°C 25,000 Cycles 100,000 Cycles 3 Lbs. 8 Oz. For factory-direct application assistance, contact the HARTMAN product team at (419) 521-9500, Fax (419) 526-2749. © 2004 by Tyco Electronics Corporation. All Rights Reserved. HARTMAN and TYCO are trademarks. Additional Information: Current Trip Point – 400 Amps ± 10% Reset is achieved by momentarily removing SW voltage. Consult Hartman for Detailed Theory of Operation. Catalog (web doc only) Revised 5-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967