SMD075F_1

Tyco / Electronics Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025 Phone: 800-227-4856 Fax: 800-227-4866 PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT: SMD075F DOCUMENT: SCD 25099 PCN: E60846 REV LETTER: C REV DATE: MARCH 29, 2005 PAGE NO.: 1 OF 1 Specification Status: Released Maximum Electrical Ratings Operating Voltage / Interrupt Current 30V / 40A 12V / 60A 5V / 125A Marking: C B G H D E F A Notes: 1. All metal surfaces are tin plated. 2. Devices cannot be wave soldered. 3. Drawing not to scale. TABLE I. DIMENSIONS: A MIN MAX mm: 6.73 7.98 in*: (0.265) (0.314) B MIN --C D E F G H MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN 3.18 4.8 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43 (0.125) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS** TIME TO TRIP** RESISTANCE VALUES OHMS AT 20°C MIN MAX* 0.35 1.0 TRIPPED-STATE POWER DISSIPATION** WATTS AT 20°C MAX 1.7 AMPS AT 0°C HOLD TRIP 0.84 1.68 AMPS AT 20°C HOLD TRIP 0.75 1.50 AMPS SECONDS AT AT 60°C 20°C, 8.0A HOLD TRIP MAX 0.49 0.98 0.3 * Maximum resistance is measured 1 hour after reflow. ** Values specified were determined using PCB’s with 0.070”X1.5 ounce copper traces. Agency Recognition: Reference Documents: Precedence: Effectivity: CAUTION: UL, CSA and TÜV PS300, E.N. SMD 1.0x This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant ELV Compliant Pb-Free © 2005 Tyco Electronics Corporation. All rights reserved.