LR4-1300SSF

PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com PRODUCT: LR4-1300SSF Overcurrent Protection Device Raychem Circuit Protection Products DOCUMENT: SCD 25627 PCN: F65944 REV LETTER: D REV DATE: JUNE 16, 2007 PAGE NO.: 1 OF 1 Specification Status: Released Maximum Electrical Rating Operating Voltage: Interrupt Current: Chip Size : 9.5 X 50mm Leads: Nickel 1/2H 0.3mm nominal thickness Lead-free Polyester (White) 51.5 mm nominal width 20Vdc 100A Solder: Tape: Marking: (Color: Green) Manufacturer's Mark EX3 Part Identification Lot Identification ∗ Dimension values on the drawing are for reference only. TABLE I. DIMENSIONS: A B MIN MAX MIN MAX mm: 61.5 66.5 9.4 10.0 in*: (2.42) (2.62) (0.37) (0.39) *Rounded off approximation C MIN 0.9 (0.04) MAX 1.3 (0.05) MIN 5.0 (0.20) D MAX 7.5 (0.30) MIN 5.0 (0.20) E MAX 7.5 (0.30) MIN 5.9 (0.23) F MAX 6.1 (0.24) TABLE II. PERFORMANCE RATINGS: As measured in Mueller Kelvin Clips model BU-75K. I HOLD CURRENT TRIP LIMITS TIME TO TRIP REFERENCE RESISTANCE ONE-HOUR POST-TRIP RESISTANCE TRIPPEDSTATE POWER DISSIPATION WATTS AT 20°C, 20V MAX 4.5 AMPS 20°C HOLD 13.0 AMPS AT 0°C HOLD 14.5 AMPS AT 20°C AMPS AT 60°C AMPS AT 70°C TRIP HOLD TRIP HOLD TRIP HOLD TRIP 23.5 13.0 21.2 9.5 15.7 8.6 14.4 SECONDS OHMS OHMS AT 20°C, AT 20°C AT 20°C 65.0A MIN MAX MIN MAX MIN MAX --5 0.0035 0.0065 0.0035 0.0090 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: Materials Information: ROHS Compliant UL, TUV, CSA PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. ELV Compliant Pb-Free © 2005, 2007 Tyco Electronics Corporation. All rights reserved.