SMGS

SMGS SMGSD SMGSDD ■ ■ .1 00 GRID SURFACE MOUNT HIGH-PERFORMANCE SMGS SENSITIVE .100 GRID SURFACE MOUNT HIGH-PERFORMANCE RELAY SMGSD SENSITIVE .100 GRID DIODE SUPPRESSED SURFACE MOUNT HIGH-PERFORMANCE RELAY SMGSDD SENSITIVE .100 GRID DIODE SUPPRESSED/PROTECTED SURFACE MOUNT HIGH-PERFORMANCE RELAY DESIGNED TO MIL-R-39016/41 DESIGNED TO MIL-R-39016/42 DESIGNED TO MIL-R-39016/43 X1 A2 A1 A3 B2 B1 B3 A2 A1 A3 – X2 B2 B1 A2 A1 A3 – X2 B2 B1 X2 + X1 B3 + X1 B3 TERMINAL VIEW TERMINAL VIEW TERMINAL VIEW FEATURES ■ ■ ■ ■ FEATURES ■ ■ ■ ■ ■ FEATURES ■ ■ ■ ■ ■ Hermetically sealed High shock & vibration ratings Surface mount leads Excellent RF switching Suppression diode Hermetically sealed High shock & vibration ratings Surface mount leads Excellent RF switching Suppression & protection diodes Hermetically sealed High shock & vibration ratings Surface mount leads Excellent RF switching ELECTRICAL CHARACTERISTICS CONTACT ARRANGEMENT CONTACT RATINGS CONTACT LOAD TYPE OPERATIONS MIN. 2 Form C (DPDT) CONTACT MATERIAL Stationary: Gold/platinum/palladium/silver (gold plated) Moveable: Gold/platinum/palladium/silver (gold plated) CONTACT RESISTANCE 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc 0.1 A @ 28 Vdc Resistive 100,000 Resistive (case not grounded) 100,000 Resistive 100,000 Inductive (0.32 Henry) 100,000 Lamp 100,000 Low Level 1,000,000 Intermediate Current 50,000 Before Life: 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life: 200 milliohms max. (measured @ 1 A @ 28 Vdc) MECHANICAL LIFE EXPECTANCY .378 +.030/–.020 (9.60) TYP .335 (8.51) SQ MAX .031 ± .003 (0.79) .035 ± .010 (0.98) REF 1 million operations COIL VOLTAGE 5 to 26.5 Vdc COIL POWER .375 (9.53) MAX .460 (11.68) MAX .375 (9.53) SQ MAX 565 mW max. @ 25°C DUTY CYCLE Continuous PICK-UP VOLTAGE 2° ±2° TYP ±4° TYP .100 (2.54) TYP 8 PLS Approximately 50% of nominal coil voltage PICK-UP SENSITIVITY ENCLOSURE HEADER 130 mW max. @ 25°C 22 Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation OPERATING CHARACTERISTICS TIMING ENVIRONMENTAL CHARACTERISTICS TEMPERATURE RANGE .410 (10.41) MIN .045 (1.14) MIN. 8 PLCS OperateTime: 4.0 ms max. ReleaseTime: SMGS: 2.0 ms max. SMGSD/SMGSDD: 7.5 ms max. (suppression diode, protection/suppression diodes) CONTACT BOUNCE -65°C to +125°C WEIGHT 0.09 oz. (2.55 gms) VIBRATION RESISTANCE .410 (10.41) MIN .200 (5.08) .1 00 GRID SURFACE MOUNT HIGH-PERFORMANCE 30 G’s, 10 to 3,000 Hz SHOCK RESISTANCE 75 G’s, 6 ±1 ms max. SEMICONDUCTOR CHARACTERISTICS DIODE 1.5 ms max. DIELECTRIC WITHSTANDING VOLTAGE .100 (2.54) 4 PLCS .200 (5.08) Between Open Contacts: 500 Vrms 60 Hz Between Adjacent Contacts: 500 Vrms 60 Hz Between Contacts & Coil: 500 Vrms 60 Hz INSULATION RESISTANCE 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage RECOMMENDED SOLDER PAD LAYOUT 10,000 megohms min. @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125°C) COIL DATA NOM. COIL VOLTAGE (Vdc) COIL RESISTANCE IN OHMS ±10% @ 25°C (Note) COIL CIRCUIT CURRENT mA (MAX.) (Note) COIL CIRCUIT CURRENT mA (MIN.) (Note) PICKUP VOLTAGE Vdc (MAX.) @ 25°C PICKUP VOLTAGE Vdc (MAX.) @ 125°C DROP-OUT VOLTAGE Vdc (MIN.) @ 25°C DROP-OUT VOLTAGE Vdc (MIN.) @ -65°C NOM. COIL POWER (mW) @ 25°C MAX. COIL VOLTAGE COIL DESIG. SMGS/SMGSD 5.0 100 6.0 200 9.0 400 12.0 800 18.0 1,600 26.5 3,200 36.0 6,500 48.0 11,000 SMGSDD 5.0 6.0 9.0 12.0 18.0 26.5 36.0 48.0 64 125 400 800 1,600 3,200 6,500 11,000 n/a n/a n/a n/a n/a n/a n/a n/a 78.1 48.9 23.6 16.0 12.2 9.0 6.1 4.8 n/a n/a n/a n/a n/a n/a n/a n/a 56.8 36.3 18.1 12.5 9.6 7.2 4.9 3.9 2.6 3.4 4.85 7.0 9.8 14.0 20.0 25.8 2.9 4.0 6.1 7.8 11.3 15.2 21.7 27.8 3.5 4.5 6.8 9.0 13.5 18.0 27.0 36.0 3.7 4.8 8.0 11.0 14.5 19.0 27.2 34.8 0.23 0.28 0.55 0.64 0.92 1.4 1.8 2.4 0.8 0.9 1.1 1.3 1.5 1.7 2.3 2.8 0.12 0.18 0.35 0.41 0.59 0.89 1.25 1.60 0.7 0.8 0.9 1.0 1.1 1.3 1.7 2.0 250 180 203 180 203 219 199 209 391 288 203 180 203 219 199 209 7.5 10.0 15.0 20.0 30.0 40.0 57.0 75.0 7.5 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 36 48 5 6 9 12 18 26 36 48 Note: Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25°C for 5 seconds max. SPECIFYING A PART NUMBER EXAMPLE: TYPE COILS SMGS -26 23 Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation