MASWSS0201

RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Features • • • • • • • • • • • • Ideal for CATV, DTV, DVR, STB Applications Default-On in Unpowered State (RFC-RF1 Path) Broadband Performance: DC-2.5 GHz Low Insertion Loss: 1.1 dB at 1 GHz High Isolation: > 60dB @ 100MHz Single Control Operation Power Handling: > 20 dBm P1dB Lead-Free 3 mm 12-lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible Configurable for Non-terminated Operation MASWSS0201 V1 Functional Schematic Description M/A-COM’s MASWSS0201 is a broadband GaAs PHEMT MMIC SPDT terminated switch in a low cost, lead-free 3 mm 12-lead PQFN package. The MASWSS0201 is ideally suited for applications where an unpowered on state is critical in a single control line SPDT terminated switch. The unpowered condition is the same as the VC = 0 condition. This part can also be configured as a reflective switch with minimal impact to the RF performance. The MASWSS0201 delivers high isolation, low insertion loss and high linearity up to 2.5 GHz. The MASWSS0201 is fabricated using a 0.5 micron gate length GaAs E/D PHEMT process. The process features full passivation for performance and reliability. Pin Configuration 2 Pin No. 1 2 3 4 5 6 7 8 9 10 Pin Name N/C RF1 Term 1 GND GND N/C GND Term 2 GND3 RF2 VC GND RFC GND Paddle 4 3 Description No Connection RF Port 1 Termination 1 Ground Ground No Connection Ground Termination 2 Ground RF Port 2 Control Ground RF Input Ground RF and DC Ground Ordering Information 1 Part Number MASWSS0201TR-3000 MASWSS0201SMB 11 12 Package 13 3000 piece reel Sample Test Board (Includes 5 Samples) 1. Reference Application Note M513 for reel size information. 2. M/A-COM recommends that all unused (N/C) pins be connected to ground. All data on this datasheet was taken with N/C pins connected to ground. 3. Terminated grounds require DC blocking capacitors; see application schematic. 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Electrical Specifications: TA = 25°C, Z0 = 75 Ω, VC = 0 V/3 V, PIN = 0 dBm 5 Parameter Insertion Loss RFC to RF1 (VC = 0V) Insertion Loss RFC to RF2 (VC = 3V) MASWSS0201 V1 Test Conditions 100 MHz 1.0 GHz 2.0 GHz 100 MHz 1.0 GHz 2.0 GHz 100 MHz 1.0 GHz 2.0 GHz (RFC - RF1) 2.0 GHz (RFC - RF2) DC - 2.0 GHz Two Tone, +5 dBm/Tone, 10 MHz Spacing 100 MHz 1.0 GHz Two Tone, +5 dBm/Tone, 10 MHz Spacing 100 MHz 1.0 GHz 100 MHz 1.0 GHz 10% to 90% RF 90% to 10% RF 50% control to 90% RF 50% control to 10% RF — V C = 3V Units dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm µS nS µS nS mV µA Min. — — — — — — 60 40 — — — — — — — — — — — — — — — Typ. 0.9 1.0 1.3 1.0 1.2 1.5 65 45 38 43 25 54 / 51 / 53 72 / 70 / 70 38 / 38 / 39 41 / 44 / 44 21 / 21 / 22 29 / 28 / 29 1.4 12 1.6 12 550 250 Max. 1.75 1.85 — 1.65 1.85 — — — — — — — — — — — — — — — — — 500 Isolation Return Loss IIP2 (VC = 0V / 3V / 5V) IIP3 (VC = 0V / 3V / 5V) Input P1dB (VC = 0V / 3V / 5V) T-rise T-fall Ton Toff Transients Control Current 5. Electrical specifications apply to terminated configuration only. Absolute Maximum Ratings 6,7 Parameter Input Power @ 100 MHz Input Power @ 1 GHz Operating Voltage Operating Temperature Storage Temperature Truth Table 8,9,10 Control VC 0 1 ° Absolute Maximum +22 dBm +29 dBm +8.5 volts -40 C to +85 C -65°C to +150°C ° RFC-RF1 On Off RFC-RF2 Off On 8. External DC blocking capacitors are required on all RF ports. 9. 0 = 0 ± 0.1 V, 1 = +2.9 V to +5 V. 10. The unpowered on state is the same as VC=0. 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM does not recommend sustained operation near these survivability limits. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz MASWSS0201 V1 Typical Performance Curves: TA = 25°C, Z0 = 75 Ω, Components per Application Schematic Insertion Loss 0.0 RFC to RF1 (Vc=0V) RFC Return Loss 0 RFC to RF1 (Vc=0V) -0.5 RFC to RF2 (Vc=3V) -10 RFC to RF2 (Vc=3V) -1.0 -20 -1.5 -30 -2.0 -2.5 -40 -3.0 0.0 -50 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Isolation (Below 200 MHz) -40 RFC to RF1 (Vc=3V) RF1 Return Loss 0 RF1 to RFC (Vc=0V) -50 RFC to RF2 (Vc=0V) -10 RF1 Terminated (Vc=3V) -60 -20 -70 -30 -80 -40 -90 25 50 75 100 125 150 175 200 225 250 -50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (MHz) Frequency (GHz) Isolation (Above 200 MHz) -20 RFC to RF1 (Vc=3V) RF2 Return Loss 0 RF2 to RFC (Vc=3V) -30 RFC to RF2 (Vc=0V) -10 RF2 Terminated (Vc=0V) -40 -20 -50 -30 -60 -40 -70 0.0 -50 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Frequency (GHz) • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Lead-Free 3 mm 12-lead PQFN† MASWSS0201 V1 † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Application Schematic 11,12 C1-C5=10000 pf C6=100 pf Qualification Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. M/A-COM’s AN3007 Application Note outlines a method for ESD sensitivity mitigation. It can be found at the Tech/Apps section of the MACOM.COM website. 11. Non-connected pins (P1 and P5) are shown connected to ground as recommended. All data on this datasheet was taken with N/C pins connected to ground. 12. Application schematic shown is for terminated configuration. For non-terminated operation Term 1 and Term 2 ground pins are left open. See application section for data in unterminated configuration. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Application Section Typical Performance Curves: TA = 25°C, Z0 = 75 Ω, Unterminated Configuration (Term 1&2 GND pins open) Insertion Loss 0.0 RFC to RF1 (Vc=0V) MASWSS0201 V1 RFC Return Loss 0 RFC to RF1 (Vc=0V) -0.5 RFC to RF2 (Vc=3V) -10 RFC to RF2 (Vc=3V) -1.0 -20 -1.5 -30 -2.0 -2.5 -40 -3.0 0.0 -50 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Isolation (Below 200 MHz) -40 RFC to RF1 (Vc=3V) RF1 Return Loss 0 -50 RFC to RF2 (Vc=0V) -10 RF1 to RFC (Vc=0V) RF1 Unterminated (Vc=3V) -60 -20 -70 -30 -80 -40 -90 25 50 75 100 125 150 175 200 225 250 -50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (MHz) Frequency (GHz) Isolation (Above 200 MHz) -20 RFC to RF1 (Vc=3V) RF2 Return Loss 0 -30 RFC to RF2 (Vc=0V) -10 RF2 to RFC (Vc=3V) RF2 Unterminated (Vc=0V) -40 -20 -50 -30 -60 -40 -70 0.0 -50 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Frequency (GHz) • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Application Section Application Schematic – Unterminated Configuration C1-C3 = 10000 pf C4 = 100 pf MASWSS0201 V1 6 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.