SBL4R01J

Low Ohmic - Current Sense Resistors Type SBL Series Type SBL Series Characteristics Electrical Resistance Values (4 Watt): Resistance Values (5 Watt): Resistance Tolerance: Rated Dissipation (4 Watt): Rated Dissipation (5 Watt): Dielectric Strength: Insulation Resistance: Maximum Continuous Working Voltage: The SBL Series is a low ohmic non-inductive resistor with a low temperature coefficient in a fully insulated ceramic housing. It is ideal for applications in power supply regulation, motor control current monitoring, feedback control loops, overload sensors and radio frequency applications. The solid metal element has welded copper terminals and is encapsulated in a ceramic housing, filled with compressed silica sand. R005, R01, R015, R018, R022, R033, R047, R051 R01, R015, R018, R022, R033, R047, R051 ± 5% 4 Watts at 70°C 5 Watts at 70°C 2000 Volts < 10000 Mohms √Power x Resistance AC RMS Characteristics Mechanical Climatic Category: Temperature Range: Derating: -55 / 250 / 56 -55°C to +250°C Linear from 70°C to 250°C Characteristics Environmental Resistance to Solder Heat: Terminal Strength: Solderability: Marking: 260°C ( ∆R ± 0.2% typical) 3lb pull test Meets MIL Std 202 Black ink on ceramic body - Manufacturer, Resistance Value and Tolerance Key Features I I I I I I I 4 Watts & 5 Watts Versions Solid Metal Element Non-Inductive Low Temperature Coefficient High Reliability Custom Design (Subject to Volume) 4 Watt Device Available in Distribution Temperature Rise 150 Temperature Rise (K) 200 100 50 0 0 20 40 60 80 100 120 (%) Power Rating Dimensions How to Order SBL Common Part 4 Power Dissipation 4 - 4 Watts SBL - Standard 5 - 5 Watts R051 Resistance Value R005, R01, R015, R018, R022, R033, R047, R051 (5 Watt Version only R01 - R051) J Tolerance J ±5% F ±1% Literature No. 1773279 Issued: 04-05 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. www.tycoelectronics.com passives.tycoelectronics.com