NANOSMDC110F

Tyco / Electronics Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 PRODUCT: nanoSMDC110F PolySwitch® PTC Devices Overcurrent Protection Device DOCUMENT: SCD 25078 PCN: 048616 REV LETTER: F REV DATE: MAY 11, 2006 PAGE NO.: 1 OF 1 Specification Status: Released Maximum Electrical Rating Voltage: 6.0VDC MAX Short Circuit Current: 100A Notes: 1. All terminations are Tin plated. 2. Drawing not to scale Marking: TABLE I. DIMENSIONS: A B C D E MIN MAX MIN MAX MIN MAX MIN MAX MIN 3.00 3.40 0.67 1.00 1.37 1.80 0.25 0.75 0.076 (0.118) (0.134) (0.026) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) mm: in: TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS** TIME TO TRIP ** SECONDS AT 20°C, 8.0A MAX 0.1 RESISTANCE TRIPPEDVALUES STATE POWER DISSIPATION** OHMS WATTS AT AT 20°C 20°C, 6.0V MIN MAX* MAX 0.07 0.20 0.8 AMPERES AMPERES AMPERES AT 0°C AT 20°C AT 60°C HOLD TRIP HOLD TRIP HOLD TRIP 1.30 2.60 1.10 2.20 0.80 1.60 * Maximum resistance is measured 1 hour after reflow. ** Values specified were determined using PCB’s with 0.030”X1.5 ounce copper traces. Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: UL, CSA, TÜV PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flam Materials Information ROHS Compliant ELV Compliant Pb-Free © 2006 Tyco Electronics Corporation. All rights reserved.