CDEUW_11

Corcom Facility EMI Filters Product Guide CDEUW Series (Capacitive Input) Catalog: 1654986 Issue Date: 06.2011 CDEUW Series Filter Cabinet • Modified NEMA I, constructed of not less than #14 gauge CRS with galvanized bulkhead • Blue epoxy finish to all non-conductive surfaces • R.F. Radiation of the shielded (load) compartment greater than 100 dB from 14 kHz to 10 GHz • Front cover access, dual cover design • Filter inserts pre-wired to standoffs and lugs • Lifting hooks and mounting tabs • Legs for floor mount available (see page 24) 60 Hz Models Only Individual Filters • Sealed components with welded and/or soldered seams • Constructed of not less than #16 gauge steel with corrosion resistant plating • Bleeder resistor to eliminate shock hazard provided • Surge arrestors provided upon request‡ Electrical Characteristics Voltage Drop: Less than 1% @ unity power factor Overload: 140% of rated current for 15 minutes Harmonic Distortion: Less than 2% @ full rated current Dielectric Withstanding Voltage: Per MIL-PRF-15733 and UL1283 D.C. Insulation Resistance: Per MIL-STD-202, Method 302 Terminal Strength: Per MIL-STD-202, Method 211, Condition E Temperature Rise: Per MIL-PRF-15733 and UL1283 Shown with optional legs Center mounting bracket not installed on all sizes R.F. Radiation: 100 dB minimum shielding effectiveness How to Order: CDEUW 4 00225 A6 -S -L Legs Surge Arrestors (optional) Voltage/Frequency A6 - 120/208V, 60Hz B6 - 277/480V, 60Hz A4 - 120/208V, 400Hz 1 Insertion Loss: 100 dB from 14 kHz - 10 GHz per MIL-STD-220A, under standard load condition Applicable Publications: MIL-PRF-15733 — Filters, radio interference MIL-STD-202 — Test methods for Components MIL-STD-220A — Test method of Insertion Loss MIL-STD-285 — Test method for Shielding Effectiveness NFPA 70-1987 — National Electric Code 486A - 1983 — Wire Connectors and Lug UL1283 — UL standard for EMI Filters Note 1: Current Rating 2 # of Filtered Phases Series Examples: CDEUW400225A6-S-L = 4, 225A CDEUW, 120/280V filters in cabinet with surge arrestors and legs CDEUW300030B6 = 3, 30A CDEUW, 277/480V filters in cabinet Surge Arrestor for A6/A4* Models: V251BA60 Surge Arrestor for B6 Models: V481BA60 Current configuration listed as 5 digits with leading zeros Note 2: ‡ Not intended for HEMP applications. Refer to the CDEUL(225A) page 14 for HEMP applications.. 8 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: Corcom Prods: 1-800-468-2023 1-847-680-7400 te.com corcom.com Corcom Facility EMI Filters Product Guide CDEUW Series (Capacitive Input) (continued) Mounting Brackets E A C Catalog: 1654986 Issue Date: 06.2011 Removable Cover RF Gasket 2 Removable Individual Phase Filters Corcom Facility EMI Filters — NEMA Cabinet Style Center mounting bracket not installed on all sizes D B Removable Cover Area for Conduit Penetration For optional legs, refer to page 24 Recommended torque for fasteners on removable cover: 25 in. lb. ± 3 in. lb. # Filtered phases @ rated current 2 @ 10A 3 @ 10A 4 @ 10A 2 @ 30A 3 @ 30A 4 @ 30A 2 @ 60 or 100A 3 @ 60 or 100A 4 @ 60 or 100A Dimensions A B C D 14.0 30.0 6.0 22.0 355.6 762.0 152.4 558.8 20.0 30.0 6.0 22.0 508.0 762.0 152.4 558.8 26.0 30.0 6.0 22.0 660.4 762.0 152.4 558.8 16.0 38.0 8.0 26.0 406.4 965.2 203.2 660.4 23.0 38.0 8.0 26.0 584.2 965.2 203.2 660.4 30.0 38.0 8.0 26.0 762.0 965.2 203.2 660.4 16.0 44.0 10.0 32.0 406.4 1117.6 254.0 812.8 23.0 44.0 10.0 32.0 584.2 1117.6 254.0 812.8 30.0 44.0 10.0 32.0 762.0 1117.6 254.0 812.8 Weight E ( Pounds/KG) 16.0 95 406.4 43.1 22.0 100 558.8 45.4 28.0 1 20 711.2 54.4 18.0 170 457.2 77.1 25.0 240 635.0 108.9 32.0 300 812.8 136.1 18.0 240 457.2 108.9 25.0 310 635.0 140.6 32.0 400 812.8 181.4 # Filtered phases @ rated current A 16.0 2 @ 150A 406.4 23.0 3 @ 150A 584.2 30.0 4 @ 150A 762.0 16.0 2 @ 225A 406.4 23.0 3 @ 225A 584.2 30.0 4 @ 225A 762.0 Dimensions B C D 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.5 1066.8 Weight E (Pounds/KG) 18.0 320 457.2 145.1 25.0 430 635.0 195.0 32.0 65 0 812.8 294.8 18.0 380 457.2 172.4 25.0 520 635.0 235.9 32.0 700 812.8 317.5 Max. Operating Voltage A6: 120/208V, 60 Hz B6: 277/480V, 60 Hz A4*: 120/208V, 400 Hz *400Hz filters available upon request. Will require external power factor correction coil. Please contact TE Connectivity Application Engineering 847-573-6517. Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: Corcom Prods: 1-800-468-2023 1-847-680-7400 9 te.com corcom.com