KUHP-5DT1-48

Catalog 1308242 Issued 3-03 P&B KUHP series 30 Amp Power Relays File E22575 File LR15734-123 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features • AC coils 6-277VAC 50/60 Hz., DC 6-110VDC. • Contact arrangement up to DPDT. • .250" combination push-on/solder terminals or PC terminals. • Side flange and top flange mounting. • Designed to meet VDE space requirements. • Class B coil insulation. Coil Data Nominal Voltage DC Coils 6 12 24 48 110 6 12 24 120 240 277 DC Resistance in Ohms ± 10%* 32.1 120 472 1,800 10,000 4.2 18 72 1,700 7 ,200 10,250 Must Operate Voltage 4.5 9.0 18.0 36.0 82.5 5.1 10.2 20.4 102.0 204.0 235.5 Nominal Coil Current (mA) 187 100 51 26.7 11 460 230 115 24 12 9 Contact Data @ 25°C Arrangements: 1 Form C (SPDT) and 2 Form C (DPDT). Material: Silver or silver-cadmium oxide. Expected Mechanical Life: 10 million operations. AC Coils Contact Ratings Contact Arrangement 1 Form C Single Pole Double Throw 2 Form C Double Pole Double Throw UL/CSA Ratings 30A 120/240VAC 1 HP @ 120VAC, 1 1/2 HP @ 240VAC 25A @ 28VDC 20A @ 120/240VAC 3/4 HP @ 120VAC 1 1/2 HP @ 240VAC 20A @ 28VDC 7A @ 120VAC (Tungsten)* Expected Life 100,000 ops. 100,000 ops. *±15% for AC coils. Operate Data @ 25°C Must Operate Voltage: DC Coils: 75% of nominal. AC Coils: 85% of nominal. Operate Time (Excluding Bounce): 20 milliseconds, typical, at nominal voltage. Release Time (Excluding Bounce): 20 milliseconds, typical, at nominal voltage. *NO contacts only. Initial Dielectric Strength Between Open Contacts: 1,200V rms. Between Adjacent Contacts: 3,750V rms. Between Contacts and Coil: 3,750V rms. Between Coil and Frame: 2,000V rms. Environmental Data Temperature Range: (Operating) DC Coils: -45°C to +70°C. AC Coils: -45°C to +45°C. Shock: 15g’s, 11 ms (non-operating). Vibration: .065" double amplitude, 10-55 Hz. Coil Data @ 25°C Voltage: 6-110VDC and 6-277VAC. Nominal Power: DC Coils: 1.2 Watts. AC Coils: 2.7VA. Duty Cycle: Continuous. Initial Insulation Resistance: 100 megohms, min. Insulation: Class B, 130°C. Mechanical Data Termination: .250" quick connect/solder; and PC board. Enclosure: Polycarbonate dust cover. Weight: 3.2 oz. (92g) approximately. Ordering Information Typical Part No. 1. Basic Series and Type: KUHP = Enclosed 20/30 amp relay. 2. Contact Arrangement and Rating: 5 = 1C (SPDT); 30 amps. 11 = 2C (DPDT); 20 amps. 3. Coil Input: A = AC, 50/60 Hz. D = DC 4. Mountings: 1 = PLAIN CASE 5 = BRACKET MOUNT CASE 5. Terminals and Contact Materials: 1 = .250" (6.35mm) quick connect/solder; silver-cadmium oxide. 6. Coil Voltage: AC coils to 277VAC, 50/60 Hz. DC coils to 110VDC. NOTE: No sockets are available for this relay. B KUHP- 11 A 5 1 -120 T = TOP FLANGE CASE 7 = .047" (1.19mm) printed circuit; silver-cadmium oxide. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. KUHP-5A51-24 KUHP-5A51-120 Dimensions are shown for reference purposes only. KUHP-5AT1-120 KUHP-5D51-12 KUHP-5D51-24 KUHP-5DT1-12 KUHP-5DT1-24 KUHP-11A51-24 KUHP-11A51-120 KUHP-11AT1-120 KUHP-11D51-12 KUHP-11D51-24 KUHP-11DT1-12 KUHP-11DT1-24 www.tycoelectronics.com Technical support: Refer to inside back cover. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. 803 Catalog 1308242 Issued 3-03 P&B Outline Dimensions Plain Case 1.406 (35.71) Top Flange Enclosure 1.393 MAX. (35.38) .138 TYP . (3.51) 3 6 9 1.531 MAX. (38.89) 1 4 7 1.968 MAX. (49.99) .178 TYP . (4.52) 2.461 MAX. (62.51) 1 4 Bracket Mount Case 1.406 MAX. (35.71) 7 Terminal Dimensions .250" (6.35mm) Quick Connect/Solder .035 (.89) .125 DIA. (3.18) HEADER .75 (19.05) A 1.875 ± .0 05 (47 ± .13) .63 1.496 ± .015 2.382 MAX. (38.05 ± .38) (60.50) B 2 5 3 6 9 B A 2 5 Printed Circuit .312 TYP . (7 .92) 2.90 MAX. (73.66) .375 (9.53) 1.968 MAX. (49.99) .07 (1.78) .305 (7 .75) .250 ± .0 03 (6.35 ± .08) .125 DIA. (3.18) HEADER .156 (3.96) .047 (1.19) .250 (6.35) 1.531 MAX. (38.89) .106 (2.69) .312 (7 .92) .358 REF . (9.09) THICKNESS .032 (0.81) .06 (1.52) .106 (2.69) .312 (7 .92) .343 REF . (8.71) THICKNESS .032 (0.81) .305 (7 .75) .078 R. TYP . (1.98) .625 TYP . (15.88) 2.500 (63.50) .437 (11.10) Wiring Diagrams 1 Form C 1 Form A (Delete 2) 1 Form B (Delete 5) 2 5 7 PC Board Layouts (Bottom Views) 2 Form C 2 Form A (Delete 1 & 3) 2 Form B (Delete 4 & 6) 1 4 7 3 6 9 .240 (6.10) .637 (16.18) .437 (11.1) .875 (22.23) .076 DIA. TYP . (1.93) .397 (10.08) .240 (6.10) 1 Pole Model .076 DIA. TYP . (1.93) .243 (6.17) 2 Pole Model .875 (22.23) .243 (6.17) A B A B Dimensions are shown for 804 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover.