MASWSS0115SMB

RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz Features • • • • • • • • Low Insertion Loss: 0.3 dB @ 2.4 GHz Moderate Isolation: 22 dB @ 2.4 GHz Low Power Consumption: 50 MHz Two Tone, +5 dBm/tone, 5 MHz Spacing, >50 MHz Vc = 0 V/2.5 V Vc = 0 V/3.0 V 10% to 90% RF, 90% to 10% RF 50% control to 90% RF, 50% control to 10% RF In band Vc = 2.5 V Units dB dB dB dB dB dBm dBm dBm dBm nS nS mV µA Min. — — 20 — — — — — — — — — — Typ. 0.25 0.30 24 22 20 90 46 21 25 35 40 10 5 Max. 0.40 0.55 — — — — — — — — — — 20 External DC blocking capacitors are required on all RF ports. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 GHz - 3 GHz. Truth Table 7,8 Control V1 0 1 7. 8. Lead-Free SC-70 (SOT-363)† RFC-RF1 On Off Control V2 1 0 RFC-RF2 Off On Differential voltage, V(state 1) - V(state 0), must be +2.3 V minimum. 0 = 0 V ± 0.2 V, 1 = +2.3 V to 5.0 V Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. † Reference Application Note M538 for lead-free solder reflow recommendations. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz Typical Performance Curves Return Loss vs. Frequency 0 +25°C +85°C -40°C MASWSS0115 V5 Isolation vs. Frequency 30 +25°C +85°C -40°C 10 28 20 26 30 24 40 22 50 0.5 1.0 1.5 2.0 2.5 3.0 20 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency 0.5 +25°C +85°C -40°C Die Bond Pad Layout 0.4 0.3 0.2 0.1 0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.