MASWSS0148

RoHS Compliant GaAs SPST High Isolation Terminated Switch 0.3 - 4.0 GHz Features • • • • • • • • • High Isolation: 55 dB @ 2 GHz Insertion Loss: 1.6 dB @ 2 GHz Terminated RF Input in Isolation State Single Positive Control CMOS Compatible Logic Lead-Free 3 mm 12-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible MASWSS0148 V1 Schematic with Off-Chip Components1 RFin CBlock 10 KΩ VDD 1 VCTRL CBypass Description M/A-COM’s MASWSS0148 is a GaAs monolithic single pole single throw (SPST) terminated switch in a lead-free 3 mm 12-lead PQFN plastic package. The MASWSS0148 is ideally suited for use where low power consumption, small size and high isolation are required. Typical applications include PCS and GSM LO switching, switch matrices and switched filter banks in systems such as radio and cellular equipment. The MASWSS0148 is fabricated using a mature 1-micron gate length GaAs MESFET process. The process features full chip passivation for increased performance and reliability. 1. 50Ω CBlock RFout VDD can be injected at either pin 5 or pin 11. Pin Configuration Pin No. 1 2 3 4 Function No Connection No Connection No Connection No Connection RF Output No Connection Pin No. 7 8 9 10 11 12 13 Function No Connection No Connection VCTRL No Connection RF Input No Connection Paddle2 Ordering Information Part Number MASWSS0148TR-3000 MASWSS0148SMB 5 6 Package 3000 piece reel Sample Test Board 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. Note: Reference Application Note M513 for reel size information. Absolute Maximum Ratings 3,4 Parameter Input Power Operating Voltage (VDD, VCTRL) Operating Temperature Storage Temperature Absolute Maximum 23 dBm (VDD = VCTRL = 5 V) 8.5 V -40°C to +85°C -65°C to +125°C 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPST High Isolation Terminated Switch 0.3 - 4.0 GHz MASWSS0148 V1 Electrical Specifications: TA = 25°C, VDD = 5 V, VCTRL = 0 / 5 V, 100 pF capacitors, Z0 = 50 Ω 5 Parameter Insertion Loss 6 Test Conditions 0.3 - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz Insertion Loss State, 0.3 - 4.0 GHz Isolation State — 10% to 90% RF 90% to 10% RF 50% Control to 90% RF 50% Control to 10% RF In-Band 2-Tone, 5 MHz spacing, +10 dBm / tone 2-Tone, 5 MHz spacing, +10 dBm / tone Input Power = 10 dBm Input Power = 10 dBm Units dB dB dB dB dB dB dB dB dB dB dBm µS µS µS µS mV dBm dBm µA µA Min. — — — — 50 — — — — — — — — — — — — — — — Typ. 1.5 1.6 1.7 1.75 55 55 48 40 17 20 27 3 0.3 3.5 0.4 20 72 49 1 1 Max. 1.7 — — — — — — — — — — — — — — — — — 6 6 Isolation Return Loss Input Return Loss Input 1 dB Compression Trise, Tfall Ton, Toff Transients Input IP2 Input IP3 Current (ICTRL) Current (IDD) 5. For positive voltage control, external DC blocking capacitors are required on all RF ports. 6. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 300 MHz - 1 GHz, 39 pF for 0.5 GHz - 4 GHz. Truth Table 7,8 VCTRL 0 1 Handling Procedures RFin 50 Ω Termination RFout RFout Open RFin Please observe the following precautions to avoid damage: 7. Differential voltage, V(state 1) - V(state 0), must be +2.5 V minimum and must not exceed 8.5 V. 8. 0 = 0 V ± 0.2 V, 1 = VDD = 2.5 V to 8.5 V Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPST High Isolation Terminated Switch 0.3 - 4.0 GHz Typical Performance Curves (VDD = 5 V, VCTRL = 0 / 5 V, 100 pF capacitors) Insertion Loss 2.5 MASWSS0148 V1 Isolation 70 2.0 60 1.5 50 1.0 40 0.5 +25°C +85°C -40°C 30 +25°C +85°C -40°C 0.0 0 1 2 3 4 20 0 1 2 3 4 Frequency (GHz) Frequency (GHz) Return Loss (Insertion Loss State) 0 Input Return Loss (Isolation State) 0 +25°C +85°C -40°C 10 +25°C +85°C -40°C 10 20 20 30 30 40 0 1 2 3 4 40 0 1 2 3 4 Frequency (GHz) Frequency (GHz) P1dB 30 25 20 P0.1dB 30 25 20 15 10 5 0 2.0 0.5 GHz 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz 15 10 5 0 2.0 0.5 GHz 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz 2.5 3.0 3.5 DD 4.0 4.5 5.0 2.5 3.0 3.5 DD 4.0 4.5 5.0 V =V CTRL (V) V =V CTRL (V) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPST High Isolation Terminated Switch 0.3 - 4.0 GHz Typical Performance Curves (VDD = 5 V, VCTRL = 0 / 5 V, 100 pF capacitors) IP3 60 0.5 GHz 1.0 GHz 2.0 GHz 3.0 GHz 4.0 GHz MASWSS0148 V1 50 40 30 20 2.0 2.5 3.0 3.5 DD 4.0 4.5 5.0 V =V CTRL (V) Lead-Free 3 mm 12-Lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.