ESMD-C1_1

E-Series Surface Mount Mixer 1 – 1000 MHz Features • • • • • LO Power +7 dBm Up to +1 dBm RF Low Profile Surface Mount Tape and reel packaging available ESMD-C1 V1 SM - 2 Package Description M/A-COM’s ESMD-C1 is a Low Cost, Broadband, high performance Mixer designed for use in high volume wireless applications. The device has been optimised by careful selection of the Schottky Diode and Balun Transformer for excellent performance. ESMD-C1 is available in an SM-2 surface mount package and reflows using standard soldering reflow profiles. Parts are packaged in tape & reel. Electrical Specifications: TA = 25°C, Z0 = 50Ω 1, LO = +7 dBm Parameter RF Frequency LO Frequency IF Frequency Conversion Loss Isolation Test Conditions — — — — LO to RF Frequency 1 - 1000 1 - 1000 DC - 1000 2 - 500 1 - 1000 1 - 10 10 - 500 500 - 1000 1 - 10 10 - 1000 1 - 1000 Units MHz MHz MHz dB dB dB dB dB dB dB dBm Min — — — — — 45 30 25 40 23 — Typ — — — 6.5 7.5 60 45 40 60 35 — Max — — — 7.5 9.5 — — — — — 1 Isolation Input 1 dB Compression LO to IF — Ordering Information Part Number ESMD-C1TR 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Package Tape and Reel (500 piece Reel) • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. E-Series Surface Mount Mixer 1 – 1000 MHz Pin Configuration Pin No. 1 2 3 4 5 6 ESMD-C1 V1 Absolute Maximum Ratings 1 Function RF LO IF Ground Ground Ground Parameter RF Power Peak IF Current Operating Temperature Storage Temperature Pin Temperature (10 seconds) Absolute Maximum 50 mW 40 mA -55°C to +100°C -55°C to +125°C +260°C 1. Operation of this device above any one of these parameters may cause permanent damage. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.