MASWSS0180TR

RoHS Compliant GaAs SPDT Terminated Switch DC - 2.5 GHz Features • • • • • • • • • • Very Low Power Consumption High Isolation: 30 dB up to 2 GHz Very High Intercept Point: 46 dBm IP3 Nanosecond Switching Speed Temperature Range: -40°C to +85°C Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of SW-338 MASWSS0180 V1 Functional Schematic Pin 1 V2 RFC V1 GND RF2 GND GND RF1 Description M/A-COM’s MASWSS0180 is a GaAs MMIC SPDT terminated switch in a lead-free SOIC 8-lead surface mount plastic package. The MASWSS0180 is ideally suited for use where very low power consumption is required. Typical applications include transmit/receive switching, switch matrices, and filter banks in systems such as radio and cellular equipment, PCM, GPS, fiber optic modules, and other battery powered radio equipment. The MASWSS0180 is fabricated with a monolithic GaAs MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability. Pin Configuration Pin No. 1 2 3 4 Function V2 RF Common V1 Ground Pin No. 5 6 7 8 Function RF Port 1 Ground Ground RF Port 2 Absolute Maximum Ratings 1,2 Parameter Input Power 0.05 GHz 0.5 - 2.0 GHz Control Voltage Absolute Maximum +27 dBm +34 dBm -8.5 V < Vc < + 5 V -40°C to +85°C -65°C to +150°C Ordering Information Part Number MASWSS0180 MASWSS0180TR MASWSS0180SMB Package Bulk Packaging 1000 piece reel Sample Test Board Operating Temperature Storage Temperature 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Terminated Switch DC - 2.5 GHz Electrical Specifications: TA = 25°C, Vc = 0 V / -2.9 V, Z0 = 50 Ω Parameter Insertion Loss MASWSS0180 V1 Test Conditions DC - 0.5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz DC - 0.5 GHz 0.5 - 1.0 GHz 1.0 - 2.0 GHz DC - 2.0 GHz 10% to 90% RF, 90% to 10 % RF 50% Control to 90% RF, 50% Control to 10% RF In-Band Input Power 0.05 GHz 0.5 - 2.0 GHz Measured Relative to Input Power (for two-tone input power up to +5 dBm) 0.05 GHz 0.5 - 2.0 GHz Measured Relative to Input Power (for two-tone input power up to +5 dBm) 0.05 GHz 0.5 - 2.0 GHz Vc = 2.9 V Units dB dB dB dB dB dB Ratio nS nS mV dBm dBm Min. — — — — 36 — — — — — — — Typ. 3 0.55 0.60 0.65 50 43 35 1.1:1 10 20 25 25 30 Max. — 0.7 — — — — — — — — — — Isolation VSWR On/Off Trise, Tfall Ton, Toff Transients 1 dB Compression Point 2nd Order Intercept dBm dBm — — 60 65 — — 3rd Order Intercept dBm dBm µA — — — 40 46 15 — — 35 Control Current 3. Typical values represent performance at middle of frequency range noted. Truth Table 4 Control Inputs V1 1 0 Handling Procedures Condition of Switch RF Common to Each RF Port RFC-RF1 ON OFF Please observe the following precautions to avoid damage: V2 0 1 RFC-RF2 OFF ON Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4. 0 = 0 V ± 0.2 V, 1 = -2.9 V to -5.0 V 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SPDT Terminated Switch DC - 2.5 GHz Lead-Free SOIC-8† MASWSS0180 V1 † Reference Application Note M538 for lead-free solder reflow recommendations. Typical Performance Curves Insertion Loss +25C 1.0 0.8 0.6 0.4 0.2 0.0 0.0 0.5 1.0 1.5 2.0 2.5 +85C -40C 100 80 Isolation +25C +85C -40C Insertion Loss (dB) Isolation (dB) 60 40 20 0 0.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Frequency (GHz) VSWR vs. Frequency +25C 1.5 1.4 1.3 +85C -40C VSWR 1.2 1.1 1.0 0.0 0.5 1.0 1.5 2.0 2.5 3 Frequency (GHz) M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.