RT314005

General Purpose Relays SCHRACK Power PCB Relay RT1 I I I I I I I 1 pole 12 / 16 A, 1 CO or 1 NO contact DC- or AC-coil Sensitive coil 400 mW 5 kV / 10 mm coil-contact, reinforced insulation Ambient temperature 85°C (DC-coil) WG version: Product in accordance to IEC60335-1 RoHS compliant (Directive 2002/95/EC) as per product date code 0413 Applications F0144-B Boiler control, timers, garage door control, POS automation, interface modules Approvals V REG.-Nr.of6106, Z E214025, b 14385, B C0786, H Technical data approved types on request Contact data 98.4118.01, Contact configuration 1 CO or 1 NO contact Contact set single contact Type of interruption micro disconnection Rated current 12 A 16 A Rated voltage / max.switching voltage AC 250/400 VAC Limiting continuous current UL: 20 A Maximum breaking capacity AC 3000 VA 4000 VA Limiting making capacity, max 4 s, df 10% 25 A 30 A Contact material AgNi 90/10, AgNi 90/10 gold plated Mechanical endurance DC coil > 30 x 106 cycles AC coil > 10 x 106 cycles Rated frequency of operation with / without load 6 / 1200 min-1 Contact Type RT314 RT314 RT314 RT314 RT314 RT314 RT314 RT314 RT314 RT314 RT314 ratings Load Cycles 16 A, 250 VAC, NO contact, 85°C, DF 10%, UL508 50x103 16 A, 250 VAC, NC contact, 70°C, 30min-1 53x103 20 A, 250 VAC, NO contact, 85°C, UL508 6x103 1000 W incandescent lamp, 250 VAC 1.2x103 10 A, 250 VAC, cosϕ=0.6, CO contact, 70°C 200x103 5 A / 2 A, 250 VAC, cosϕ=1, motor, NO contact, 10min-1, 70°C 1.1x106 0.26 A / 0.01 A, 230 VAC, cosϕ=0.38, valve, NO contact, 25min-1 7.6x106 Pilot duty A300 (NO contact), B300 (CO/NC contact), UL508 1hp @ 240 VAC, 1/2hp @ 120 VAC, NO contact, UL508 AC15, 6 A, 250 VAC, NO and NC contact, 85°C, EN60947-5-1 DC13, 2 A / 24 VDC, 0.2 A / 250 VDC, NO and NC contact, 85°C, EN60947-5-1 Coil data Rated coil voltage range DC coil AC coil Coil power DC coil AC coil Operative range Coil insulation system according UL1446 5...110 VDC 24...230 VAC typ 400 mW typ 0.75 VA 2 class F 1 Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays SCHRACK Power PCB Relay RT1 (Continued) Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 005 5 3.5 0.5 62+10% 403 006 6 4.2 0.6 90+10% 400 009 9 6.3 0.9 200+10% 400 012 12 8.4 1.2 360+10% 400 024 24 16.8 2.4 1440+10% 400 048 48 33.6 4.8 5520+10% 417 060 60 42.0 6.0 8570+12% 420 110 110 77.0 11.0 28800+12% 420 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request Coil versions, AC-coil 50Hz Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power 50 Hz 50 Hz 50 Hz VAC VAC VAC Ohm VA 524 24 18.0 3.6 350+10% 0.76 615 115 86.3 17.3 8100+15% 0.76 620 120 90.0 18.0 8800+15% 0.75 700 200 150.0 30.0 24350+15% 0.76 730 230 172.5 34.5 32500+15% 0.74 All figures are given for coil without preenergization, at ambient temperature +23°C Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree 12 A version 16 A version Rated voltage system Overvoltage category 5000 Vrms 1000 Vrms W 10 / 10 mm W IIIa PTI 250 V reinforced functional 250 V 3 3 240 V III 3 2 400 V Other data RoHS - Directive 2002/95/EC compliant as per product date code 0413 Flammability class according to UL94 V-0 For WG version: GWFI to IEC 60335-1 (IEC 60695-2-12) > 850 °C GWIT to IEC 60335-1 (IEC 60695-2-13) > 755 °C Ambient temperature range DC coil -40...+85°C AC coil -40...+70°C Operate- / release time DC coil typ 7 / 3 ms Bounce time DC coil, NO / NC contact typ 1 / 3 ms Vibration resistance (function), NO / NC contact 20 / 5 g, 30 ... 500 Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof, RTIII - wash tight Mounting pcb or on socket Mounting position any Mounting distance DC / AC coils 0 / 2.5 mm Resistance to soldering heat flux-proof version 270°C / 10 s wash-tight version 260°C / 5 s Relay weight 14 g Packaging unit 20 / 500 pcs Accessories For details see datasheet Accessories Power Relay RT 2 Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays SCHRACK Power PCB Relay RT1 (Continued) Dimensions S0272-BB PCB layout / terminal assignment Bottom view on solder pins *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. 12 A, pinning 3.5 mm 12 A, pinning 5 mm 16 A, pinning 5 mm S0418-CB S0418-CN S0418-CA 1 CO contact 1 CO contact 1 CO contact S0163-BG S0163-BC S0163-BE 1 NO contact 1 NO contact 1 NO contact S0163-BH S0163-BD S0163-BF Product key RT Type Version 1 12 A, pinning 3.5 mm, flux proof B 12 A, pinning 3.5 mm, wash tight 2 12 A, pinning 5 mm, flux proof *) 3 16 A, pinning 5 mm, flux proof D 16 A, pinning 5 mm, wash tight Contact configuration 1 1 CO contact 3 1 NO contact Contact material 4 AgNi 90/10 5 AgNi 90/10 gold plated (for type RT31.) Coil Coil code: please refer to coil versions table Version Blank Standard version WG Product in accordance with IEC 60335-1 (domestic appliances) Preferred types in bold print *) Wash tight version on request 3 Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays SCHRACK Power PCB Relay RT1 (Continued) Product key RT114005 RT114006 RT114012 RT114024 RT114048 RT114110 RT114524 RT114615 RT114730 RT134012 RT134024 RT214012 RT214024 RT314005 RT314006 RT314012 RT314024 RT314048 RT314060 RT314110 RT314524 RT314615 RT314730 RT315012 RT315024 RT315730 RT334012 RT334024 RT334048 RTB14005 RTB14012 RTB14024 RTB14048 RTD14005 RTD14006 RTD14012 RTD14015 RTD14024 RTD14048 RTD34005 RTD34012 RTD34024 Version 12 A pinning 3.5 mm flux proof Contacts 1 CO contact Cont. material AgNi 90/10 Coil DC-coil AC-coil 1 NO contact 12 A, pinning 5mm flux proof 16 A pinning 5 mm flux proof 1 CO contact DC-coil AC-coil AgNi 90/10 gold plated 1 NO contact 12 A pinning 3.5 mm wash tight 16 A pinning 5 mm wash tight 1 CO contact AgNi 90/10 DC-coil AC-coil DC-coil 1 NO contact Coil 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 110 VDC 24 VAC 115 VAC 230 VAC 12 VDC 24 VDC 12 VDC 24 VDC 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 60 VDC 110 VDC 24 VAC 115 VAC 230 VAC 12 VDC 24 VDC 230 VAC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 12 VDC 15 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC Part number 0-1393239-7 0-1393239-8 0-1419108-1 1-1393239-3 1-1393239-4 1-1393239-6 1-1393239-7 1-1393239-8 1-1393239-9 2-1393239-6 3-1393239-0 5-1393239-4 5-1393239-5 9-1393239-1 9-1393239-3 9-1393239-5 9-1393239-8 0-1393240-1 0-1393240-2 0-1393240-3 0-1393240-4 0-1393240-6 0-1393240-7 1-1393240-1 1-1393240-4 1-1419108-1 4-1393240-5 4-1393240-8 5-1393240-0 1-1393238-2 1-1393238-5 1-1393238-9 2-1393238-1 5-1393238-9 6-1393238-0 6-1393238-2 6-1393238-4 6-1393238-8 6-1393238-9 8-1393238-3 3-1419108-5 3-1419108-8 4 Datasheet Rev. HC1 Issued 2008/03 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.