LEV100A6ANH

Introducing KILOVAC LEV100 Series 900 Vdc Contactor with 1 form X contacts rated 100A continuous KILOVAC LEV100 Series 900 Vdc Contactor PART NUMBERING Typical Part Number LEV100 Series: LEV100 = 100A Contactor Contact Arrangement: A = 1 Form X (SPST-NO-DM) Coil Voltage: 4 = 12VDC Coil Wire Length: A = 15 inches [.4M] Coil Termination: N = None – Stripped Wires Mounting and Power Terminals: G = Bottom Mount (2 x #8); M5 x 10 NOTE: All part numbers are RoHS compliant. Specifications are subject to change without notice. A 4 A N G 5 = 24VDC 6 = 48VDC H = Side Mount (2 x #8); M5 x 10 PRODUCT OFFERING • Bottom Mount Models 3-1618389-7 9-1618389-8 3-1618391-7 • Side Mount Models 4-1618391-0 4-1618391-1 4-1618391-2 LEV100A4ANG LEV100A5ANG LEV100A6ANG 12Vdc coil 24Vdc coil 48Vdc coil 15”[.4m] leads 15”[.4m] leads 15”[.4m] leads LEV100A4ANH LEV100A5ANH LEV100A6ANH 12Vdc coil 24Vdc coil 48Vdc coil 15”[.4m] leads 15”[.4m] leads 15”[.4m] leads Tyco Electronics I LEV100 KILOVAC LEV100 Series 900 Vdc Contactor PERFORMANCE DATA Bottom Mount 1.82 [ 46.3 ] .70 [ 17.78 ] MOUNTING HARDWARE (NOT SUPPLIED): 2 X M4 BOLT, LOCKWASHER AND WASHER TORQUE: 20 IN-LBS MAX [2.3 NM MAX] 1.56 DIA. [ 39.5 ] M5 FEMALE LOAD TERMINALS - 2 PLACES HARDWARE (NOT SUPPLIED) 2 X M5 BOLT, LOCKWASHER AND WASHER TORQUE: 30 TO 40 IN-LBS [3.4 TO 4.5 NM] 2.28 [ 57.96 ] 2.07 [ 52.52 ] .30 [ 7.62 ] Side Mount 1.82 [ 46.32 ] .99 [ 25.04 ] 2.28 [ 57.96 ] 2.07 [ 52.52 ] MOUNTING HARDWARE (NOT SUPPLIED): 2 X M4 BOLT, LOCKWASHER AND WASHER TORQUE: 20 IN-LBS MAX [2.3 NM MAX] .70 [ 17.78 ] 1.56 DIA. [ 39.5 ] 1.61 [ 40.77 ] M5 FEMALE LOAD TERMINALS - 2 PLACES HARDWARE (NOT SUPPLIED) 2 X M5 BOLT, LOCKWASHER AND WASHER TORQUE: 30 TO 40 IN-LBS [3.4 TO 4.5 NM] .83 [ 21.02 ] .30 [ 7.62 ] LEV100 I Tyco Electronics KILOVAC LEV100 Series 900 Vdc Contactor KEY FEATURES Hermetically sealed — intrinsically safe. Operates in explosive/harsh environments without oxidation or contamination of contacts, including long periods of non-operation 8kV isolation between open contacts permits use for high voltage isolation and carry 12, 24 and 48 Vdc coils Designed and built in accordance to AIAG QS9000 DESCRIPTION Lowest cost, 900 Vdc 100 amp, hermetically sealed DC contactor in the industry Compact package available in side- or bottom-mount configurations, not position sensitive APPLICATIONS Power/motor control circuit isolation, circuit protection and safety in industrial machinery Automotive battery switching and backup MECHANICAL Compact epoxy-sealed resin enclosure occupies only about 4 in3 (65.5 cm3) Robust integral mounting plate on either bottom or side of enclosure accepts two M4 screws Inert gas filled contact chamber Flying leads for coil connections Load terminals threaded for M5 bolts (not included) LOAD LIFE VS. RESISTIVE POWER SWITCHING RoHS Ready Tyco Electronics I LEV100 KILOVAC LEV100 Series 900 Vdc Contactor PERFORMANCE DATA Physical Data Contact Arrangement: Main Contacts Dimensions Weight SPST-NO-DM (1 Form X) See drawings on page 4 6.7 oz (190g) Contact Data Contact Arrangement: Main Contacts SPST-NO-DM (1 Form X) Voltage Rating: Main Contacts Switching (max) 900VDC Current Rating: Main Contacts Switching Continuous (Note 1) 100A Short Term -- 3 Minutes (Note 2) 200A Hot Switching Performance (Polarity sensitive) 50A make/break @ +400Vdc 50,000 cycles 100A make/break @ +400Vdc 6,000 cycles 100A make/break @ -400Vdc 1,000 cycles 200A make/break @ +400Vdc 500 cycles 1,000A break only @ +400Vdc 25 cycles 600A make only 25 cycles Maximum Short Circuit Current (1/2 cycle, 60 Hz) 1,250A (through closed contacts) Dielectric Withstand Voltage (Note 3) Between Open Contacts 5,600Vrms/8,000Vdc Contacts to Coil 2,000Vrms/4,000Vdc Insulation Resistance, Terminal to Terminal / Terminals to Coil When New 100 megohms, min. @ 500Vdc At End of Life 50 megohms, min. @ 500Vdc Mechanical Life 1 million cycles Coil Operating Voltage (valid over temperature range) Nominal Voltage 12Vdc 24Vdc Maximum Voltage 16Vdc 28Vdc Pick Up Voltage (20°C) 8Vdc 16Vdc Drop Out Voltage (20°C) 1.2Vdc 2.4Vdc Coil Current (nominal at 20°C, 12vdc) 461mA 250mA Coil Power Nominal @ Vnom, +20°C 5.5W 6.0W Pickup (close) Voltage Max.@85˚C 9.6Vdc 19.2Vdc Coil Resistance Nominal @ +20°C ± 5% (ohms) 26 96 48Vdc 52Vdc 33Vdc 4.8Vdc 122mA 6.0W 38.4Vdc 392 Operate & Release Time Operate Time Max. Operate Bounce Max. Release Time 25ms 5ms 10ms Environmental Data Shock, 11ms 1/2 sine (operating) Sine Vibration, 20G peak Operating Temperature Range Noise Emission (at 100 mm distance) 20G peak 55-2,000 Hz. -40°C to +85°C 70dB(a) Notes Note 1: 8.4 mm2 conductor. Current rating depends upon conductor size. Keep terminals below 175°C max continuous. Note 2: 3 minutes at +40°C ambient with 8.4 mm2 (#8 AWG) conductor. Note 3: 2,000Vrms minimum under all conditions, until end of life. LEV100 I Tyco Electronics FOR MORE INFORMATION Technical Support Internet: E-mail: USA: Canada: Mexico: C. America: South America: Hong Kong: Japan: UK: www.tycoelectronics.com newproducts@tycoelectronics.com 1-800-522-6752 1-905-470-4425 1-800-733-8926 52-55-1106-0803 55-11-2103-6000 852-2735-1628 81-44-844-8013 44-208-420-8341 Tyco Electronics Corporation Harrisburg, PA relays.tycoelectronics.com/kilovac Copyright 2008 by Tyco Electronics Corporation 6-1773450-9 — 5M — A&D/CGX — 04-08 KILOVAC, TE Logo and Tyco Electronics are trademarks. Export of Tyco Electronics products may require licensing.