MASW-000822-12770T

RoHS Compliant HMICTM PIN Diode SP2T 8 Watt Switch for 0.05 – 6.0 GHz Higher Power Applications Features • • • • • • • • Exceptional Broadband Performance, 0.05 - 6.0 GHz Lower Loss: Tx = 0.35 dB, Rx = 0.55 dB @ 3.8 GHz, 20mA Higher Isolation: Rx-Tx = 21dB, Tx-Rx = 26dB @ 3.8 GHz Higher RF Input Power = 8 W C.W ( Tx-Ant Port ) Higher IIP3 = 65 dBm ( Tx-Ant Port ) Lower EVM (OFDM): < 1.0% @ 8W Pinc, ( Tx-Ant Port ) Suitable for Higher Power WiMAX & WiFi Applications Surface Mount 3mm MLP Package, RoHS Compliant MASW-000822-12770T Rev 1.0 Functional Diagram: Common Anode Series PIN Diode Switch Ant Tx Rx Description and Applications The MA-COM MASW-000822-12770T is a SP2T Broadband, high linearity, common anode, PIN diode T/R switch for 0.05 - 6.0 GHz applications, including WiMAX & WiFi. The device is provided in industry standard 3mm MLP plastic packaging. This device incorporates a PIN diode die fabricated with M/A-COM’s patented Silicon-Glass HMICTM process. This chip features two silicon pedestals embedded in a low loss, low dispersion glass. The diodes are formed on the top of each pedestal. The topside is fully encapsulated with silicon nitride and has an additional polymer passivation layer. These polymer protective coatings prevent damage and contamination during handling and assembly. This compact 3mm MLP package, SP2T switch offers wideband 0.05 - 6.0 GHz performance with excellent isolation to loss ratio for both Tx and Rx states. The PIN diode provides exceptional 8 W C.W. power handling coupled with 65 dBm IIP3 for maximum switch performance. 3mm MLP Outline: OD-S 1277 Circuit Side View PIN 1 PIN 16 PIN Configuration: (Center Metal Area is RF, D.C., and Thermal Ground) PIN 1 2 3 4 5 Function N/C N/C Tx N/C N/C N/C N/C N/C PIN 9 10 11 12 13 14 15 16 Function N/C Rx N/C N/C N/C Ant N/C N/C Absolute Maximum Ratings1 @ TA = +25 °C (unless otherwise specified) Parameter Forward Current Reverse Voltage (RF & D.C.) Operating Temperature Storage Temperature Junction Temperature Tx Incident C.W. Power Tx Peak Incident Power Mounting Temperature Absolute Maximum l 100 mA l l -100 V l -40 °C to +85 °C -55 °C to +150 °C +175 °C 8 W C.W. 20 W, 3 uS P.W., 1% Duty +235 °C for 10 seconds 6 7 8 Ordering Information Part Number MASW-000822-12770T Package Tape and Reel 1. Exceeding these limits may cause permanent damage. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant HMICTM PIN Diode SP2T 8 Watt Switch for 0.05 – 6.0 GHz Higher Power Applications MASW-000822-12770T Rev 1.0 Electrical Specifications @ +25 °C, Characteristic Impedance, Zo = 50 Ω Parameter F = 2.3-2.7 GHz Insertion Loss, Rx Insertion Loss, Tx Isolation, Tx To Rx Isolation, Rx To Tx Tx Input Return Loss Rx IL Tx IL Rx ISO Tx ISO Tx RL Rx RL Rx = +5.0 V@ +22mA, Tx =+12V @ 0mA, Pinc= 0 dBm Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA, Pinc= 0 dBm Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA, Pinc= 0 dBm Rx = +5.0 V@ +22mA, Tx =+12V @ 0mA, Pinc= 0 dBm Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA, Pinc= 0 dBm Rx = +5.0 V@ +22mA, Tx =+12V @ 0mA, Pinc= 0 dBm dB dB dB dB 27.0 22.5 0.52 0.35 29.5 24.5 0.70 0.45 Symbol Conditions Units Min Typ Max dB 17 Rx Input Return Loss dB 17 F = 3.3-3.8 GHz Insertion Loss, Rx Insertion Loss, Tx Isolation, Tx To Rx Isolation, Rx To Tx Tx Input Return Loss Rx IL Tx IL Rx ISO Tx ISO Tx RL Rx RL Rx = +5.0 V@ +22mA, Tx =+12V @ 0mA, Pinc= 0 dBm Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA, Pinc= 0 dBm Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA, Pinc= 0 dBm Rx = +5.0 V@ +22mA, Tx =+12V @ 0mA, Pinc= 0 dBm Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA, Pinc= 0 dBm Rx = +5.0 V@ +22mA, Tx =+12V @ 0mA, Pinc= 0 dBm dB dB dB dB 24.5 19.5 0.55 0.35 26.5 21.5 0.75 0.55 dB 18 Input Return Loss F = 4.9-5.9 GHz Insertion Loss, Rx Insertion Loss, Tx Isolation, Tx To Rx Isolation, Rx To Tx Tx Input Return Loss dB 18 Rx IL Tx IL Rx ISO Tx ISO Tx RL Rx RL Rx = +5.0 V@ +22mA, Tx =+12V @ 0mA, Pinc= 0 dBm Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA, Pinc= 0 dBm Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA, Pinc= 0 dBm Rx = +5.0 V@ +22mA, Tx =+12V @ 0mA, Pinc= 0 dBm Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA, Pinc= 0 dBm Rx = +5.0 V@ +22mA, Tx =+12V @ 0mA, Pinc= 0 dBm dB dB dB dB 23.0 17.5 0.65 0.4 25.5 20.0 1.00 0.85 dB 18 Rx Input Return Loss dB 18 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant HMICTM PIN Diode SP2T 8 Watt Switch for 0.05 – 6.0 GHz Higher Power Applications MASW-000822-12770T Rev 1.0 Electrical Specifications @ +25 °C, Characteristic Impedance, Zo = 50 Ω Parameter Symbol Conditions 3.5 GHz, Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA Tx To Antenna 3.5 GHz, Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA Tx To Antenna 3.5 GHz, Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA Pin = + 30 dBm 3.5 GHz, Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA Pin = + 30 dBm Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA Pi= +10dBm, F1 = 3.500 GHz, F2 = 3.510 GHz Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA F = 3.5 GHz Rx = +5.0 V@ +22mA, Tx =+12V @ 0mA F = 3.5 GHz ( 10-90% RF Voltage) Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA 1MHz Rep Rate in Modulating Mode Tx = +5.0 V@ +22mA, Rx =+12V @ 0mA Pinc = +39 dBm Units Min Typ Max Tx Input P0.2dB Tx IP0.2dB Tx IP1dB Tx 2Fo Tx 3Fo Tx IIP3 Tx Pinc Rx Pinc dBm 36 Tx Input P1dB dBm 40 Tx 2nd Harmonic dBc 68 Tx 3rd Harmonic Tx Input Third Order Intercept Point dBc 84 dBm 65 Tx C.W. Input Power dBm 39 Rx C.W. Input Power dBm 30 Tx RF Switching Speed τRF us 1 Tx EVM (OFDM) EVM % 0.8 Notes: 1. Data is taken on M/A-COM evaluation board 1000029181-0000001 @ 25C by removing peripheral board losses ( connectors, transmission line, and bias elements ). 2. Typical PIN Diode Forward Voltage = + 0.9 V @ + 22 mA for Insertion Loss. Typical PIN Diode Reverse Voltage = 12 V – 0.9 V = 11.1 V for Isolation ( See Bias Schematic Page 9 ). 3. Switch is Asymmetrical, + 39 dBm RF Input Power Applies to Tx Port Only. 4. Center Ground Area of MLP 3mm Package must be Attached to Thermal Ground for Optimum RF Power Performance. Assembly Note: A typical profile for a Sn 60/ Pb 40 Soldering process is provided in Application Note, “ M538 ” , “ Surface Mounting Instructions “ on the MA-COM website www.macom.com 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant HMICTM PIN Diode SP2T 8 Watt Switch for 0.05 – 6.0 GHz Higher Power Applications MASW-000822-12770T Rev 1.0 MASW-000822-12770T Typical Performance Curves @ +25°C: Tx & Rx Insertion Loss Bias Conditions: 10 mA and 20 mA for Low Loss , 11 V Back Bias for Isolation TX_Ins_10 TX_Ins_20 RX_Ins_10 RX_Ins_20 0.0 -0.1 -0.2 -0.3 Insertion Loss (dB) -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 2.3-2.7 GHz 3.3-3.8 GHz 4.9-5.9 GHz -1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency (GHz) 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant HMICTM PIN Diode SP2T 8 Watt Switch for 0.05 – 6.0 GHz Higher Power Applications MASW-000822-12770T Rev 1.0 MAASW-000822-12770T Typical Performance Curves @ +25°C: Tx & Rx Isolation 20 mA for Loss, 11 V Back Bias for Isolation MASW-000822-12770T, Tx & Rx Isolation, 25C TX_Iso_20 RX_Iso_20 -15 -20 -25 -30 Isolation (dB) -35 -40 -45 -50 -55 -60 2.3-2.7 GHz 3.3-3.8 GHz 4.9-5.9 GHz -65 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency (GHz) 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant HMICTM PIN Diode SP2T 8 Watt Switch for 0.05 – 6.0 GHz Higher Power Applications MASW-000822-12770T Rev 1.0 MASW-000822-12770T Typical Performance Curves @ +25°C : Tx Return Loss 20 mA for Loss, 11 V Back Bias for Isolation MASW-000822-12770T, TX Return Loss ( S11 ), + 25C TX_RL_B5 0 -5 -10 -15 Return Loss (dB) -20 -25 -30 -35 -40 -45 2.3-2.7 GHz 3.3-3.8 GHz 4.9-5.9 GHz -50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency (GHz) 6 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant HMICTM PIN Diode SP2T 8 Watt Switch for 0.05 – 6.0 GHz Higher Power Applications MASW-000822-12770T Rev 1.0 MASW-000822-12770T Typical Performance Curves @ +25°C : Rx Return Loss 20 mA for Loss, 11 V Back Bias for Isolation MASW-000822-12770T, RX Return Loss ( S11 ), +25C RX_RL_B5 0 -5 -10 -15 Return Loss (dB) -20 -25 -30 -35 -40 -45 2.3-2.7 GHz 3.3-3.8 GHz 4.9-5.9 GHz -50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency (GHz) 7 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant HMICTM PIN Diode SP2T 8 Watt Switch for 0.05 – 6.0 GHz Higher Power Applications MASW-000822-12770T Rev 1.0 MASW-000822-12770T Outline – 3mm FQFP-N 16 Lead Saw Singulated Ant = PIN 14 14 TOPVIEW 10 Tx = PIN 3 Rx = PIN 10 GND CIRCUIT VIEW 8 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant HMICTM PIN Diode SP2T 8 Watt Switch for 0.05 – 6.0 GHz Higher Power Applications Driver and SP2T Schematic with Positive Voltage MASW-000822-12770T Rev 1.0 180 Ω SP2T Zetex Dual, n-Channel 20 V MOSFET P/N ZXMN2AM832 Unused TTL Gates TI Quad, 2 Input TTL XOR Gate P/N SNJ54ACT86FK Notes: 1. 2. 3. 4. 5. Forward Bias Diode Voltage, ∆Vf @ 22 mA = + 0.9 V. Reverse Bias Diode = | - ( +12 V - +0.9 V ) | = | - 11.1 | V. Nominal Zetex ZXMN2AM832 MOSFET Low Output Voltage, Vds ~ + 0 V @ 22 mA. The ZXMN2AM832 may be operated with +5V with a small reduction in RF Isolation. Un-used Texas Instruments SN54ACT86 XOR TTL Inputs are grounded. D.C. Bias to RF Truth Table RF State Low Loss Tx-Ant & Isolation Tx-Rx Low Loss Ant-Rx & Isolation Rx-Tx TTL & D.C. Bias Conditions TTL = 1 + 5V @ 22 mA ( Tx ), + 12V @ 0 mA ( Rx ) TTL = 0 + 5V @ 22 mA ( Rx ), + 12V @ 0 mA ( Tx ) Voltage at Common Anode + 0.9 V + 0.9 V 9 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant HMICTM PIN Diode SP2T 8 Watt Switch for 0.05 – 6.0 GHz Higher Power Applications Driver and SP2T Schematic with Positive and Negative Voltage MASW-000822-12770T Rev 1.0 D.C. Bias to RF Truth Table Voltage at Common Anode RF State Low Loss Tx-Ant & Isolation Tx-Rx Low Loss Ant-Rx & Isolation Rx-Tx TTL & D.C. Bias Conditions TTL = 1 -12V @ -50mA ( Tx ), + 5V @ 0 mA ( Rx ) TTL = 0 -12V @ -50mA ( Rx ), + 5V @ 0 mA ( Tx ) Rbias = 120Ω - I bias = - 50 mA - 6.0 V - 6.0 V Notes for TTL Compatible Driver Functionality using +Vcc and –Vee. 1. The Mode Control defines the Type of TTL Logic. Grounding the Mode Control produces Inverting Logic: TTL 0 ( Input ) = +V , + I ( Output ), and TTL 1 ( Input ) = -V, -I ( Output ). Consequently Connecting the Mode Control to +5V , produces Non- Inverting Logic: TTL 0 ( Input ) = -V , - I ( Output ), and TTL 1 ( Input ) = +V, +I ( Output ). 2. Open circuit output voltage ~ ( +Vcc-0.8V ) or( –Vee + 0.8V ). Diode Forward Voltage , ∆Vd @ 50 mA ~ 1.0 V. 3. Rbias is used to build reverse D.C.voltage for the isolated , “ OFF “ , Series diode to Improve RF Linearity under High RF Signal. Available Negative Bias Current = ( -Vee + ∆Vbe + ∆Vce + ∆Vd) / ( 75Ω + Rbias ) = ( -Vee + 0.3 V + 0.7+ 1.0 V ) / ( 75Ω + Rbias ). As example, using –Vee = -12V for -50 mA bias current to forward Biased PIN Diode, Rbias = [ ( -12V + 2.0 V ) / - 0.05 A ] – 75Ω = 125 Ω. In this example, using Rbias = 120 Ω ,Tx Bias Voltage ~ - [ (120 Ω*0.05A ) + 1.0 V ] ~ -7.0 V. Using + Vcc = + 5V, the “ OFF “ Series Diode will have a Back Biased Voltage ~ | -6.0 V - ( 5 - 0.8 ) V | = | -10.2 V |. 4. The SP2T Switch can be operated from –Vee = -5V with slightly degraded Tx linearity. 10 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.