AHS080-2018

PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com PRODUCT: AHS080-2018 DOCUMENT: SCD 24509 REV LETTER: F REV DATE: APRIL 10, 2008 PAGE NO.: 1 OF 1 Overcurrent Protection Device Raychem Circuit Protection Products Specification Status: Released Maximum Electrical Ratings Operating Voltage / Interrupt Current 16Vdc / 70A C Marking: F H08 Manufacturer’s Mark Part Identification B D E Notes: 1. All metal surfaces are tin plated. 2. Devices cannot be wave soldered. 3. Drawing not to scale. A TABLE I. DIMENSIONS: A MIN MAX mm: 4.72 5.44 in*: (0.186) (0.214) B MIN --C D E F MAX MIN MAX MIN MAX MIN MAX MIN MAX 1.52 4.22 4.93 0.25 0.36 0.25 0.36 0.30 0.46 (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.012) (0.018) TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS** TIME TO TRIP** SECONDS AT 20°C, 8.0A MAX 9.0 RESISTANCE VALUES OHMS AT 20°C MIN MAX* 0.130 0.550 TRIPPED-STATE POWER DISSIPATION** WATTS AT 20°C TYP. 1.5 AMPS AT 20°C HOLD 0.80 TRIP 2.00 * Maximum resistance is measured 1 hour after reflow ** Values specified were determined using PCB’s with 0.120”X2.0 ounce copper traces. Reference Documents: Precedence: Effectivity: CAUTION: PS400, PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant ELV Compliant Pb-Free © 2002, 2008 Tyco Electronics Corporation. All rights reserved.