RGEF1000-1

308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com PolySwitch® PTC Devices Overcurrent Protection Device Raychem Circuit Protection Products PRODUCT: RGEF1000-1 DOCUMENT: SCD 26496 PCN: RF0502 REV LETTER: C REV DATE: MARCH 7, 2008 PAGE NO.: 1 OF 1 Specification Status: Released Electrical Rating Voltage: Current: 16V MAX 100A MAX Insulating Material: Cured, Flame Retardant Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 20 AWG Tin Plated Copper Marking: TABLE I. DIMENSIONS: B MIN MAX MIN MAX -16.5 21.1 25.2 -(0.65) (0.83) (0.99) *Rounded off approximation A C MIN 4.3 (0.17) MAX 5.8 (0.23) MIN 25.4 (1.00) D MAX --MIN 2.0 (0.08) E MAX 3.0 (0.12) F TYP 1.2 (0.05) mm: in*: TABLE II. PERFORMANCE RATINGS: I HOLD RATED CURRENT CURRENT RATINGS INITIAL RESISTANCE VALUES TIME TO TRIP R1 MAX 1 HR. POST TRIP RESISTANCE STANDARD TRIP OHMS AT 25°C MAX 0.0102 TRIPPEDSTATE POWER DISSIPATION AMPS AT 25°C HOLD 10.0 AMPS AT 25°C HOLD TRIP 10.0 17.0 OHMS AT 25°C MIN MAX 0.0040 0.0070 UL, CSA, TUV. SECONDS AT 25°C, 50.0 A MAX 6.0 WATTS AT 25°C TYP 3.6 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant ELV Compliant Pb-Free © 2005, 2008 Tyco Electronics Corporation. All rights reserved.