MASW-008566

RoHS Compliant GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Features • • • • • • • • • • Low Voltage Operation: 2.5 V Low Harmonics: < -65 dBc at +34 dBm & 1 GHz Low Insertion Loss: 0.65 dB at 1 GHz High Isolation: 23 dB at 2 GHz 0.5 micron GaAs PHEMT Process Lead-Free 4x4 mm PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MASWSS0118 MASW-008566 V1 Functional Schematic Description M/A-COM’s MASW-008566 is a GaAs PHEMT MMIC single pole four throw (SP4T) high power switch in a low cost 4 mm 16-lead PQFN package. The MASW-008566 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size, and low cost are required. Pin Configuration Typical applications are for GSM and DCS handset systems that connect separate transmit and receive functions to a common antenna, as well as other handset and related applications. This part can be used in all systems operating up to 3.0 GHz requiring high power at low control voltage. The MASW-008566 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Pin No. 1 2 3 4 5 6 7 8 9 Pin Name V1 RF1 GND RF2 GND V2 V3 GND RF3 GND GND RF4 GND V4 GND ANT Paddle 2 Description Control 1 RF Port 1 RF Ground RF Port 2 RF Ground Control 2 Control 3 RF Ground RF Port 3 RF Ground RF Ground RF Port 4 RF Ground Control 4 RF Ground Antenna Port RF Ground Ordering Information Part Number MASW-008566-TR3000 10 Package 3000 piece reel 11 12 13 1. Reference Application Note M513 for reel size information 14 15 16 17 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Electrical Specifications: TA = 25°C, Z0 = 50 Ω 3 Parameter Insertion Loss 4 MASW-008566 V1 Test Conditions DC – 1 GHz 1 – 2 GHz 2 - 3 GHz DC – 1 GHz 1 – 2 GHz 2 - 3 GHz DC – 3 GHz Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz VC = 0 V / 2.5 V Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz VC = 0 V / 2.5 V VC = 0 V / 2.5 V 1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V 1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V 10% RF to 90% RF, 90% to 10% RF, VC = 0 V / 2.5 V 50% control to 90% RF, 50% control to 10% RF, VC = 0 V / 2.5 V Units dB dB dB dB dB dB dB dBm dBm dBm dBc dBc µS µS mV Min. — — — 27 21 — — — — — — — — — — — Typ. 0.65 0.80 1.00 29.0 23.0 18.5 20 57 81 38 -80 -68 0.2 0.2 35 10 Max. 0.85 1.00 — — — — — — — — -71 -65 — — — 50 Isolation Return Loss IP3 IP2 P.1dB 2 nd rd Harmonic 3 Harmonic Trise, Tfall Ton, Toff Transients Control Current VC = 0 V / 2.5 V, 34 dBm µA 3. External DC blocking capacitors are required on all RF ports. 4. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 39 pF for 0.5 - 3 GHz. Absolute Maximum Ratings 5,6 Parameter Input Power (0.5 - 3.0 GHz, 2.5 V Control) Voltage Operating Temperature Storage Temperature Truth Table 7,8 V1 1 0 0 0 Absolute Maximum +38 dBm ± 8.5 volts -40 C to +85 C -65°C to +150°C ° ° V2 0 1 V3 0 0 1 0 V4 0 0 0 1 ANTRF1 On Off Off Off ANTRF2 Off On Off Off ANTRF3 Off Off On Off ANTRF4 Off Off Off On 0 0 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. M/A-COM does not recommend sustained operation near these survivability limits. 7. Differential voltage, V (state 1) -V (state 2), must be 2.5 V minimum. 8. 0 = -5 V to +2.5 V, 1 = -2.5 V to +5 V Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Typical Performance Curves Insertion Loss vs. Temperature 1.6 MASW-008566 V1 Isolation vs. Temperature 40 35 1.2 30 0.8 25 0.4 +25°C +85°C -40°C +25°C +85°C -40°C 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 15 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) 1 GHz 2nd Harmonic Rejection -50 1 GHz 3rd Harmonic Rejection -50 -60 +25°C +85°C -40°C -60 -70 -70 -80 -80 -90 -90 +25°C +85°C -40°C -100 2.0 2.5 3.0 3.5 4.0 4.5 5.0 -100 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Control Voltage (V) Control Voltage (V) Lead-Free 4 mm 16-Lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.