MASWSS0118

GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Features • • • • • • Low Voltage Operation: 2.5 V Low Harmonics: < -65 dBc at +34 dBm & 1 GHz Low Insertion Loss: 0.65 dB at 1 GHz High Isolation: 23 dB at 2 GHz 4 mm 16-Lead PQFN Package 0.5 micron GaAs PHEMT Process MASWSS0118 V2 Functional Schematic GND GND ANT 39 pF Pin 16 Pin 1 V1 RF1 39 pF V4 RF4 39 pF Description M/A-COM’s MASWSS0118 is a GaAs PHEMT MMIC single pole four throw (SP4T) high power switch in a low cost 4 mm 16-lead PQFN package. The MASWSS0118 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size, and low cost are required. Typical applications are for GSM and DCS handset systems that connect separate transmit and receive functions to a common antenna, as well as other handset and related applications. This part can be used in all systems operating up to 3.0 GHz requiring high power at low control voltage. The MASWSS0118 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. GND GND RF3 39 pF GND RF2 39 pF GND Pin Configuration Pin No. 1 2 3 4 5 6 Pin Name V1 RF1 GND RF2 GND V2 V3 GND RF3 GND GND RF4 GND V4 GND ANT Paddle 2 GND Description Control 1 RF Port 1 RF Ground RF Port 2 RF Ground Control 2 Control 3 RF Ground RF Port 3 RF Ground RF Ground RF Port 4 RF Ground Control 4 RF Ground Antenna Port RF Ground V2 Ordering Information Part Number MASWSS0118TR MASWSS0118TR-3000 MASWSS0118SMB 7 Package 1000 piece reel 3000 piece reel Sample Test Board 8 9 10 11 12 13 14 15 16 17 1. Reference Application Note M513 for reel size information. 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. V3 GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Electrical Specifications: TA = 25°C, Z0 = 50 Ω 3 Parameter Insertion Loss 4 MASWSS0118 V2 Test Conditions DC – 1 GHz 1 – 2 GHz 2 - 3 GHz DC – 1 GHz 1 – 2 GHz 2 - 3 GHz DC – 3 GHz Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz VC = 0 V / 2.5 V Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz VC = 0 V / 2.5 V VC = 0 V / 2.5 V 1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V 1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V 10% RF to 90% RF, 90% to 10% RF, VC = 0 V / 2.5 V 50% control to 90% RF, 50% control to 10% RF, VC = 0 V / 2.5 V Units dB dB dB dB dB dB dB dBm dBm dBm dBc dBc µS µS mV Min. — — — 27 21 — — — — — — — — — — — Typ. 0.65 0.80 1.00 29.0 23.0 18.5 20 57 81 38 -80 -68 0.2 0.2 35 10 Max. 0.85 1.00 — — — — — — — — -71 -65 — — — 50 Isolation Return Loss IP3 IP2 P.1dB 2 Harmonic 3 Harmonic Trise, Tfall Ton, Toff Transients Control Current rd nd VC = 0 V / 2.5 V, 34 dBm µA 3. External DC blocking capacitors are required on all RF ports. 4. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 500 MHz, 39 pF for 0.5 GHz - 3 GHz. Absolute Maximum Ratings 5,6 Parameter Input Power (0.5 - 3.0 GHz, 2.5 V Control) Voltage Operating Temperature Storage Temperature Truth Table 7,8 V1 1 Absolute Maximum +38 dBm V2 0 1 V3 0 0 1 0 V4 0 0 0 1 ANTRF1 On Off Off Off ANTRF2 Off On Off Off ANTRF3 Off Off On Off ANTRF4 Off Off Off On ± 8.5 volts -40 C to +85 C -65°C to +150°C ° ° 0 0 0 0 0 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. M/A-COM does not recommend sustained operation near these survivability limits. 7. Differential voltage, V (state 1) -V (state 2), must be 2.5 V minimum. 8. 0 = -5 V to +2.5 V, 1 = -2.5 V to +5 V Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Typical Performance Curves Insertion Loss vs. Temperature +25°C 1.6 1.4 +85°C -40°C 40 35 MASWSS0118 V2 Isolation vs. Temperature +25°C +85°C -40°C Insertion Loss (dB) 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Isolation (dB) 30 25 20 15 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) 1 GHz 2nd Harmonic Rejection 25°C -50 85°C -40°C 1 GHz 3rd Harmonic Rejection 25°C -50 -60 -70 -80 -90 -100 2.0 85°C -40°C -70 -80 -90 -100 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Harmonic (dBc) -60 Harmonic (dBc) 2.5 3.0 3.5 4.0 4.5 5.0 Control Voltage (V) Control Voltage (V) 4 mm 16-Lead PQFN 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.