D-200-0236

CUSTOMER DRAWING SOLDERSHIELD SPLICE SLEEVE CRIMP SPLICE SEALING SLEEVE Part Names D-200-0228 D-200-0229 D-200-0230 D-200-0231 D-200-0232 D-200-0233 D-200-0234 D-200-0236 D-200-0237 D-200-0238 D-200-0239 Primary No. 1 1 1 2 2 2 2 3/4 3/4 3/4 3/4 AWG Range 26-20 20-16 16-12 26-20 18-16 14 12 22-20 18-16 14-12 18-16 Color Code Red Blue Yellow Red Blue Yellow Yellow Red Blue Yellow Blue L Max 80.52 (3.170) 80.52 (3.170) 80.52 (3.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 105.92 (4.170) 108.00 (4.250) 108.00 (4.250) A2.54 (0.100) 50.30 (1.970) 50.30 (1.970) 50.30 (1.970) 74.93 (2.950) 74.93 (2.950) 74.93 (2.950) 74.93 (2.950) 74.93 (2.950) 74.93 (2.950) 74.93 (2.950) 74.93 (2.950) Product Dimensions ØD1 ØD2 4.29 (0.169) 5.50 (0.217) 6.50 (0.256) 5.50 (0.217) 6.50 (0.256) 7.50 (0.295) 10.50 (0.413) 6.50 (0.256) 7.50 (0.295) 10.50 (0.413) 10.50 (0.413) 3.00 (0.118) 4.00 (0.157) 5.00 (0.197) 4.00 (0.157) 5.00 (0.197) 6.00 (0.236) 9.04 (0.356) 5.00 (0.197) 6.00 (0.236) 9.04 (0.356) 9.04 (0.356) ØD3 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) 2.46 (0.097) 1.14 (0.045) 1.63 (0.064) 2.46 (0.097) 1.63 (0.064) ØD4 2.79 (0.110) 4.00 (0.157) 4.32 (0.170) 2.16 (0.085) 2.79 (0.110) 4.32 (0.170) 4.32 (0.170) 2.16 (0.085) 2.79 (0.110) 4.32 (0.170) 4.32 (0.170) MATERIALS 1. SOLDERSHIELD SPLICE SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer, containing two environment resistant sealing rings and a solder impregnated, flux-coated copper-wire braid. Transparent blue. SOLDER: TYPE Sn96 per ANSI J-STD-006. FLUX: TYPE ROM1 per ANSI J-STD-004. 2. CRIMP SPLICE (1, 2, OR 4 PER KIT): Nickel-plated copper alloy. 3. SEALING SPLICE SLEEVE (1, 2, OR 4 PER KIT): Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer, containing two environment resistant sealing rings. Transparent blue. APPLICATION 1. These kits are designed to make an environment-resistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and quad cables having nickel-plated conductors and insulations rated for 150C minimum. 2. Temperature rating: -55C to +200C. 3. For installation procedures refer to the applicable sections of Raychem Process Standard RCPS 150-05. TITLE: 300 Constitution Dr Menlo Park, CA 94025, U.S.A. 1 TO 1 SPLICES CRIMP, SOLDERSHIELD SPLICE KIT, SHIELDED CABLE 26 THRU 12 AWG, Ni PLATED, 1 TO 4 CONDUCTORS DOCUMENT NO.: Unless otherwise specified dimensions are in Raychem millimeters. Devices [Inches dimensions are shown in brackets] Tyco Electronics reserves the right to ANGLES: N/A TOLERANCES: amend this drawing at any time. Users 0.00 N/A should evaluate the suitability of the ROUGHNESS 0.0 N/A product for their application. IN MICRON 0 N/A PREPARED BY: CAGE CODE: ECO NUMBER: D -200-02XX REV: DATE: F SCALE: SIZE: June 21, 2010 SHEET: UNGUYEN 06090 ECO-10-014788 © 2009-2010 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. NTS A 1 of 1