PCH-124D2M

PCH-124D2M

  • 厂商:

    MACOM

  • 封装:

  • 描述:

    PCH-124D2M - Miniature Power PCB Relay PCH - Tyco Electronics

  • 详情介绍
  • 数据手册
  • 价格&库存
PCH-124D2M 数据手册
General Purpose Relays SCHRACK Miniature Power PCB Relay PCH n n n n 1pole 5 A, 1CO or 1NO contact Sensitive 200 mW coil available Version PCH-WG with tracking resistance PTI 250 on relay base and cover WG version: Product in accordance to IEC60335-1 Applications Domestic appliances, heating control, building control, measurement & control F_PCH_B Approvals PCH / PCH-WG: Technical data of approved types on request V 119568 Z E82292 Contact data Contact configuration Contact set Type of interruption Rated voltage / max. switching voltage AC Rated current Limiting continuous current Maximum breaking capacity AC Contact material Rated frequency of operation with / without load Operate- / release time Bounce time NO contact Contact ratings Type Contact IEC 61810 PCH-…2M-WG PCH-…D2-WG PCH-…D2M PCH-…L2M PCH-…D2 UL 508 PCH NO NO of CO NO NO CO NO Load PCH PCH-WG 1 CO or 1 NO single contact micro-disconn. 250 / 400 VAC 5A 5 A, UL: 10 A 1250 VA AgSnO2 6/600 min-1 max. 10/5 ms max. 10 ms Ambient temp. [°C] 85°C 85°C 70°C 70°C 40°C 85°C Cycles 100x103 100x103 100x103 30x103 30x103 100x103 5 A, 250 VAC, cosϕ=1 5 A, 250 VAC, cosϕ=1 5 A, 250 VAC, cosϕ=1 5 A, 250 VAC, cosϕ=1 5 A/3 A, 250 VAC, cosϕ=1 5 A, 250 VAC, general use Coil data Rated coil voltage range DC coil Operative range to IEC 61810 Coil insulation system according UL1446 standard 5...48 VDC 1 class F sensitiv 5...24 VDC Coil versions, DC-coil - standard Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 05 5 3.75 0.5 62.5+10% 400 06 6 4.5 0.6 80+10% 400 09 9 6.3 0.9 202.5+10% 400 12 12 8.4 1.2 360+10% 400 24 24 16.8 2.4 1440+10% 400 48 48 33.6 4.8 5760+10% 400 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays SCHRACK Miniature Power PCB Relay PCH (Continued) Coil versions, DC-coil - sensitive Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 05 5 3.75 0.5 125+10% 200 06 6 4.5 0.6 180+10% 200 09 9 6.75 0.9 400+10% 200 12 12 9.0 1.2 720+10% 200 24 24 18.0 2.4 2800+10% 200 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request PCB layout / terminal assignment Bottom view on solder pins Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit NO: CO: Material group of insulation parts Tracking index of relay base, standard version WG-version Insulation to IEC 61810-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category 4000 Vrms 1000 Vrms 5.5 / 9 mm 4.5 / 9 mm IIIa PTI 175 PTI 250 basic micro disconnection 250 V 3 230 / 400 V III S0550-AB S0550-AA Other data Mechanical endurance, standard version 1.5x106 cycles WG version 10x106 cycles Material RoHS - Directive 2002/95/EC compliant as per product date code 0424 Resistance to heat and fire, WG-version according EN60335, par.30 Environment Ambient temperature range all WG-versions: -40...85°C Standard NO: -30...70°C Standard CO: -30...40°C Vibration resistance (function) NO / NC contact >14 / 8 g, 30...400 Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof RTIII - wash tight Processing Mounting PCB Resistance to soldering heat flux-proof version 270°C / 10 s wash-tight version 260°C / 5 s Relay weight 7g Packaging unit 25/1000 pcs S0550-AC Dimensions S0551-B 2 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays SCHRACK Miniature Power PCB Relay PCH (Continued) Product key Type Typical product key PCH -1 12 D 2 PCH Miniature PCB Relay RE Version 1 1 pole Coil 05 5 VDC 06 6 VDC 09 9 VDC Coil power D standard 400 mW Contact material 2 AgSnO2 Contact configuration Blank 1 CO contact (1 form C) Enclosure Blank flux proof Version Blank standard version Other types on request 12 24 48 L 12 VDC 24 VDC 48 VDC sensitive 200 mW (for NO contact only) M H WG 1 NO contact (1 form A) wash tight Product in accordance with IEC 60335-1 (domestic appliances) Product Key PCH-105D2M PCH-106D2M PCH-109D2M PCH-112D2M PCH-124D2M PCH-148D2M PCH-105D2 PCH-106D2 PCH-109D2 PCH-112D2 PCH-124D2 PCH-148D2 PCH-105L2M PCH-106L2M PCH-109L2M PCH-112L2M PCH-124L2M PCH-105D2M-WG PCH-106D2M-WG PCH-109D2M-WG PCH-112D2M-WG PCH-124D2M-WG PCH-148D2M-WG PCH-105D2-WG PCH-106D2-WG PCH-109D2-WG PCH-112D2-WG PCH-124D2-WG PCH-148D2-WG PCH-105L2M-WG PCH-106L2M-WG PCH-109L2M-WG PCH-112L2M-WG PCH-124L2M-WG Version flux proof standard Contact material AgSnO2 Contacts 1 NO contact 1 CO contact flux proof sensitive 1 NO contact flux proof standard materials according IEC 60335-1 1 CO contact flux proof sensitive materials according IEC 60335-1 1 NO contact Coil 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC Part number 1461350-2 1461350-3 1461350-4 1461350-5 1461350-6 1461350-7 9-1440003-7 9-1440003-8 9-1440003-9 1440004-0 1440004-1 1461410-2 1461352-2 1461352-3 1461352-4 1461352-5 1461352-6 1721767-2 1721767-3 1721767-4 1721767-5 1721767-6 1721767-7 1721766-2 1721766-3 1721766-4 1721766-5 1721766-6 1721766-7 1721768-2 1721768-3 1721768-4 1721768-5 1721768-6 3 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.
PCH-124D2M
1. 物料型号: - 型号:PCH - 版本:1极 - 线圈电压:5VDC、6VDC、9VDC、12VDC、24VDC、48VDC - 线圈功率:标准400mW,敏感200mW(仅适用于NO接触) - 接触材料:AgSnO2 - 接触配置:1CO接触(1表C),1NO接触(1表A) - 外壳:防flux、防水洗紧 - 版本:标准版本、WG版本(符合IEC 60335-1家用器具)

2. 器件简介: - SCHRACK品牌的Miniature Power PCB Relay PCH,是一款1极5A、1CO或1NO接触的小型继电器,具有200mW的敏感线圈可供选择。PCH-WG版本符合IEC60335-1标准,适用于家用电器、加热控制、建筑控制、测量与控制等领域。

3. 引脚分配: - 底部视图显示焊盘上的端子分配。

4. 参数特性: - 接触设置:单接触 - 额定电压/最大切换电压AC:250/400 VAC - 额定电流:5A - 限制连续电流:5A,UL: 10A - 最大断开能力AC:1250VA - 接触材料:AgSnO2 - 额定操作频率带/不带负载:6/600次/分钟 - 操作/释放时间:最大10/5ms - 无接触反弹时间:最大10ms

5. 功能详解: - 线圈数据包括标准和敏感两种类型,提供了不同工作电压、释放电压、线圈电阻和额定线圈功率的数据。 - 绝缘性能包括介电强度、间隙/爬电距离、材料组、跟踪指数等。 - 其他数据包括机械耐久性、RoHS指令合规性、耐热防火性能、环境温度范围、冲击抵抗力、保护类别和加工信息。

6. 应用信息: - 应用领域包括家用电器、加热控制、建筑控制、测量与控制。

7. 封装信息: - 提供了继电器的尺寸图,尺寸以毫米为单位,仅供参考。
PCH-124D2M 价格&库存

很抱歉,暂时无法提供与“PCH-124D2M”相匹配的价格&库存,您可以联系我们找货

免费人工找货