SR6Z

General Purpose Relays Safety Relay on DIN-rail SR6 Z I I I I I 6 pole 8 A SR6 on printed circuit board AC/DC input Spring connectors Module width 46 mm Applications Elevator control, machine control F0238-B Approvals Terminal assignment DC module, 4 NO+2 NC version E data of approved types on request Technical Contact data Contact set Rated current / limiting continuous current Rated voltage / max. switching voltage AC Maximum breaking capacity AC Contact material Minimum contact load Contact resistance Mechanical endurance Rated frequency of operation with / without load single contact, forcibly guided type A according to EN50205 8A 240 VAC / 240 VAC 2000 VA AgSnO2 10 mA / 5 V w100 mOhm / 1 A / 24 VDC w20 Ohm / 10 mA / 5 VDC 10x106 cycles 6 min-1 / 150 min-1 S0422-BA DC module, 3 NO+3 NC version Coil data DC energizing voltage Urtd 6, 12, 18, 21, 24, 36, 40, 48, 60, 115 VDC AC/DC energizing voltage Urtd 12, 21, 24, 40, 48, 60,115 VAC/VDC AC energizing voltage Urtd 230 VAC Input circuit bridge rectifier, series resistor Minimum operate voltage, % of rated coil voltage 90% Minimum release voltage (+23°C), % of rated coil voltage 10% Limiting voltage, % of rated coil voltage 110% S0422-BB DC module, 5 NO+1 NC version Insulation Surge voltage resistance coil-contacts open contact circuit adjacent contacts Clearance / creepage coil-contact adjacent contacts Insulation to IEC 60664 Voltage rating Pollution degree Overvoltage category AC/DC module, 4 NO+2 NC version 3000 Vrms 1000 Vrms 2000 Vrms W 5.5 / 5.5 mm W 3 / 3 mm 250 V 2 III AC/DC module, 3 NO+3 NC version S0422-BC AC/DC module, 5 NO+1 NC version S0422-BD S0422-BE S0422-BF 1 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Safety Relay on DIN-rail SR6 Z (Continued) Other data Flammability class according to UL 94 housing housing cage clamp terminals PCB relay base relay cover Ambient temperature Connections (according IEC) solid wire stranded wire AWG 28...14 Installation position Mounting Type of connection Relay weight Packaging unit V2 V0 V0 V0 V2 -25...+50 °C 0.2...2.5 mm2 0.2...2.5 mm2 any in rows with zero spacing spring clamp connection 90 g 2 pcs Dimensions Module width 46 mm Module length 87 mm S0423-A Fit onto mounting rails according to DIN EN 50022 or DIN EN 50035 Product key Type Contact configuration A 3 NO + 3 NC contacts B 4 NO + 2 NC contacts C 5 NO + 1 NC contacts Coil DC Coil code = rated coil voltage (e.g. 024=24VDC) AC/DC coil code: 524=24VAC/VDC, 615=115VAC/VDC AC coil code: 730=230VAC Other types on request SR6Z Product key SR6ZA024 SR6ZA524 SR6ZA615 SR6ZA730 SR6ZB024 SR6ZB524 SR6ZB615 SR6ZB730 SR6ZC024 SR6ZC524 SR6ZC615 SR6ZC730 Type 6-pole safety relay module Contact configuration 3 NO + 3 NC contacts 4 NO + 2 NC contacts 5 NO + 1 NC contacts Contact material AgSnO2 Coil 24 VDC 24 VAC/VDC 115 VAC/VDC 230 VAC 24 VDC 24 VAC/VDC 115 VAC/VDC 230 VAC 24 VDC 24 VAC/VDC 115 VAC/VDC 230 VAC Part number 7-1415033-1 9-1415059-1 0-1415060-1 1-1415060-1 5-1415033-1 2-1415060-1 6-1415046-1 3-1415060-1 3-1415042-1 4-1415060-1 5-1415060-1 6-1415060-1 2 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.