SHCD

SHC SHCD SHCS SHCSD ■ ■ ■ .100 GRID SURFACE MOUNT COMMERCIAL/INDUSTRIAL RELAYS SHC SHCS ■ SHCD SHCSD ■ STANDARD • SENSITIVE .100 GRID SURFACE MOUNT COMMERCIAL RELAY STANDARD • SENSITIVE .100 GRID SURFACE MOUNT DIODE SUPPRESSED COMMERCIAL RELAY _ + TERMINAL VIEW TERMINAL VIEW FEATURES ■ ■ FEATURES ■ ■ ■ Hermetically sealed Excellent RF switching Suppression Diode Hermetically sealed Excellent RF switching ELECTRICAL CHARACTERISTICS CONTACT ARRANGEMENT ELECTRICAL CHARACTERISTICS COIL VOLTAGE 2 Form C (DPDT) CONTACT MATERIAL 5 to 26.5 Vdc (SHC/SHCD) 5 to 48 Vdc (SHCS/SHCSD) COIL POWER Stationary: Gold/platinum/palladium/silver alloy (gold plated) Moveable: Gold/platinum/palladium/silver alloy (gold plated) CONTACT RESISTANCE SHC/SHCD: 660 mW max. @ 25°C SHCS/SHCSD: 565 mW max. @ 25°C DUTY CYCLE Continuous PICK-UP VOLTAGE Before Life: 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life: 200 milliohms max. (measured @ 1 A @ 28 Vdc) MECHANICAL LIFE EXPECTANCY Approximately 70% of nominal coil voltage PICK-UP SENSITIVITY 1 million operations SHC/SHCD: 180 mW max. @ 25°C SHCS/SHCSD: 90 mW max. @ 25°C CONTACT RATINGS CONTACT LOAD TYPE OPERATIONS MIN. 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc Resistive 100,000 Resistive (Case not grounded) 100,000 Resistive 100,000 Inductive (0.32 Henry) 100,000 Lamp 100,000 Low Level 1,000,000 28 Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation SHC SHCD SHCS SHCSD ■ ■ ■ .100 GRID SURFACE MOUNT COMMERCIAL/INDUSTRIAL RELAYS OPERATING CHARACTERISTICS TIMING STANDARD COIL DATA NOM. COIL VOLTAGE (Vdc) COIL RESISTANCE IN OHMS ±20% @ 25°C PICKUP VOLTAGE Vdc (MAX.) @ 25°C NOM. COIL POWER (mW) @ 25°C MAX. COIL VOLTAGE COIL DESIG. OperateTime: SHC/SHCD: 4.0 ms max. SHCS/SHCSD: 6.0 ms max. ReleaseTime: SHC: 3.0 ms max. SHCS: 3.0 ms max. SHCD: 6.0 ms max. (suppression diode) SHCSD: 7.5 ms max. (suppression diode) DIELECTRIC WITHSTANDING VOLTAGE SHC/SHCD 5.0 6.0 9.0 12.0 18.0 26.5 64 98 220 400 880 1,600 100 200 400 800 1,600 3,200 6,500 11,000 3.8 4.9 7.0 9.0 14.0 18.0 3.5 4.5 6.8 9.0 13.5 18.0 24.0 32.0 391 367 368 360 368 439 250 180 203 180 203 219 199 209 5.8 8.0 12.0 16.0 24.0 32.0 7.5 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 5 6 9 12 18 26 36 48 Between Open Contacts: 350 Vrms 60 Hz Between Adjacent Contacts: 350 Vrms 60 Hz Between Contacts & Coil: 350 Vrms 60 Hz INSULATION RESISTANCE SHCS/SHCSD 5.0 6.0 9.0 12.0 18.0 26.5 36.0 48.0 1,000 megohms @ 500 Vdc ENVIRONMENTAL CHARACTERISTICS TEMPERATURE RANGE .335 (8.51) SQ MAX .378 +.030/–.020 (9.60) TYP .031 ± .003 (0.79) .035 ± .010 (0.98) REF -55°C to + 85°C WEIGHT SHC/SHCD: 0.09 oz. (2.55 gms) SHCS/SHCSD: 0.15 oz. (4.30 gms) VIBRATION RESISTANCE .280 (7.11) MAX .360 (9.14) MAX .375 (9.53) SQ MAX 2° ±2° TYP ±4° TYP .100 (2.54) TYP 8 PLS 10 G’s, 10 to 500 Hz SHOCK RESISTANCE 30 G’s, 6 ±1 ms SEMICONDUCTOR CHARACTERISTICS DIODE SHC/SHCD ENCLOSURE SHC/SHCD/SHCS/SHCSD HEADER 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage .335 (8.51) SQ MAX .410 (10.41) MIN .045 (1.14) MIN. 8 PLCS .380 (9.65) MAX .460 (11.68) MAX .410 (10.41) MIN .200 (5.08) 2° ±2° TYP .100 (2.54) 4 PLCS .200 (5.08) SHCS/SHCSD ENCLOSURE RECOMMENDED SOLDER PAD LAYOUT SPECIFYING A PART NUMBER EXAMPLE: TYPE DIODES GROUND PIN COILS SHC D X -26 29 Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation