PolySwitch™ Resettable Device Short Form Catalog
MAY 2005
www.circuitprotection.com
For over 20 years, Raychem Circuit Protection, a unit of Tyco Electronics, has pioneered the technology behind PolySwitch™ PPTC (Polymeric Positive Temperature Coefficient) devices. The use of PPTC devices as a variable resistor in circuit protection applications was first pioneered by Raychem several decades ago. They were first used to help protect nickel-cadmium battery packs against excessive discharge and are still being used in that application today. Raychem Circuit Protection PolySwitch devices are commonly called resettable devices to distinguish them from traditional one-shot fuses that work only once and then must be replaced—an expensive and inconvenient proposition. While the generic term for these devices is “resettable fuses”, technically they are not fuses but actually non-linear thermistors. Designed for use in a wide range of electronic devices, these thermistor-type devices limit the flow of dangerously high current during fault conditions. But unlike traditional fuses that work one time and must be replaced, Raychem Circuit Protection’s PPTC devices reset after the fault is cleared and power to the circuit is removed. This reduces service and repair costs, resulting in improved customer satisfaction and reduced warranty costs. To date, billions of PolySwitch products are used to help protect a wide range of electronic products in automotive, battery and portable electronics, computer and peripherals, consumer, industrial, and telecommunication markets. In addition, Raychem Circuit Protection continues to expand their circuit protection offerings with Telecom Fuses, ROV Radial-leaded Metal Oxide Varistors, SiBar™ Thyristor surge protectors, Raychem Gas Discharge Tubes for overvoltage protection, and most recently, Polymer electrostatic discharge (PESD) protection devices. Raychem Circuit Protection is recognized as a leader for operational excellence and customer service. A dedicated direct engineering sales force, world-wide manufacturing and design centers, and local engineering support help them to think, manage and share globally, yet act locally, to meet customer needs. They are in compliance with globally recognized ISO9000 standards and certified to QS9000 standards. The division is headquartered in Menlo Park, CA with manufacturing facilities in California (USA), China, and Japan, with sales offices worldwide.
For the latest product information please visit us at: www.circuitprotection.com www.circuitprotection.com.hk (Chinese) www.raychem.co.jp/polyswitch (Japanese) Americas: Europe: Asia Pacific: Japan: (800) 227-7040 or (650) 361-6900 32-16-35 1321 852-2738-3401 81-44-900-5110
PolySwitch Resettable Device Benefits: • Reduced warranty and service costs • Increased reliability • Superior shock and vibration withstand • Wide variety of applications
Features: • Remotely resettable • Testable • Solid-state • Variety of form factors • Low resistance devices available
PolySwitch devices can be used in a wide variety of applications: Automotive • Actuators and medium motors • Trace protection • Powered outputs • Electronic control modules • Telematics Battery Protection • Lithium cells and battery packs • Rechargeable battery packs • Chargers Computers and Peripherals • DDC.2 computer video ports • Hard disk drives/storage devices • IEEE 1394 ports • Mouse and keyboard ports • USB (Universal Serial Bus) ports • PC (PCMCIA) cards and sockets • SCSI Industrial • MOSFET device protection • Motors, fans, and blowers • POS equipment • Process and industrial controls • Security and fire alarm systems • Test and measurement equipment • Transformers • Power supplies Consumer • Loudspeakers • Satellite video receivers Telecommunications & Networking • Central office equipment • Customer premise equipment • Primary protection: MDF modules, Network Interface Devices (NIDs) • xDSL modems and ISDN equipment • WAN, LAN, T1/E1 equipment • Cable power passing taps • UL 60950, Telcordia GR-1089, GR-974 compliant equipment • Equipment compliant with ITU-T K.20, K.21, K.45 resistibility recommendations • Distributed power supplies What’s New Inside: • Radial-leaded Products - RoHS compliant RHE • Surface-mount Products - RoHS compliant nanoSMD - RoHS compliant microSMD - RoHS compliant miniSMD - RoHS compliant decaSMD - RoHS compliant SMDH • Automotive Products - RoHS compliant AHR • Telecom Products - RoHS compliant TR600 - RoHS compliant TS600 - RoHS compliant TSM600
D E V I C E S F O R A U T O M O T I V E A P P L I C AT I O N S
The AGRF, AHRF, AHS and ASMD series devices are qualified to operate in automotive environments per the AEC-Q200 Stress Test Qualification for Passive Electronics in automotive applications. This specification requires devices to pass a rigorous test plan designed for automotive environments. Raychem Circuit Protection’s document is PS400.
Figure 1
A
Figure 2
Lead size AGRF400-1100, AHRF450-1000 Ø 0.81 (0.032) 20 AWG Lead size AGRF1200-1400, AHRF1300-1500 Ø 1.0 (0.04) 18 AWG
A B C C
B
Side view
End view
C
End view (AHS080 only)
AGRF: Radial-leaded
IH* (A) R1max. 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0 IH* (A) Ramax. 3.0 4.3 5.3 6.5 7.6 8.6 9.6 10.5 11.5 13.0
ELV Compliant, RoHS Compliant
Dimensions (millimeters/inches) A B C (max.) (max.) (typ.) 8.90 (0.35) 14.1 (0.56) 5.08 10.40 (0.41) 15.6 (0.61) 5.08 10.70 (0.42) 18.4 (0.73) 5.08 11.20 (0.44) 21.0 (0.83) 5.08 12.70 (0.50) 22.2 (0.88) 5.08 14.00 (0.55) 23.0 (0.91) 5.08 16.51 (0.65) 25.7 (1.01) 5.08 17.50 (0.69) 26.5 (1.04) 5.08 17.50 (0.69) 28.8 (1.14) 10.90 23.50 (0.93) 28.7 (1.13) 10.90
Part number AGRF400 AGRF500 AGRF600 AGRF700 AGRF800 AGRF900 AGRF1000 AGRF1100 AGRF1200 AGRF1400
IT (A) 7.6 9.4 10.7 13.2 15.0 16.5 18.5 20.3 22.1 27.3
V max. (Vdc) 16 16 16 16 16 16 16 16 16 16
I max. (A) 100 100 100 100 100 100 100 100 100 100
R min. (Ω) 0.0186 0.0140 0.0095 0.0066 0.0049 0.0041 0.0034 0.0033 0.0030 0.0022
R1max. (Ω) 0.0610 0.0340 0.0280 0.0200 0.0175 0.0135 0.0102 0.0089 0.0086 0.0064
Ramax. (Ω) 0.0850 0.0480 0.0320 0.0220 0.0181 0.0140 0.0106 0.0093 0.0091 0.0067
(0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.43) (0.43)
Fig. 1 1 1 1 1 1 1 1 1 1
* Hold current @ 25°C.
AHRF: High Temp Radial-leaded
IH* (A) R1max. 4.5 6.0 6.5 7.5 9.0 10.0 13.0 15.0 IH* (A) Ramax. 4.5 6.0 6.5 7.5 9.0 10.0 13.0 15.0
ELV Compliant, RoHS Compliant
Dimensions (millimeters/inches) A B C (max.) (max.) (typ.) 10.4 (0.41) 15.6 (0.61) 5.08 11.2 (0.44) 21.0 (0.83) 5.08 12.7 (0.50) 22.2 (0.88) 5.08 14.0 (0.55) 23.5 (0.93) 5.08 16.5 (0.65) 25.7 (1.01) 5.08 17.5 (0.69) 26.5 (1.04) 10.90 23.5 (0.93) 28.7 (1.13) 10.90 23.5 (0.93) 28.7 (1.13) 10.90
New
New
Part number AHRF450 AHRF600 AHRF650 AHRF750 AHRF900 AHRF1000 AHRF1300 AHRF1500
IT (A) 8.7 12.0 13.7 14.8 18.5 20.5 27.0 33.0
V max. (Vdc) 16 16 16 16 16 16 16 16
I max. (A) 100 100 100 100 100 100 100 100
R min. (Ω) 0.0170 0.0100 0.0090 0.0074 0.0061 0.0051 0.0034 0.0027
R1max. (Ω) 0.054 0.032 0.026 0.022 0.012 0.015 0.010 0.0063
Ramax. (Ω) 0.054 0.032 0.026 0.022 0.0170 0.015 0.010 0.0092
(0.20) (0.20) (0.20) (0.20) (0.20) (0.43) (0.43) (0.43)
Fig. 1 1 1 1 1 1 1 1
* Hold current @ 25°C.
AHS: High Temp Surface-mount
Part IH (A) number R1max. AHS080-2018 0.80 AHS160 1.60 IH (A) Ramax. 0.80 1.60
ELV Compliant, RoHS Compliant
Dimensions (millimeters/inches) A B C (max.) (max.) (typ.) 5.44 (0.214) 1.52 (0.060) 4.93 (0.194) 9.40 (0.370) 3.00 (0.118) 6.71 (0.264)
IT (A) 2.00 3.20
V max. (Vdc) 16 16
I max. (A) 70 70
R min. (Ω) 0.130 0.050
R1max. (Ω) 0.550 0.150
Ramax. (Ω) 0.550 0.150
Fig. 2 2
ASMD: Surface-mount
IH (A) R1max. 0.23 0.39 0.60 0.900 1.040 1.270 1.730 1.970 IH (A) Ramax. 0.23 0.39 0.60 0.90 1.04 1.27 1.73 1.97
ELV Compliant
Dimensions (millimeters/inches) A B C (max.) (max.) (max.) 7.98 (0.314) 3.18 (0.125) 5.44 (0.214) 7.98 (0.314) 3.18 (0.125) 5.44 (0.214) 7.98 (0.314) 3.18 (0.125) 5.44 (0.214) 7.98 (0.314) 3.00 (0.118) 5.44 (0.214) 7.98 (0.314) 3.00 (0.118) 5.44 (0.214) 9.40 (0.370) 3.00 (0.118) 6.71 (0.264) 9.40 (0.370) 3.00 (0.118) 6.71 (0.264) 9.40 (0.370) 3.00 (0.118) 6.71 (0.264)
Part number ASMD030 ASMD050 ASMD075 ASMD100 ASMD125 ASMD150 ASMD200 ASMD250
IT (A) 0.59 0.98 1.48 2.16 2.46 2.95 3.93 5.00
V max. (Vdc) 60 60 30 30 15 15 15 15
I max. (A) 10 10 40 40 40 40 40 40
R min. (Ω) 0.980 0.290 0.290 0.098 0.057 0.049 0.050 0.035
R1max. (Ω) 4.800 1.400 1.000 0.480 0.250 0.250 0.120 0.085
Ramax. (Ω) 4.800 1.400 1.000 0.480 0.250 0.250 0.120 0.085
Fig. 2 2 2 2 2 2 2 2
1
R A D I A L - L E A D E D D E V I C E S F O R E L E C T R O N I C S A P P L I C AT I O N S
240V ELV Compliant, RoHS Compliant
Figure 1 Figure 2
A
CALIPER
Figure 3
Lead size LVR005-016 Ø 0.51 (0.020) 24 AWG
A B
Figure 4
A
CALIPER
The LVR series is the first PolySwitch device family designed for use at line voltages of 120VAC to 240VAC. They may be used to help provide primary side protection of chargers, power supplies, and control transformers in many industrial, commercial and consumer applications. They are also appropriate to help protect many 120VAC or 240VAC motors. In addition, the LVR series is RoHS compliant.
A
CALIPER
B
CALIPER
B
CALIPER
B
CALIPER
Lead size LVR025–040 Ø 0.64 (0.025) 22 AWG LVR055 Ø 0.81 (0.032) 20 AWG
C
center-to-center
C
center-to-center
center-to-center
C
C
center-to-center
Dimensions (millimeters/inches) Part number LVR005K LVR005S LVR008K LVR008S LVR012K LVR012S LVR016K LVR016S LVR025K LVR025S LVR033K LVR033S LVR040K LVR040S LVR055K LVR055S IH (A) 0.05 0.05 0.08 0.08 0.12 0.12 0.16 0.16 0.25 0.25 0.33 0.33 0.40 0.40 0.55 0.55 IT (A) 0.12 0.12 0.19 0.19 0.30 0.30 0.37 0.37 0.56 0.56 0.74 0.74 0.90 0.90 1.25 1.25 I max. V max. 135Vac/240Vac (Vac) (A) 240 20/1.0 240 20/1.0 240 20/1.2 240 20/1.2 240 20/1.2 240 20/1.2 240 20/2.0 240 20/2.0 240 20/3.5 240 20/3.5 240 20/4.5 240 20/4.5 240 20/5.5 240 20/5.5 240 20/5.5 240 20/5.5 R1max. (Ω) 65.0 65.0 26.0 26.0 12.0 12.0 7.8 7.8 3.8 3.8 1.24 1.24 1.9 1.9 1.45 1.45 Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA A (max.) 8.3 (0.33) 8.3 (0.33) 8.3 (0.33) 8.3 (0.33) 8.3 (0.33) 8.3 (0.33) 9.9 (0.39) 9.9 (0.39) 9.6 (0.38) 9.6 (0.38) 11.4 (0.45) 11.4 (0.45) 11.5 (0.46) 11.5 (0.46) 14.0 (0.55) 14.0 (0.55) B (max.) 12.9 (0.51) 10.7 (0.43) 12.9 (0.51) 10.7 (0.43) 12.9 (0.51) 10.7 (0.43) 13.8 (0.54) 12.5 (0.50) 18.8 (0.74) 17.4 (0.69) 19.0 (0.75) 16.5 (0.65) 20.9 (0.82) 19.5 (0.77) 21.7 (0.85) 21.7 (0.85) C (nom.) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20)
Fig. 1 2 1 2 1 2 1 1 3 4 3 4 3 4 3 4
60V – 72V
ELV Compliant, RoHS Compliant
Figure 5
A B
Lead size RXEF005 Ø 0.40 (0.016) 26 AWG
Figure 6
A B
Lead size RXEF010–090 Ø 0.51 (0.020) 24 AWG
Figure 7
A B
Lead size RXEF110-375 Ø 0.81 (0.032) 20 AWG
The RXEF series devices offer hold currents ranging from 50mA to 3.75A while offering voltage ratings of 60V to 72V. The RXEF products are used in a wide range of applications such as power input, and I/O port protection. They are also used in many markets including computer/multimedia, industrial equipment and controls, consumer, general electronics and communications and networking.
C
C
C
Part number RXEF005 RXEF010 RXEF017 RXEF020 RXEF025 RXEF030 RXEF040 RXEF050 RXEF065 RXEF075 RXEF090 RXEF110 RXEF135 RXEF160 RXEF185 RXEF250 RXEF300 RXEF375
IH (A) 0.05 0.10 0.17 0.20 0.25 0.30 0.40 0.50 0.65 0.75 0.90 1.10 1.35 1.60 1.85 2.50 3.00 3.75
IT (A) 0.10 0.20 0.34 0.40 0.50 0.60 0.80 1.00 1.30 1.50 1.80 2.20 2.70 3.20 3.70 5.00 6.00 7.50
V max. (V) 60 60 60 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72
I max.** (A) 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
R1max. (Ω) 20.00 7.50 8.00 4.40 3.00 2.10 1.29 1.17 0.72 0.60 0.47 0.38 0.30 0.22 0.19 0.13 0.10 0.08
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B C (max.) (max.) (nom.) 8.0 (0.32) 8.3 (0.33) 5.08 (0.20) 7.4 (0.29) 11.6 (0.46) 5.08 (0.20) 7.4 (0.29) 12.7 (0.50) 5.08 (0.20) 7.4 (0.29) 11.7 (0.46) 5.08 (0.20) 7.4 (0.29) 12.7 (0.50) 5.08 (0.20) 7.4 (0.29) 12.7 (0.50) 5.08 (0.20) 7.6 (0.30) 13.5 (0.53) 5.08 (0.20) 7.9 (0.31) 13.7 (0.54) 5.08 (0.20) 9.4 (0.37) 14.5 (0.57) 5.08 (0.20) 10.2 (0.40) 15.2 (0.60) 5.08 (0.20) 11.2 (0.44) 15.8 (0.62) 5.08 (0.20) 12.8 (0.50) 17.5 (0.69) 5.08 (0.20) 14.5 (0.57) 19.1 (0.75) 5.08 (0.20) 16.3 (0.64) 20.8 (0.82) 5.08 (0.20) 17.5 (0.69) 22.4 (0.88) 5.08 (0.20) 20.8 (0.82) 25.4 (1.00) 10.90 (0.43) 23.9 (0.94) 28.6 (1.13) 10.90 (0.43) 27.2 (1.07) 31.8 (1.25) 10.90 (0.43)
Fig. 5 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7
** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
2
R A D I A L - L E A D E D D E V I C E S F O R E L E C T R O N I C S A P P L I C AT I O N S
33V ELV Compliant, RoHS Compliant
The RTEF series devices offer a 33V rating and tighter trip-to-hold ratios than other radial-leaded devices to help comply with the IEEE 1394 specification. These devices can also be used in other applications where the benefit of a tighter trip-tohold ratio is desired.
Figure 8
A
Lead size RTEF120–190 Ø 0.51 (0.020) 24 AWG
B
C
Part number RTEF120 RTEF135 RTEF190
IH (A) 1.20 1.35 1.90
IT (A) 2.3 2.5 3.0
V max. (V) 33 33 33
I max.** (A) 40 40 40
R1max. (Ω) 0.180 0.143 0.092
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B C (max.) (max.) (nom.) 7.4 (0.29) 12.2 (0.48) 5.08 (0.20) 7.4 (0.29) 14.2 (0.56) 5.08 (0.20) 8.9 (0.35) 13.5 (0.53) 5.08 (0.20)
Fig. 8 8 8
** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
30V
ELV Compliant, RoHS Compliant
The RUEF series devices offer hold currents from 900mA to 9.0A. They are used in many markets including computer/multimedia, industrial equipment and controls, as well as consumer and general electronics.
Figure 9
A
Lead size RUEF090–250 Ø 0.51 (0.020) 24 AWG
Figure 10
A B
Lead size RUEF300–900 Ø 0.81 (0.032) 20 AWG
B
C
C
Part number RUEF090 RUEF110 RUEF135 RUEF160 RUEF185 RUEF250 RUEF300 RUEF400 RUEF500 RUEF600 RUEF700 RUEF800 RUEF900
IH (A) 0.90 1.10 1.35 1.60 1.85 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00
IT (A) 1.8 2.2 2.7 3.2 3.7 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0
V max. (V) 30 30 30 30 30 30 30 30 30 30 30 30 30
I max.** (A) 40 40 40 40 40 40 40 40 40 40 40 40 40
R1max. (Ω) 0.22 0.17 0.13 0.11 0.09 0.07 0.08 0.05 0.05 0.04 0.03 0.02 0.02
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B C (max.) (max.) (nom.) 7.4 (0.29) 12.2 (0.48) 5.08 (0.20) 7.4 (0.29) 14.2 (0.56) 5.08 (0.20) 8.9 (0.35) 13.5 (0.53) 5.08 (0.20) 8.9 (0.35) 15.2 (0.60) 5.08 (0.20) 10.2 (0.40) 15.7 (0.62) 5.08 (0.20) 11.4 (0.45) 18.3 (0.72) 5.08 (0.20) 11.4 (0.45) 17.3 (0.68) 5.08 (0.20) 14.0 (0.55) 20.1 (0.79) 5.08 (0.20) 14.0 (0.55) 24.9 (0.98) 10.90 (0.43) 16.5 (0.65) 24.9 (0.98) 10.90 (0.43) 19.1 (0.75) 26.7 (1.05) 10.90 (0.43) 21.6 (0.85) 29.2 (1.15) 10.90 (0.43) 24.1 (0.95) 29.7 (1.17) 10.90 (0.43)
Fig. 9 9 9 9 9 9 10 10 10 10 10 10 10
** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
3
R A D I A L - L E A D E D D E V I C E S F O R E L E C T R O N I C S A P P L I C AT I O N S
16V High Temperature ELV Compliant, RoHS Compliant
Figure 11
A B
Lead size RHEF050, 100, 200 Ø 0.51 (0.020) 24 AWG
The RHEF series devices offer a high operating temperature (up to 125C) and the broadest range of hold currents available in the radial-leaded form factor (70mA to 15A). The RHEF series devices can also be advantageous for use in standard operating temperatures of up to 85C because they have a flatter thermal derating curve than other radial-leaded devices. Over the same temperature range, the trip-to-hold ratio is lower for an RHEF device compared with other PPTC devices.
Figure 12
A
Lead size RHEF070 Ø 0.51 (0.020) 24 AWG
Figure 13
A B
Lead size RHEF400-1000 Ø 0.81 (0.032) 20 AWG RHEF1300, RHEF1500 Ø 1.0 (0.04) 18 AWG
B
C
C
C
New
New
New
New
Part number RHEF 30V RHEF050 RHEF070 RHEF100 RHEF 16V RHEF200 RHEF400 RHEF450 RHEF600 RHEF650 RHEF750 RHEF900 RHEF1000 RHEF1300 RHEF1500
IH* (A) 0.5 0.7 1.0 2.0 4.0 4.5 6.0 6.5 7.5 9.0 10.0 13.0 15.0
IT (A) 0.92 1.4 1.8 3.8 7.0 7.8 10.8 12.0 13.1 16.5 18.5 24.0 28.0
V max. (Vdc) 30 30 30 16 16 16 16 16 16 16 16 16 16
I max.** (A) 40 40 40 100 100 100 100 100 100 100 100 100 100
R1max. (Ω) 1.1 0.8 0.43 0.110 0.044 0.054 0.032 0.026 0.022 0.017 0.015 0.010 0.0092
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B C (max.) (max.) (nom.) 7.4 (0.29) 6.9 (0.27) 9.7 (0.38) 9.40 11.40 10.40 11.20 12.70 14.00 16.50 17.50 23.50 23.50 12.7 (0.50) 10.8 (0.43) 13.6 (0.54) 14.4 18.0 15.6 21.0 22.2 23.5 25.7 26.5 28.7 28.7 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 5.08 5.08 5.08 5.08 5.08 5.08 10.90 10.90 10.90
Fig.
11 12 11 11 13 13 13 13 13 13 13 13 13
(0.37) (0.45) (0.41) (0.44) (0.50) (0.55) (0.65) (0.69) (0.925) (0.925)
(0.57) (0.71) (0.61) (0.83) (0.88) (0.93) (1.01) (1.04) (1.13) (1.13)
(0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.43) (0.43) (0.43)
* Hold current @ 25°C. ** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
16V High Temperature
ELV Compliant, RoHS Compliant
The RGEF series devices are rated for 16V and have hold current ranges of 2.5A to 14A. These parts are smaller and trip faster than the RUEF devices with the same hold currents. In addition, they have tight trip-tohold ratios. If the application requires 16V rather than 30V and there are limitations on space, the RGEF devices can be the preferred choice. Like the RXEF and RUEF series devices, the RGEF devices are used in many markets including computer/multimedia, industrial equipment and controls, consumer and general electronics, as well as motor protection.
Figure 14
A
Lead size RGEF250 Ø 0.51 (0.020) 24 AWG
Figure 15
A B
Lead size RGEF300-RGE1100 Ø 0.81 (0.032) 20 AWG RGEF1200-RGE1400 Ø 1.0 (0.04) 18 AWG
B
C
C
Part number RGEF250 RGEF300 RGEF400 RGEF500 RGEF600 RGEF700 RGEF800 RGEF900 RGEF1000 RGEF1100 RGEF1200 RGEF1400
IH* (A) 2.5 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 14.0
IT (A) 4.7 5.1 6.8 8.5 10.2 11.9 13.6 15.3 17.0 18.7 20.4 23.8
V max. (Vdc) 16 16 16 16 16 16 16 16 16 16 16 16
I max.** (A) 100 100 100 100 100 100 100 100 100 100 100 100
R1max. (Ω) 0.0530 0.0980 0.0600 0.0340 0.0280 0.0220 0.0175 0.0135 0.0102 0.0089 0.0086 0.0064
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B C (max.) (max.) (nom.) 8.9 (0.35) 12.8 (0.50) 5.08 (0.20) 7.1 (0.28) 11.0 (0.43) 5.08 (0.20) 8.9 (0.35) 12.8 (0.50) 5.08 (0.20) 10.4 (0.41) 14.3 (0.56) 5.08 (0.20) 10.7 (0.42) 17.1 (0.67) 5.08 (0.20) 11.2 (0.44) 19.7 (0.78) 5.08 (0.20) 12.7 (0.50) 20.9 (0.82) 5.08 (0.20) 14.0 (0.55) 21.7 (0.85) 5.08 (0.20) 16.5 (0.65) 25.2 (0.99) 5.08 (0.20) 17.5 (0.69) 26.0 (1.02) 5.08 (0.20) 17.5 (0.69) 28.0 (1.10) 10.90 (0.43) 23.5 (0.92) 27.9 (1.10) 10.90 (0.43)
Fig. 14 15 15 15 15 15 15 15 15 15 15 15
* Hold current @ 25°C. ** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
4
R A D I A L - L E A D E D D E V I C E S F O R E L E C T R O N I C S A P P L I C AT I O N S
16V High Temperature ELV Compliant, RoHS Compliant
Figure 16
A
Lead size Ø 0.51 (0.020) 24 AWG
The RUSBF series devices were developed for the USB serial bus specification in computer and multimedia applications.
B
C
Part number RUSBF090 RUSBF110 RUSBF135 RUSBF160 RUSBF185 RUSBF250
IH (A) 0.90 1.10 1.35 1.60 1.85 2.50
IT (A) 1.8 2.2 2.7 3.2 3.7 5.0
V max. (V) 16 16 16 16 16 16
I max.** (A) 40 40 40 40 40 40
R1max. (Ω) 0.18 0.14 0.12 0.11 0.09 0.06
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B C (max.) (max.) (nom.) 7.4 (0.29) 12.2 (0.48) 5.08 (0.20) 7.4 (0.29) 14.2 (0.56) 5.08 (0.20) 8.9 (0.35) 13.5 (0.53) 5.08 (0.20) 8.9 (0.35) 15.2 (0.60) 5.08 (0.20) 10.2 (0.40) 15.7 (0.62) 5.08 (0.20) 11.4 (0.45) 18.3 (0.72) 5.08 (0.20)
Fig. 16 16 16 16 16 16
** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
6V
ELV Compliant, RoHS Compliant
The RUSBF series devices were developed for the USB serial bus specification in computer and multimedia applications. These 6V products are particularly well suited for USB computer monitor protection applications where through-hole devices are still the preferred solution.
Figure 17
A B
Lead size Ø 0.51 (0.020) 24 AWG
C
Part number RUSBF075 RUSBF120 RUSBF155
IH (A) 0.75 1.20 1.55
IT (A) 1.30 2.00 2.65
V max. (V) 6 6 6
I max.** (A) 40 40 40
R1max. (Ω) 0.23 0.14 0.10
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B C (max.) (max.) (nom.) 6.9 (0.27) 11.4 (0.45) 5.08 (0.20) 6.9 (0.27) 11.7 (0.46) 5.08 (0.20) 6.9 (0.27) 11.7 (0.46) 5.08 (0.20)
Fig. 17 17 17
** Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated.
5
TELECOM AND BROADBAND PRODUCTS
These product lines consist of radial-leaded and surface-mount devices that help protect against short duration high voltage faults (250-600Vrms). TR and TS products are designed to help meet the protection needs of telecommunications applications. BBR devices help provide overcurrent protection of the power tap in hybrid-coaxial applications.
Figure 2
A B φ 0.65mm E φ 0.65mm D E C A
Figure 1
B
TR250
Part number TR250-080T TR250-080U TR250-110U TR250-120 TR250-120T TR250-120T-RA TR250-120T-RC TR250-120T-RF TR250-120T-R1 TR250-120T-R2 TR250-120U TR250-120UT TR250-145 TR250-145-RA TR250-145-RB TR250-145T TR250-145U TRF250-180† IH (A) 0.080 0.080 0.110 0.120 0.120 0.120 0.130 0.120 0.120 0.120 0.120 0.120 0.145 0.145 0.145 0.145 0.145 0.180 IT (A) 0.160 0.160 0.220 0.240 0.240 0.240 0.240 0.240 0.240 0.240 0.240 0.240 0.290 0.290 0.290 0.290 0.290 0.650 V max. Operating (Vdc) 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 100 V max. Interrupt (Vrms) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 I max. (A) 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 10.0 R min. (Ω) 15.0 14.0 5.0 4.0 7.0 7.0 5.4 6.0 6.0 8.0 6.0 7.0 3.0 3.0 4.5 5.4 3.5 0.8 R max. (Ω) 22.0 20.0 9.0 8.0 12.0 9.0 7.5 10.5 9.0 10.5 10.0 12.0 6.0 5.5 6.0 7.5 6.5 2.2 R1 max. (Ω) 33.0 33.0 16.0 16.0 16.0 16.0 14.0 16.0 16.0 16.0 16.0 16.0 14.0 12.0 14.0 14.0 12.0 4.0 Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA Fig. 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1
These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for application details. Most products are available in binned versions for resistance-matched applications. Please see Raychem Circuit Protection Databook for performance details. † F is for RoHS compliant devices.
Part number TR250-080T TR250-080U TR250-110U TR250-120 TR250-120U TR250-145 TR250-145U TRF250-180
Dimensions (millimeters/inches) A B (max.) (max.) 5.8 (0.228) 9.9 (0.390) 4.8 (0.189) 9.3 (0.366) 5.3 (0.210) 9.4 (0.370) 6.5 (0.256) 11.0 (0.433) 6.0 (0.236) 10.0 (0.394) 6.5 (0.256) 11.0 (0.433) 6.0 (0.236) 10.0 (0.394) 9.0 (0.354) 12.0 (0.472)
C (max.) 4.6 (0.181) 3.8 (0.150) 3.8 (0.150) 4.6 (0.180) 3.8 (0.150) 4.6 (0.180) 3.8 (0.150) 3.8 (0.150)
D (min.) 4.7 (0.185) 4.7 (0.185) 4.7 (0.185) 4.7 (0.185) 4.7 (0.185) 4.7 (0.185) 4.7 (0.185) 4.7 (0.185)
E (typ.) 5.0 (0.197) 5.0 (0.197) 5.0 (0.197) 5.0 (0.197) 5.0 (0.197) 5.0 (0.197) 5.0 (0.197) 5.0 (0.197)
Fig. 1 1 1 2 2 2 2 1
6
TELECOM AND BROADBAND PRODUCTS
TS250
Figure 3 Figure 4 Figure 5
A C
C C D top view A side view E B B D A
D
B
E
Coming Soon Coming Soon Coming Soon Coming Soon
Coming Soon
Coming Soon
Part number TS250-130 TS250-130-RA TS250-130-RB TS250-130-RC TS250-130F TS250-130F-RA TS250-130F-RB TS250-130F-RC TSL250-080 TSL250-080F TSV250-130 TSV250-130F
IH (A) 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.080 0.080 0.130 0.130
IT (A) 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.160 0.160 0.260 0.260
V max. Operating (Vdc) 60 60 60 60 60 60 60 60 80 80 60 60
V max. Interrupt (Vrms) 250 (650) 250 (650) 250 (650) 250 (650) 250 (650) 250 (650) 250 (650) 250 (650) 250 250 250 250
I max. (A) 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
R min. (Ω) 6.5 6.5 9.0 7.0 6.5 6.5 9.0 7.0 5.0 5.0 4.0 4.0
R max. (Ω) 12.0 9.0 12.0 10.0 12.0 9.0 12.0 10.0 11.0 11.0 7.0 7.0
R1 max. (Ω) 20.0 15.0 20.0 17.0 20.0 15.0 20.0 17.0 20.0 20.0 12.0 12.0
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Fig. 3 3 3 3 3 3 3 3 4 4 5 5
These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for application details. Most products are available in binned versions for resistance-matched applications. Please see Raychem Circuit Protection Databook for performance details.
Coming Soon Coming Soon Coming Soon Coming Soon
Part number TS250-130 TS250-130-RA TS250-130-RB TS250-130-RC TS250-130F TS250-130F-RA TS250-130F-RB TS250-130F-RC
Dimensions (millimeters/inches) A B (max.) (max.) 9.4 (0.370) 3.4 (0.135) 9.4 (0.370) 3.4 (0.135) 9.4 (0.370) 3.4 (0.135) 9.4 (0.370) 3.4 (0.135) 9.4 (0.370) 3.4 (0.135) 9.4 (0.370) 3.4 (0.135) 9.4 (0.370) 3.4 (0.135) 9.4 (0.370) 3.4 (0.135)
C (max.) 7.4 (0.290) 7.4 (0.290) 7.4 (0.290) 7.4 (0.290) 7.4 (0.290) 7.4 (0.290) 7.4 (0.290) 7.4 (0.290)
D (typ.) 0.3 (0.011) 0.3 (0.011) 0.3 (0.011) 0.3 (0.011) 0.3 (0.011) 0.3 (0.011) 0.3 (0.011) 0.3 (0.011)
Fig. 3 3 3 3 3 3 3 3
Part number TSL250-080 Coming Soon TSL250-080F TSV250-130 Coming Soon TSV250-130F
Dimensions (millimeters/inches) A B (max.) (max.) 7.9 (0.310) 3.7 (0.145) 7.9 (0.310) 3.7 (0.145) 6.1 (0.240) 6.9 (0.270) 6.1 (0.240) 6.9 (0.270)
C (max.) 5.3 (0.210) 5.3 (0.210) 3.0 (0.126) 3.0 (0.126)
D (max.) 0.4 (0.015) 0.4 (0.015) 1.9 (0.075) 1.9 (0.075)
E (max.) 3.1 (0.120) 3.1 (0.120) 2.3 (0.091) 2.3 (0.091)
Fig. 4 4 5 5
TR600
Figure 6
A
C B
φ 0.65mm D E
New
Part number TRF600-150* TRF600-150-RB* TR600-160 TR600-160-RA TR600-160-R1
IH (A) 0.150 0.130 0.160 0.160 0.160
IT (A) 0.300 0.260 0.320 0.320 0.320
V max. Operating (Vdc) 250 250 250 250 250
V max. Interrupt (Vrms) 600 600 600 600 600
I max. (A) 3.0 3.0 3.0 3.0 3.0
R min. (Ω) 6.0 9.0 4.0 4.0 4.0
R max. (Ω) 10.0 12.0 10.0 7.0 8.0
R1 max. (Ω) 17.0 20.0 18.0 16.0 17.0
Agency recognition Pending UL, CSA UL, CSA UL, CSA UL, CSA
Fig. 6 6 6 6 6
These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for application details. Most products are available in binned versions for resistance-matched applications. Please see Raychem Circuit Protection Databook for performance details. * These parts are RoHS compliant. TRF600-150 replaces TR600-150 and TR600-150-RA devices in new designs. TRF600-150-RB replaces TR600-150-RB devices in new designs.
Part number TRF600-150* TR600-160
Dimensions (millimeters/inches) A B (max.) (max.) 9.0 (0.354) 12.5 (0.492) 16.0 (0.630) 12.6 (0.496)
C (max.) 4.6 (0.180) 6.0 (0.236)
D (min.) 4.7 (0.185) 4.7 (0.185)
E (max.) 5.0 (0.197) 5.0 (0.197)
Fig. 6 6
* This part is RoHS compliant and replaces TR600-150 and TR600-150-RA devices in new designs.
7
TELECOM AND BROADBAND PRODUCTS
TS600
Figure 7 Figure 8
C
B F D A D E E G
New New
New New
Part number TS600-170 TS600-200-RA-B-0.5 TS600-170F* TS600-200F-RA-B-0.5* TSM600-250 TSM600-250-RA TSM600-250F* TSM600-250F-RA*
IH (A) 0.170 0.200 0.170 0.200 0.250 0.250 0.250 0.250
IT (A) 0.400 0.400 0.400 0.400 0.860 0.860 0.860 0.860
V max. Operating (Vdc) 60 60 60 60 250 250 250 250
V max. Interrupt (Vrms) 600 600 600 600 600 600 600 600
I max. (A) 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
R min. (Ω) 4.0 4.0 4.0 4.0 1.0 1.0 1.0 1.0
R max. R1 max. (Ω) (Ω) 9.0 18.0 7.5 13.5 9.0 18.0 7.5 13.5 3.5 (typ.) 7.0 3.0 (typ.) 5.0 3.5 (typ.) 7.0 3.0 (typ.) 5.0
Agency recognition UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA UL, CSA
Fig. 7 7 7 7 8 8 8 8
These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for application details. * These parts are the RoHS compliant versions; they should be used for new designs.
New New
Part number TS600-170 TS600-200-RA-B-0.5 TS600-170F* TS600-200F-RA-B-0.5*
Dimensions (millimeters/inches) A B (max.) (max.) 19.4 (0.765) 12.3 (0.485) 19.4 (0.765) 12.3 (0.485) 19.4 (0.765) 12.3 (0.485) 19.4 (0.765) 12.3 (0.485)
C (max.) 8.3 (0.325) 8.3 (0.325) 8.3 (0.325) 8.3 (0.325)
Fig. 7 7 7 7
* These parts are the RoHS compliant versions; they should be used for new designs.
New New
Part number TSM600-250 TSM600-250-RA TSM600-250F* TSM600-250F-RA*
Dimensions (millimeters/inches) A B (max.) (max.) 17.6 (0.691) 11.7 (0.460) 17.6 (0.691) 11.7 (0.460) 17.6 (0.691) 11.7 (0.460) 17.6 (0.691) 11.7 (0.460)
C (max.) 11.2 (0.440) 11.2 (0.440) 11.2 (0.440) 11.2 (0.440)
D (max.) 5.2 (0.230) 5.2 (0.230) 5.2 (0.230) 5.2 (0.230)
E (max.) 2.8 (0.111) 2.8 (0.111) 2.8 (0.111) 2.8 (0.111)
F (max.) 1.0 (0.038) 1.0 (0.038) 1.0 (0.038) 1.0 (0.038)
G (min.) 2.0 (0.080) 2.0 (0.080) 2.0 (0.080) 2.0 (0.080)
Fig. 8 8 8 8
BBR
Figure 9
A B D C
Lead size Ø 0.81 (0.032) 20 AWG
Part number BBR550 BBR750
IH (A) 0.55 0.75
IT (A) 1.1 1.5
V max. (Vdc) 99 99
I max. (A) 20 20
R min. (Ω) 0.80 0.40
R max. (Ω) 1.30 0.75
R1 max. (Ω) 1.95 1.20
Agency recognition UL, CSA UL, CSA
Fig. 9 9
These products are intended for telecom applications. For continuous line voltage applications, see LVR product line. Please see the Raychem Circuit Protection Databook for application details.
Part number BBR550 BBR750
Dimensions (millimeters/inches) A B (max.) (max.) 10.9 (0.43) 14.0 (0.55) 11.9 (0.47) 15.5 (0.61)
C (nom.) 5.80 (0.23) 5.80 (0.23)
D (min.) 7.6 (0.3) 7.6 (0.3)
Fig. 9 9
8
S U R F A C E - M O U N T D E V I C E S F O R E L E C T R O N I C A P P L I C AT I O N S
These product lines are designed for surface-mount applications. The variety of sizes enables installation in limited space applications such as crowded printed circuit boards, digital cameras, PC cards, subnotebook computers, computer peripheral equipment, and general electronics. These devices are designed for applications where such space is constrained and resettable circuit protection is desired.
Figure 1
D E D E
C
A
B
Top view
Side view
nanoSMDC Series Size: 3216 (mm), 1206 (mils)
Part number
Coming Soon nanoSMDC012F* Coming Soon nanoSMDC016F*
ELV Compliant, RoHS Compliant
I max. (A) 10 10 100 20 100 100 100 100 100 Rmin (Ω) 1.40 1.10 0.65 0.45 0.20 0.12 0.07 0.04 0.02 R1 max. (Ω) 6.50 5.00 2.60 1.40 0.80 0.40 0.20 0.11 0.07 Agency recognition Pending Pending UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA Pending Dimensions (millimeters/inches) A B C (max.) (max.) (max.) 3.4 (0.134) 3.4 (0.134) 3.4 (0.134) 3.4 (0.134) 3.4 (0.134) 3.4 (0.134) 3.4 (0.134) 3.4 (0.134) 3.4 (0.134) 1.00 (0.039) 1.00 (0.039) 0.64 (0.025) 0.64 (0.025) 0.64 (0.025) 0.48 (0.019) 1.00 (0.039) 0.89 (0.035) 1.25 (0.049) 1.8 (0.071) 1.8 (0.071) 1.8 (0.071) 1.8 (0.071) 1.8 (0.071) 1.8 (0.071) 1.8 (0.071) 1.8 (0.071) 1.8 (0.071) D (min.) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) E (min.) 0.076 (0.003) 0.076 (0.003) 0.076 (0.003) 0.076 (0.003) 0.076 (0.003) 0.076 (0.003) 0.076 (0.003) 0.076 (0.003) 0.076 (0.003)
IH (A) 0.12 0.16 0.20 0.35 0.50 0.75 1.10 1.50 2.00
IT
(A) 0.30 0.40 0.42 0.75 1.10 1.50 2.20 3.00 4.00
V max. (Vdc) 30 30 24 16 13.2 6 6 6 6
Fig.
1 1 1 1 1 1 1 1 1
nanoSMDC020F nanoSMDC035F nanoSMDC050F/13.2 nanoSMDC075F nanoSMDC110F nanoSMDC150F
Coming Soon nanoSMDC200F*
* Data is preliminary.
microSMD Series Size: 3225 (mm), 1210 (mils)
Part number microSMD005F microSMD010F microSMD035F microSMD050F microSMD075F microSMD110F microSMD150F
New microSMD175F
ELV Compliant, RoHS Compliant
I max. (A) 10 10 40 40 40 40 40 40 Rmin (Ω) 3.6 2.10 0.32 0.25 0.11 0.07 0.04 0.02 R1 max. (Ω) 50.0 15.00 1.30 0.90 0.40 0.21 0.11 0.08 Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA Dimensions (millimeters/inches) A B C (max.) (max.) (max.) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 3.43 (0.135) 0.85 (0.034) 0.85 (0.034) 0.62 (0.025) 0.62 (0.025) 0.62 (0.025) 0.48 (0.019) 1.22 (0.048) 0.76 (0.030) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) D (min.) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) E (min.) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008)
IH (A) 0.05 0.10 0.35 0.50 0.75 1.10 1.50 1.75
IT
(A) 0.15 0.25 0.75 1.00 1.50 2.20 3.00 3.50
V max. (Vdc) 30 30 6 13.2 6 6 6 6
Fig.
1 1 1 1 1 1 1 1
miniSMDC Series Size: 4532 (mm), 1812 (mils)
Part number miniSMDC014F miniSMDC020F miniSMDC050F miniSMDC075F
New miniSMDC075F/24
ELV Compliant, RoHS Compliant
I max. (A) 10 10 100 100 40 100 100 20 100 100 100 100 20 100 100 100 100 100 Rmin (Ω) 1.500 0.600 0.150 0.110 0.090 0.040 0.060 0.060 0.050 0.050 0.040 0.040 0.040 0.030 0.020 0.015 0.015 0.015 R1 max. (Ω) 6.000 3.300 1.000 0.450 0.290 0.210 0.180 0.180 0.140 0.140 0.110 0.110 0.120 0.100 0.070 0.043 0.047 0.047 Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA Pending Dimensions (millimeters/inches) A B C (max.) (max.) (max.) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 4.73 (0.186) 0.89 (0.035) 0.89 (0.035) 0.62 (0.025) 0.62 (0.025) 1.07 (0.042) 0.62 (0.025) 0.48 (0.019) 1.07 (0.042) 0.48 (0.019) 0.48 (0.019) 0.48 (0.019) 0.48 (0.019) 1.50 (0.060) 0.48 (0.019) 1.22 (0.048) 1.25 (0.050) 1.25 (0.050) 1.25 (0.050) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) 3.41 (0.134) D (min.) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) 0.25 (0.010) E (min.) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008) 0.20 (0.008)
IH (A) 0.14 0.20 0.50 0.75 0.75 1.10 1.10 1.10 1.25 1.25 1.50 1.50 1.50 1.60 2.00 2.60 2.60 2.60
IT
(A) 0.34 0.40 1.00 1.50 1.50 2.20 2.20 2.20 2.50 2.50 3.00 3.00 3.00 3.20 4.00 5.00 5.00 5.00
V max. (Vdc) 60 30 24 13.2 24 8 16 24 6 16 6 12 24 9 8 6 12 16
Fig.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
miniSMDC110F miniSMDC110F/16
New miniSMDC110F/24
miniSMDC125F miniSMDC125F/16 miniSMDC150F
New miniSMDC150F/12 New miniSMDC150F/24
miniSMDC160F miniSMDC200F miniSMDC260F miniSMDC260F/12
Coming Soon miniSMDC260F/16*
* Data is preliminary.
miniSMDE Series Size: 11550 (mm), 4420 (mils)
Part number
New miniSMDE190F
ELV Compliant, RoHS Compliant
I max. (A) 100 Rmin (Ω) 0.024 R1 max. (Ω) 0.080 Agency recognition UL, TÜV, CSA Dimensions (millimeters/inches) A B C (max.) (max.) (max.) 11.51 (0.453) 0.53 (0.021) 5.33 (0.210) D (min.) E (min.)
IH (A) 1.90
IT
(A) 3.80
V max. (Vdc) 16
Fig.
0.510 (0.020) 0.381 (0.015)
1
9
S U R F A C E - M O U N T D E V I C E S F O R E L E C T R O N I C A P P L I C AT I O N S
These product lines are also designed for surfacemount applications. The products range in hold currents from 0.3A to 3.0A and voltages from 6V to 60V. These devices are suited for high-density board applications in computer and computer peripheral products, telecommunications, and general electronics applications. They are designed to be reflowed onto a printed circuit board using standard surface-mount processes.
Figure 2
B C C
A
Side view
End view
End view
(midSMD products only)
midSMD Series Size: 5050 (mm), 2018 (mils)
Part number SMD030F-2018
New decaSMDC050F/60
ELV Compliant, RoHS Compliant
I max. (A) 20 10 40 40 40 Rmin (Ω) 0.500 0.40 0.100 0.070 0.048 R1 max. (Ω) 2.30 1.10 0.40 0.18 0.10 Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA Dimensions (millimeters/inches) A B C (max.) (max.) (max.) 5.44 (0.214) 5.31 (0.209) 5.44 (0.214) 5.44 (0.214) 5.44 (0.214) 1.78 (0.070) 0.89 (0.035) 1.52 (0.060) 1.52 (0.060) 1.52 (0.060) 4.93 (0.194) 4.80 (0.189) 4.93 (0.194) 4.93 (0.194) 4.93 (0.194) 0.25 (0.010) 0.20 (0.008) D (min.) E (min.)
IH (A) 0.30 0.55 1.10 1.50 2.00
IT
(A) 0.80 1.10 2.20 3.00 4.20
V max. (Vdc) 60 60 15 15 6
Fig.
2 1 2 2 2
SMD100F-2018 SMD150F-2018 SMD200F-2018
SMD Series Size: 7555 (mm), 2920 (mils)
Part number SMD030F SMD050F SMD075F SMD075F/60 SMD100F SMD100F/33
New SMDH120
ELV Compliant, RoHS Compliant
V max. (Vdc) 60 60 30 60 30 33 16 15 6 6 I max. (A) 10 10 40 10 40 40 50 40 40 40 Rmin (Ω) 1.20 0.350 0.350 0.350 0.120 0.120 0.150 0.070 0.025 0.015 R1 max. (Ω) 4.800 1.400 1.000 1.000 0.480 0.410 0.340 0.250 0.075 0.048 Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA Pending UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA Dimensions (millimeters/inches) A B C (max.) (max.) (max.) 7.98 (0.314) 7.98 (0.314) 7.98 (0.314) 7.98 (0.314) 7.98 (0.314) 7.98 (0.314) 7.98 (0.314) 7.98 (0.314) 7.98 (0.314) 7.98 (0.314) 3.18 (0.125) 3.18 (0.125) 3.18 (0.125) 3.18 (0.125) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 5.44 (0.214) 5.44 (0.214) 5.44 (0.214) 5.44 (0.214) 5.44 (0.214) 5.44 (0.214) 5.44 (0.214) 5.44 (0.214) 5.44 (0.214) 5.44 (0.214)
IH (A) 0.30 0.50 0.75 0.75 1.10 1.10 1.20 1.25 2.60 3.00
IT
(A) 0.60 1.00 1.50 1.50 2.20 2.20 1.50 2.50 5.20 6.00
Fig.
2 2 2 2 2 2 2 2 2 2
SMD125F SMD260F SMD300F
SMD2 Series Size: 8763 (mm), 3425 (mils)
Part number SMD150F SMD150F/33 SMDH160 SMD185F SMD200F SMD250F IH (A) 1.50 1.50 1.60 1.80 2.00 2.50
ELV Compliant, RoHS Compliant
I max. (A) 40 40 70 40 40 40 Rmin (Ω) 0.060 0.080 0.050 0.065 0.050 0.035 R1 max. (Ω) 0.250 0.230 0.150 0.165 0.125 0.085 Agency recognition UL, TÜV, CSA UL, TÜV, CSA Pending UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA Dimensions (millimeters/inches) A B C (max.) (max.) (max.) 9.40 (0.370) 9.40 (0.370) 9.40 (0.370) 9.40 (0.370) 9.40 (0.370) 9.40 (0.370) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 6.71 (0.264) 6.71 (0.264) 6.71 (0.264) 6.71 (0.264) 6.71 (0.264) 6.71 (0.264) Fig.
IT
(A) 3.00 3.00 3.20 3.60 4.00 5.00
V max. (Vdc) 15 33 16 33 15 15
2 2 2 2 2 2
10
D E V I C E S F O R B AT T E R Y PA C K A P P L I C AT I O N S
VLR: 85˚C Typical Activation
This product line is designed for battery pack applications. Several material platforms are available to help meet the specific protection needs of different cell chemistries (e.g. Li-ion, NiMH, and NiCd). A variety of space efficient form factors helps the designer minimize pack size.
ELV Compliant, RoHS Compliant
Figure 1
A C
Figure 2
Slit: 0.5 mm x 4.0 mm nom. .02 in x .16 in
A C
Figure 3
A C
B
B
B
Top View
Side View
Top View
Side View
Top View
Side View
Part number VLR170F VLR170L† VLR170UF VLR175F VLR175LF VLR175UF VLR230F VLR230-C36† VLR230S† VLR230SU† VLR230UF
IH* (A) 1.7 1.7 1.7 1.75 1.75 1.75 2.3 2.3 2.3 2.3 2.3
IT (A) 4.1 4.1 4.1 4.2 4.2 4.2 5 5 5 5 5
V max. (Vdc) 12 12 12 12 12 12 12 12 12 12 12
I max. (A) 100 100 100 100 100 100 100 100 100 100 100
R max. initial (Ω) 0.032 0.032 0.032 0.031 0.031 0.031 0.018 0.018 0.018 0.018 0.018
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B (max.) (max.) 23.2 (0.913) 3.9 (0.153) 41.2 (1.622) 3.9 (0.153) 23.2 (0.913) 3.7 (0.146) 24.5 (0.965) 3.3 (0.130) 31.7 (1.248) 3.3 (0.130) 24.5 (0.96) 3.1 (0.12) 23.1 (0.909) 5.3 (0.208) 27.7 (1.091) 3.9 (0.153) 23.1 (0.909) 5.3 (0.208) 23.1 (0.909) 5.1 (0.201) 23.1 (0.909) 5.1 (0.201)
C (max.) 0.8 (0.032) 0.8 (0.032) 0.7 (0.028) 0.8 (0.032) 0.8 (0.032) 0.7 (0.028) 0.8 (0.032) 0.8 (0.032) 0.8 (0.032) 0.7 (0.028) 0.7 (0.028)
Fig. 1 1 3 1 1 3 1 1 2 2 3
* Hold current @ 25°C. † Please contact Raychem Circuit Protection for RoHS compliant version.
VLP: 90˚C Typical Activation
ELV Compliant, RoHS Compliant
Figure 4
A C
A C
Providing both overcurrent and overtemperature protection, the low-resistance characteristics of the VLP devices help battery pack designers lower pack impedance. In addition, the VLP devices narrow, low-profile form factor and axial leads allow them to be welded directly to battery cells, conserving valuable space in portable electronics applications.
Figure 5
B
B
Top View
Side View
Top View
Side View
Part number VLP210† VLP220F VLP270F
IH* (A) 2.1 2.2 2.7
IT (A) 5 5.3 6.5
V max. (Vdc) 16 16 16
I max. (A) 60 60 60
R max. initial (Ω) 0.030 0.029 0.018
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B (max.) (max.) 17.5 (0.689) 7.3 (0.287) 23.3 (0.917) 3.9 (0.154) 23.1 (0.909) 5.3 (0.208)
C (max.) 0.8 (0.032) 0.8 (0.032) 0.8 (0.032)
Fig. 4 5 5
* Hold current @ 25°C. † Please contact Raychem Circuit Protection for RoHS compliant version.
11
D E V I C E S F O R B AT T E R Y PA C K A P P L I C AT I O N S
VTP: 90˚C Typical Activation
The conductive polymer composite in the VTP battery overcurrent protection devices helps provide increased safety with extended battery run time. These devices reach a high-resistance state at lower temperatures in NiMH and rechargeable lithium temperaturesensitive chemistries.
ELV Compliant, RoHS Compliant
Figure 6
A C
Figure 7
A
Figure 8
A C
B
B
B
Top View
Side View
Top View
Side View
Top View
Side View
Figure 9
Slit: 0.5 mm x 4.0 mm nom. .02 in x .16 in
A C
Figure 10
Slit: 0.5 mm x 4.0 mm nom. .02 in x .16 in
A C
Figure 11
A C
B
B
B
Top View
Side View
Top View
Side View
Top View
Side View
Part number VTP110F VTP170F VTP170X† VTP170XSF VTP175LF VTP175UF VTP200GF VTP200U† VTP210GF VTP210LF VTP210SF VTP210SLF VTP210SL-19.2/5.8† VTP210SSF VTP210ULD† VTP240F
* Hold current @ 25°C.
IH* (A) 1.1 1.7 1.7 1.7 1.75 1.75 2.0 2.0 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.4
IT (A) 2.7 3.4 3.4 3.4 3.6 3.6 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 5.9
V max. (Vdc) 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16
I max. (A) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
R max. initial (Ω) 0.070 0.052 0.052 0.052 0.051 0.051 0.039 0.039 0.030 0.030 0.030 0.030 0.030 0.030 0.030 0.026
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B (max.) (max.) 25.6 (1.007) 2.9 (0.114) 17.5 (0.689) 7.4 (0.292) 22.9 (0.90) 5.3 (0.21) 22.9 (0.90) 5.3 (0.21) 28.0 (1.10) 3.9 (0.15) 23.2 (0.91) 3.7 (0.15) 23.1 (0.91) 4.5 (0.18) 23.1 (0.91) 4.3 (0.17) 23.1 (0.91) 5.3 (0.21) 26.0 (1.02) 5.3 (0.21) 23.1 (0.91) 5.3 (0.21) 32.0 (1.26) 5.3 (0.21) 37.0 (1.46) 5.3 (0.21) 23.1 (0.91) 5.3 (0.21) 25.2 (1.00) 5.1 (0.20) 26.2 (1.03) 5.3 (0.21)
C (max.) 0.7 (0.028) 0.8 (0.03) 0.8 (0.03) 0.8 (0.03) 0.8 (0.03) 0.7 (0.03) 0.8 (0.03) 0.7 (0.03) 0.8 (0.03) 0.8 (0.03) 0.8 (0.03) 0.8 (0.03) 0.8 (0.03) 0.8 (0.03) 0.8 (0.03) 0.8 (0.03)
Fig. 11 6 8 9 8 11 8 11 8 8 9 9 9 10 11 8
† Please contact Raychem Circuit Protection for RoHS compliant version.
LTP, miniSMDE: 110˚C Typical Activation
LTP devices help provide reliable, noncycling protection for rechargeable batteries. LTP devices also help provide additional protection at elevated temperatures.
ELV Compliant, RoHS Compliant
Figure 12
A B C
Figure 13
Slit: 0.5 mm x 4.0 mm nom. .02 in x .16 in A C B
Figure 14
Slit: 0.5 mm x 4.0 mm nom. .02 in x .16 in A C B
Figure 15
D E D E
C
Top View
Side View Top View Side View Top View Side View
A B
Top View
Side View
Part number LTP LTP070† LTP070SF LTP100F LTP100SF LTP100SL† LTP100SS† LTP180F LTP180LF LTP180S† LTP190F LTP260† LTP300F LTP340† miniSMDE miniSMDE190F
IH (A) 0.7 0.7 1.0 1.0 1.0 1.0 1.8 1.8 1.8 1.9 2.6 3.0 3.4 1.9
IT (A) 1.45 1.45 2.5 2.5 2.5 2.5 3.8 3.8 3.8 4.2 5.2 6.3 6.8 3.8
V max. (Vdc) 15 15 24 24 24 24 24 24 24 24 24 24 24 16
I max. (A) 100 100 100 100 100 100 100 100 100 100 100 100 100 100
R max. initial (Ω) 0.200 0.200 0.130 0.130 0.130 0.130 0.068 0.068 0.068 0.057 0.042 0.031 0.027 0.040
Agency recognition UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B C (max.) (max.) (max.) 22.1 22.1 23.1 23.1 32.0 23.1 26.0 37.5 26.0 23.4 26.0 31.8 26.0
Fig.
(0.87) (0.87) (0.91) (0.91) (1.26) (0.91) (1.02) (1.48) (1.02) (0.92) (1.02) (1.25) (1.02)
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 11.0 11.9 13.5 15.9
(0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.43) (0.47) (0.53) (0.63)
1.2 1.2 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.1 1.0 1.1 1.0
(0.048) (0.048) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04)
12 13 12 13 13 14 12 12 13 12 12 12 12 15
11.51 (0.453)
0.53 (0.021)
5.33 (0.21)
† Please contact Raychem Circuit Protection for RoHS compliant version.
12 12
D E V I C E S F O R B AT T E R Y PA C K A P P L I C AT I O N S
LR4, SRP: 120˚C Typical Activation
The LR4 devices’ smaller thermal mass means reduced reaction time to overcurrent events. The LR4 devices are suited for battery packs intended for computer and camcorder applications. The SRP products help provide reliable, non-cycling protection for rechargeable batteries. Weldable nickel leads and a narrow, low-profile design make these devices easy to install directly onto battery cells.
ELV Compliant, RoHS Compliant
Figure 16
A
Figure 17
Slit: 0.5 mm x 4.0 mm nom. .02 in x .16 in
C A C
Figure 18
A C
B
B
B
Top View
Side View
Top View
Side View
Top View
Side View
Figure 19
A B C
Figure 20
Slit: 0.5 mm x 4.0 mm nom. .02 in x .16 in A B C
Figure 21
Slit: 0.5 mm x 4.0 mm nom. .02 in x .16 in A B C
Top View
Side View
Top View
Side View
Top View
Side View
Part number LR4 LR4-170UF LR4-190F LR4-190S† LR4-260F LR4-260SF LR4-380F LR4-380X† LR4-450F LR4-550F LR4-600F LR4-600X† LR4-730F LR4-880SS† LR4-900F LR4-1300SSF LR4-1410† SRP SRP120F SRP120L† SRP120SF SRP175F SRP175LF SRP175SF SRP175SS† SRP200F SRP350F SRP420F
IH (A) 1.7 1.9 1.9 2.6 2.6 3.8 3.8 4.5 5.5 6.0 6.0 7.3 8.8 9.0 13.0 14.1 1.2 1.2 1.2 1.75 1.75 1.75 1.75 2.0 3.5 4.2
IT (A) 3.4 3.9 3.9 5.8 5.8 8.3 8.3 8.9 10.5 11.7 11.7 14.1 16 16.7 21.2 26.2 2.7 2.7 2.7 3.8 3.8 3.8 3.8 4.4 6.3 7.6
V max. (Vdc) 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 30 30 30
I max. (A) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
R max. initial (Ω) 0.078 0.072 0.072 0.042 0.042 0.026 0.026 0.020 0.016 0.014 0.014 0.012 0.0105 0.010 0.0065 0.005 0.160 0.160 0.160 0.090 0.090 0.090 0.090 0.060 0.031 0.024
Agency recognition UL UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA UL, TÜV, CSA
Dimensions (millimeters/inches) A B C (max.) (max.) (max.) 21.0 22.1 22.1 23.1 23.1 26.0 35.8 26.0 37.0 26.0 42.7 29.1 65.2 47.6 66.5 60.0 22.1 27.1 22.1 23.1 32.1 23.1 23.1 23.4 31.8 32.4
Fig.
(0.83) (0.87) (0.87) (0.91) (0.91) (1.02) (1.41) (1.02) (1.46) (1.02) (1.68) (1.15) (2.57) (1.874) (2.62) (2.36) (0.87) (1.07) (0.87) (0.91) (1.26) (0.91) (0.91) (0.92) (1.25) (1.28)
4.0 5.5 5.5 5.5 5.5 7.5 5.5 10.5 7.5 14.5 7.5 14.5 8.5 8.5 10.0 14.0 5.2 5.2 5.2 5.2 5.2 5.2 5.2 11.0 13.5 13.6
(0.16) (0.22) (0.22) (0.22) (0.22) (0.30) (0.22) (0.41) (0.30) (0.57) (0.30) (0.57) (0.33) (0.335) (0.39) (0.55) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.43) (0.53) (0.54)
0.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.3 1.3 1.3 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.1 1.1 1.1
(0.03) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.05) (0.05) (0.05) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04) (0.04)
18 16 17 16 17 16 16 16 16 16 16 16 17 16 17 16 19 19 20 19 19 20 21 19 19 19
† Please contact Raychem Circuit Protection for RoHS compliant version.
13
Definitions
IH = Hold current—maximum current at which the device will not trip under specified conditions at 20°C unless otherwise specified. Imax. = The highest fault current that can safely be used to trip a PolySwitch device under specified conditions. Vmax. = The highest voltage that can safely be dropped across a PolySwitch device continuously in its tripped state under specified fault conditions. R1max. = Maximum device resistance under specified conditions measured 1 hour post trip or post reflow. Ramax. = Maximum device resistance under automotive conditions specified in PS400 measured 1 hour after stress has been removed. Rmax. Initial = Maximum device resistance under specified conditions as supplied. IT = Minimum current at which a device will trip under specified conditions.
Voltage Rating for Telecom Devices
For Raychem Circuit Protection telecom devices (TC, TGC, TRx, TSx) there are two applicable voltage ratings. These are Vmax. Operating and Vmax. Interrupt. To help understand the nature of these two different voltage ratings the following definitions are provided: Vmax. Interrupt: Under specified conditions this is the highest voltage that can be applied to the device at the maximum current. Devices have been designed to trip safely under higher power level cross conditions, as listed above, to assist equipment in meeting the appropriate industry conditions. Vmax. Operating: For telecom devices this is the voltage we have used to obtain component recognition under UL1434. Most Raychem Circuit Protection devices (TC, TGC, TRx, TSx) are certified at 60V but can withstand higher Vmax. TR600 and TS600 product families are certified at 250V but can withstand higher Vmax. Interrupt conditions as noted above. For the purposes of this brochure we have included in the table of electrical ratings the more applicable Vmax. Interrupt value.
Agency approvals for PolySwitch devices:
PolySwitch devices, where appropriate, have been tested and have gained the following safety agency approvals: • UL Component Recognition in Category XGPU2, Thermistor Type Devices • CSA Component Acceptance Class 9073 32, Thermistors—PTC Type ¨ • TUV Rheinland Certification, PTC Resistors
®
®
WARNING!
• Operation beyond maximum ratings or improper use may result in device damage and possible electrical arcing and flame. • These devices are intended for protection against occasional overcurrent or overtemperature fault conditions, and should not be used when repeated fault conditions are anticipated. • TR and TS devices are not intended for continuous utility line voltage such as 120/220V or 240V. • LVR Product Notes: 1. A PTC device is not a fuse—it is a nonlinear thermistor that limits current. Because under a fault condition all PTC devices go into a high resistance state but not open circuit, hazardous voltage may be present at PTC locations. 2. The devices are intended for protection against occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions or prolonged trip events are anticipated. 3. Please refer to the SCD for complete information and applications limitations, which can be obtained from product management (650-361-6900) or the web: www.circuitprotection.com/lvr/ Standard PolySwitch product families include, RGEF, RHEF, RTEF, RUEF, RXEF, LVR, SMDF, nanoSMDF, microSMDF, miniSMDF, BBRF, LR4F, LTPF, SRPF, VTPF, VLRF, VLPF, AHRF, AGRF, and AHS. PolySwitch TS, TR and ASMD product families offer a selected number of RoHS compliant parts. In addition, special devices, such as speaker devices (SPK), terminal devices (TD) and custom chip devices, can be manufactured to meet performance requirements that could be outside of the performance band of the standard products listed in this short form catalog. Please contact a Raychem Circuit Protection Customer Service representative to discuss your special product needs.
14
Worldwide Headquarters
308 Constitution Drive, MS R21/2A Menlo Park, CA USA 94025-1164 Tel (800) 227-7040 (650) 361-6900 Fax (650) 361-2508
www.circuitprotection.com www.circuitprotection.com.hk (Chinese) www.raychem.co.jp/polyswitch (Japanese)
South America
Argentina Tel 54-11-4394-5150 Fax 54-11-4326-9985 Brazil Tel 55-11-5181-4788 Fax 55-11-5181-4790 Chile Tel 56-2-209-8211 Fax 56-2-223-1477 Colombia Tel 57-1-218-2460 Fax 57-1-218-2472 Peru Tel 51-1-221-4165 Fax 51-1-421-0368 Uruguay Tel 59-8-982-2428 Fax 59-8-982-2430 Venezuela Tel 58-2-242-6475 Fax 58-2-241-8260
Europe
UK/EIRE/ Nordic Countries Tel (32) 16-352028 Fax (32) 16-351319 Germany/Austria/ Switzerland/ Eastern Europe Tel (49) 89-6089386 Fax (49) 89-6089394 France/Benelux/ Italy/Iberia Tel (33) 1-34202114 Fax (33) 1-34202324 Other Countries Tel (32) 16-351321 Fax (32) 16-351319
Asia/Pacific
China, Beijing Tel 86-10-6581-5606 Fax 86-10-6581-5608 China, Guangzhou Tel 86-20-8330-9933 Fax 86-20-8385-6139 China, Hong Kong Tel 852-2738-3401 Fax 852-2735-1185 China, Shanghai Tel 86-21-6485-3288 Fax 86-21-6485-5109 China, Shenzhen Tel 86755-25154797 Fax 86755-25980419 India, Bangalore Tel 91-80-51121776 Fax 91-80-25586039 Japan Tel 81-44-900-5110 Fax 81-44-900-5140 Korea Tel 82-2-3415-4654 Fax 82-2-3486-1786 Malaysia Tel 6-04-611-2119 Fax 6-04-644-9521 Australia/Philippines Tel 63-2-848-0171 Fax 63-2-867-8661 Singapore Tel 65-6416-4205 Fax 65-6484-0661 Taiwan Tel 886-2-2662-9788 Fax 886-2-2662-4684 Thailand Tel 66-1-875-5758 Fax 66-2-617-1939
©2005 Tyco Electronics Corporation. Printed in USA. RCP0014.0505.5000
PolySwitch, SiBar, miniSMD, microSMD, and nanoSMD are trademarks of Tyco Electronics Corporation. All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics’ only obligations are those in the Company’s Standard Terms and Conditions of Sale for this product, and in no case will Tyco Electronics be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make changes—without notification to Buyer—to materials or processing that do not affect compliance with any applicable specification.
工商网监
湘ICP备2023018690号
