CDSUA

Corcom Facility EMI Filters Product Guide CDSUA Series Catalog: 1654986 Issue Date: 02.2010 Revision 02.2010 CDSUA Series Features • All four current ratings utilize a single housing (single-wire 30, 60, 100A and two-wire 30A) • Sealed using 18 AWG steel suitably plated housing • Removable input cover provides quick access to terminals • Three knockouts on the input side • Discharge bleeder resistor provided to reduce shock hazard • Surge protector provided upon request Electrical Characteristics Voltage Drop: Less than 1% @ unity power factor Overload: 140% of rated current for 15 minutes Harmonic Distortion: Less than 2% @ full rated current Dielectric Withstanding Voltage: Per MIL-PRF-15733 and UL1283 D.C. Insulation Resistance: Per MIL-STD-202, Method 302 Terminal Strength: Per MIL-STD-202, Method 211, Condition E Current Rating: Singe-wire 30, 60 and 100A, two-wire 30A R.F. Radiation: 100 dB minimum shielding effectiveness Insertion Loss: 100 dB from 100 kHz - 10 GHz per MIL-STD-220A Operating Frequency: 50/60Hz Operating Voltage: Line to Ground: Line to Line: 277 VAC (max) 480 VAC (max) How to Order: CDSUA 2 030 - C - S Surge Arrestors (optional) Conduit Fitting (supplied) Current Rating # of Filters Series Examples: CDSUA1030-C, CDSUA2030-C-S 20 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: Corcom Prods: 1-800-468-2023 1-847-680-7400 www.tycoelectronics.com www.corcom.com Corcom Facility EMI Filters Product Guide CDSUA Series (continued) 23.0 564.2 Catalog: 1654986 Issue Date: 02.2010 Revision 02.2010 .437 x .812 11.1 x 20.6 (2) 6.0 8.0 203.2 152.4 Label Knockouts for 0.75 (19.05) & 1.0 (25.4) Conduit 3 Places 5.0 127.0 2.5 63.5 2 Corcom Facility EMI Filters — Stand-Alone Filters 6.0 152.4 2.0 50.8 36.0 ± 1.0 914.4 ± 25.4 Ground Stud & Lug 1.0 (25.4) NPT Supplied with RF Gasket, Flange Nut and Insulating Bushing Insulated wire Type THHN Part Nos. CDSUA1030-C CDSUA1060-C CDSUA1100-C CDSUA2030-C Current (Amps) 30 60 100 2 x 30 Wire Gauge (AWG) 6 6 1 6 # of Wires 1 1 1 2 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: Corcom Prods: 1-800-468-2023 1-847-680-7400 21 www.tycoelectronics.com www.corcom.com