KILOVAC FM200 (“FLATMAN”) Series 1-, 2- or 3-pole Contactor With Contacts Rated 200 Amps, 480Vac (50/60 Hz. ) or 48Vdc
Product Facts
I Multi-pole configurations I Normally open, normally I I
I
I
closed and mixed contact arrangements Optional quick connect tabs for sensing Small, lightweight & costeffective – designed to be the smallest, lowest cost contactor in the industry with its current rating Standard models available with 12VDC, 24VDC and 115 VAC coils. Consult factory for 240VAC coil models. 1 Form A auxiliary contacts File E208033
For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055.
Product Specifications
Parameter Contact Arrangement Contact Form (per pole) Rated Operating Voltage Max. Contact Voltage (transient) Continuous (Carry) Current Power Switching Form X (0.7-1.0 PF) V V Units Value for FM200 Series 1, 2 or 3 poles Form X or Y (NO-DM or NC-DB) 480Vrms (L-L) or 48VDC 750Vrms or 60VDC Coil Operating Voltage (valid over temperature range) Coil Designator Nominal Voltage Voltage Range Hold Voltage Dropout Voltage Units V V V V A 12 (DC) 9.6-13.2 ≥0.5Vnom ≤0.1Vnom B 24 (DC) 19.2-26.4 ≥0.5Vnom ≤0.1Vnom C 115 (AC) 92-126.5 ≥0.5Vnom ≤0.1Vnom D 24 (DC) 19.2-26.4 ≥0.5Vnom ≤0.2Vnom
Arms or ADC 200/pole (Form X) 150/pole (Form Y) Cycles 2,000 @ 300Arms 10,000@ 200Arms 20,000 @ 100Arms 5,000 @ 200A/48VDC 2 million @ 50A/28VDC 2,000 @ 225Arms 10,000@ 150Arms 20,000 @ 75Arms 5,000 @ 150A/48VDC 2 million @ 35A/28VDC >2 million 75 for Form X or Form Y 1 Form A (SPST-NO) Arms or ADC 1 @ 30VDC, 3 @ 125VAC Vrms Megohms G G °C °C %RH 2,200 @ sea level 100 10 5 -20 to +60 -40 to +85 0 to 95
Coil Resistance Data for Pole Configurations (@25°C) Coil Designator Resistance ±10% Units Ohms A X = 36 XX = 18 XXX = 12 XY = 13.2 XYX = 9.6 B* X = 36 XX = 18 XXX = 12 XY = 13.2 XYX = 9.6 C* X = 36 XX = 18 XXX = 12 XY = 13.2 XYX = 9.6 D* Y = 20.8 YY = 10.4 YYY = 6.9 YXY = 8.1
Power Switching Form Y (0.7-1.0 PF)
Cycles
*Coil resistance not measurable at terminals due to converter/economizer circuit. Coil Current/Power Data for Pole Configurations (@25°C, Vcoil=1.1Vnom) Coil Designator Current/Power A X = 0.37 ADC / 4.84W XX = 0.73ADC / 9.68W XXX = 1.1ADC / 14.5W XY = 1.0ADC / 13.2W XYX = 1.38ADC / 18.2W C D*** B** X = 0.33ADC / 3.9W XX = 0.65ADC / 7.6W XXX = 0.97ADC / 11.3W XY = 0.98ADC / 12.7W XYX = 1.31ADC / 16.5W Pick-Up I / Duration 1.28ADC / 75ms 2.4ADC / 75ms 3.0ADC / 75ms 3.0ADC / 75ms
Mechanical Life Contact Voltage Drop Auxiliary Contact Arrangement Auxiliary Contact Rating Dielectric Withstanding Voltage Insulation Resistance @ 500VDC Shock, 11ms 1/2 sine, peak Vibration, sine, 10-2000Hz. Operating Temperature Storage Temperature Ambient Humidity
Cycles mV
Coil Designator Current/Power
Weight oz. / kg 17.6 - 49.4 / 0.5 -1.4 See Outline Dimensions for model-specific weight information. Available Pole Configurations and Applicable Coil Codes No. of NC Poles (across) No. of NO Poles (down) 0 1 2 3 X Coil A/B/C/E XX Coil A/B/C/E XXX Coil A/B/C/E 0 1 Y Coil D XY Coil A/B/C/E XYX Coil A/B/C/E 2 YY Coil D YXY Coil D 3 YYY Coil D
X = 0.067 Arms / 6.8VA Y = 0.13ADC / 3.4W XX = 0.115Arms / 11.6VA YY = 0.23ADC / 6.1W XXX = 0.146Arms / 14.8VA YYY = 0.34ADC / 9.0W XY = 0.074Arms / 7.5VA YXY = 0.28ADC / 7.4W XYX = 0.161Arms / 16.3VA ***Economized.
**Average coil current.
Operate/Release Time (25°C, 0.8Vnom ≤ V < Vnom) Typ. Coil Designator Operate Time Release Time Bounce Time Units ms ms ms A 25-50 10-20 2-5 B**** 30-50 70-80 2-5 C**** 50-150 75-100 2-5 D**** 20-30 75-100 2-5
****Includes internal coil suppression.
© 2003 and 2007 by Tyco Electronics Corporation. All Rights Reserved. FLATMAN, KILOVAC and TE Logo and Tyco Electronics are trademarks.
X = Form X (NO-DM) Y = Form Y (NC-DB) Catalog 1654769 Issued 11-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
1
Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
200 Amp, 480Vac or 48Vdc Contactor with 1, 2 or Poles
KILOVAC FM200 Series (FLATMAN)
Part Numbering System
Typical Part Number
Series: FM200 = Multipole, 200 Amp, 480VAC/48VDC Contactor Control Voltage: A = 12VDC Coil, No Suppression B = 24VDC Converter, with Suppression C = 115VAC Converter, with Suppression D = 24VDC Electronic Chopper, with Suppression E = 240VAC Converter, with Suppression - Consult Factory for Availability and Specifications Optional Termination: A = Optional Quick Connect Tabs B = No Optional Terminals
(Continued)
FM200
A
B
XYX
Pole Configuration (All models have a 1 Form A (SPST-NO) auxiliary switch): X = 1 Form X (SPST-NO-DM), Available with control voltage codes A, B, C and E XX = 2 Form X (2PST-NO-DM), Available with control voltage codes A, B, C and E XXX = 3 Form X (3PST-NO-DM), Available with control voltage codes A, B, C and E Y = 1 Form Y (SPST-NC-DB), Available only with control voltage code D YY = 2 Form Y (DPST-NC-DB), Available only with control voltage code D YYY = 3 Form Y (3PST-NC-DB), Available only with control voltage code D XY = 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB), Available with control voltage codes A, B, C and E XYX = 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB) + 1 Form X (SPST-NO-DM), Available with control voltage codes A, B, C and E YXY = 1 Form Y (SPST-NC-DB) + 1 Form X (SPST-NO-DM) + 1 Form Y (SPST-NC-DB), Available only with control voltage code D
Outline Dimensions
2.29 (58.2) 1.86 (47.2) .40 (10.2) C
OPTIONAL TAB TERMINALS .250 x .032 (6.35 x .813)
3.77 (95.8) 2.29 (58.2) 1.93 (49.0)
MAIN TERMINAL WIRE CONNECT VIA M8 BOLT W/LOCK/FLAT 13MM (0.5 IN) HEX HEAD
1.22 (31.0)
4.2 (106.7)
A
DIM. A B C WEIGHT
NUMBER OF POLES 1 1.68 (42.7) 2.14 (54.3) 1.56 (39.6) 17.6 oz. (0.5 kg) 2 2.67 (67.7) 3.12 (79.3) 2.55 (64.6) 35.3 oz. (1.0 kg) 3 3.65 (92.7) 4.11 (104.4) 3.53 (89.7) 49.4 oz. (1.4 kg) B
RIGHT ANGLE SCREW TERMINAL STRIP ACCEPTS #24 - #14 WIRE
3.42 (86.9) 3.77 (95.8)
2.74 (69.6)
2.98 (75.7)
.256 DIA. (6.5)
1654769 – 0M – KRG – PDF – 11-07 Printed in U.S.A.
For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
2
www.tycoelectronics.com
