MASWSS0136

RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz Features • • • • • • • Low Insertion Loss: 0.4 dB @ 2.4 GHz Moderate Isolation: 27 dB @ 2.4 GHz Low Power Consumption: 5 μA @ +3.0 V Lead-Free SC-70 (SOT-363) Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible MASWSS0136 V2 Functional Schematic C = 39 pF V1 RFC V2 Description M/A-COM’s MASWSS0136 is a GaAs PHEMT MMIC SPDT switch in a lead-free SC-70 (SOT-363) surface mount plastic package. The MASWSS0136 is ideally suited for applications where very small size and low cost are required. Typical applications are transmit / receive (Tx / Rx) switching in linear systems such as WLAN 802.11b/g. Other applications include 1.9 GHz and 2.4 GHz DECT and linear systems operating up to 3.0 GHz. The MASWSS0136 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. RF1 GND RF2 Pin 1 C = 39 pF C = 39 pF Pin Configuration Pin No. 1 2 3 4 Pin Name RF1 GND RF2 V2 RFC V1 Description RF Port 1 Ground RF Port 2 Control 2 RF Input Control 1 Ordering Information1 Part Number MASWSS0136 MASWSS0136TR-3000 MASWSS0136SMB 5 6 Package Bulk packaging 3000 piece reel Sample Board Absolute Maximum Ratings 2,3 Parameter Input Power (0.5 - 3.0 GHz) 3 V Control Voltage Operating Temperature Storage Temperature Absolute Maximum +30 dBm -8.5 V < Vc < +8.5 V -40°C to +85°C -65°C to +150°C 1. Reference Application Note M513 for reel size information. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, Z0 = 50 Ω 4 Parameter Insertion Loss5 Isolation VSWR IP2 IP3 MASWSS0136 V2 Test Conditions 1.0 GHz 2.4 GHz 1.0 GHz 2.4 GHz 0.05 - 3.0 GHz Two Tone, +5 dBm / Tone, 5 MHz Spacing 2.4 GHz Two Tone, +5 dBm / Tone, 5 MHz Spacing 2.4 GHz 2.5 GHz, OFDM, QAM-64,54Mbps, EVM=2.5% 3.0 V 3.3 V 5.0 V — 10% to 90% RF and 90% to 10% RF 50% control to 90% RF, 50% control to 10% RF — VC = 3.0 V Units dB dB dB dB Ratio dBm dBm dBm dBm dBm dBm nS nS mV µA Min. — — — 25 — — — — — — — — — — — Typ. 0.3 0.4 24 27 1.2:1 80 48 22.5 24.0 28.5 28 35 40 10 5 Max. — 0.5 — — — — — — — — — — — — 10 Linear Pout P1dB Trise, Tfall Ton, Toff Transients Current 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz – 1.0 GHz, 39 pF for 0.5 - 3.0 GHz. Truth Table 6,7 Control V1 0 1 Lead-Free SC-70 (SOT-363)† RFC-RF1 On Off Control V2 1 0 RFC-RF2 Off On 6. Differential voltage, V (state 1) - V (state 0), must be +2.3 V minimum and must not exceed 8.5 V. 7. 0 = 0 V ± 0.2 V, 1 = +2.5 V to 5.0 V Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Switch DC - 3.0 GHz Typical Performance Curves Insertion Loss 0.8 MASWSS0136 V2 Isolation 35 0.6 +25°C -40°C +85°C 30 +25°C -40°C +85°C 0.4 25 0.2 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 15 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) VSWR 2.00 EVM vs. Pout @ 2.5 GHz 10 +25°C -40°C +85°C 1.75 8 EVM @ 3 V EVM @ 3.3 V EVM @ 5 V 6 1.50 4 1.25 2 1.00 0.5 0 1.0 1.5 2.0 2.5 3.0 10 15 20 25 30 35 Frequency (GHz) Pout (dBm) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.