SSRK

SSRK Series Solid State Relays SSRK series 10-30A DIN Mount Solid State Relay With Paired SCR Output, Integral Heatsink File E29244 File LR246041 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to confirm the product meets the requirements for a given application. Features • • • • • • • • Narrow (22.5mm), DIN mount design with integral heatsink. Choice of 10, 20 or 30A rms inverse-parallel connected SCR output. 48 - 660VAC output. 4 -32VDC or 90 - 280Vrms input control. 4,000V rms optical isolation. Green LED input status indicator. Finger-safe (IP20) screw clamp terminals for load and control. Ground terminal. Engineering Data Form: 1 Form A (SPST-NO). Duty: Continuous. Isolation: 4,000V rms input-to-output-to-ground. Insulation Resistance: 109 Ohms, minimum, at 500VDC. Capacitance: 8.0 pf maximum (input to output). Temperature Range: Storage: –40°C to +125°C Operating: –40°C to + 80°C Case and Mounting: Refer to outline dimension drawing. Termination: Load & Control: Finger safe (IP20) screw clamps accepting wire size up to #10 AWG (3 mm). Ground: #10 screw with 5/16 in. hex/slottted head. Installation Spacing: Minimum 0.8 in (20 mm) space between units. Approximate Weight: 9.9 oz. (284 g). Ordering Information Sample Part Number 1. Basic Series: SSRK = Slim Solid State Relay with Integral Heatsink for DIN Rail Mounting 2. Line Voltage: 600 = 48 - 660 VAC 3. Input Type & Voltage: A = 90 - 280VAC D = 4 - 32VDC 4. Maximum Switching Rating/Output: 10 = 10.0A rms 20 = 20.0A rms 30 = 30.0A rms SSRK -600 A 30 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRK-600A10 SSRK-600D10 SSRK-600A20 SSRK-600D20 SSRK-600A30 SSRK-600D30 Input Specifications Parameter Control Voltage Range V IN Must Operate Voltage VIN(OP) (Min.) Must Release Voltage V IN(REL) (Min.) Input Current Range (Typ.) Conditions @ 25°C @ 25°C @ 25°C @ 25°C AC Control Units 90 - 280 Vrms 90 Vrms 10 Vrms 2 mA @ 120 Vrms, 4 mA @ 240 Vrms DC Control Units 4.0 - 32 VDC 4.0 VDC 1.0 VDC 8 - 12 mA Issued 4-09 www.tycoelectronics.com 1 Dimensions are in inches over (millimeters) unless otherwise specified. Dimensions are shown for reference purposes only. Specifications and availability subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208 1 SSRK Series Solid State Relays Output Specifications (@ 25° C, unless otherwise specified) Parameter Load Voltage Range VL Repetitive Blocking Voltage (Min.) Load Current Range I L * Single Cycle Surge Current (Min.) Leakage Current (Off-State) (Max.) On-State Voltage Drop (Max.) Static dv/dt (Off-State) (Min.) Turn-On Time (Max.) Turn-Off Time (Max.) I t Rating (Max.) Load Power Factor Rating (Min,) *See Thermal Derating Curves. 2 Conditions f = 47-63 Hz. Units V rms V peak A rms A peak 10A Rated Units 48-660 ±1200 0.15 - 10.0 120 1.0 1.6 500 20A Rated Units 48-660 ±1200 0.15 - 20.0 250 1.0 1.6 500 30A Rated Units 48-660 ±1200 0.15 - 30.0 625 1.0 1.6 500 f = 60 Hz. VL = 600Vrms I L = Max. V L = Max. f = 60 Hz. f = 60 Hz. t = 8.3 ms I L = Max. mA rms V peak V/µs ms ms A2 Sec. 8.3 60 0.5 8.3 for Zero Voltage Turn-On Models 0.02 for Random Voltage Turn-On Models 8.3 260 0.5 8.3 1,620 0.5 Electrical Characteristics (Thermal Derating Curves) 30 30A Rated Units Ouput Current (Arms) Outline Dimensions MOUNTING HOLE 0.17 (4.3) DIA. 25 +3/A1 4/A2 TU S 20 20A Rated Units 15 10 10A Rated Units U T ST A 3.5 (88.9) 3.2 (81.9) 2.6 (66.0) INP OUTPUT 5 1/L1 2/T1 0 0 20 40 60 Ambient Temperature (°C) 80 .5 (12.7) .890 (22.5) MOUNTING SLOT 0.17 x 0.20 (4.3 x 5.1) 3.2 (81.3) 3.9 (99.0) Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this document, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult Tyco Electronics for the latest dimensions and design specifications. BLACK ANODIZED ALUMINUM HEATSINK Recommended Torque Range for Terminal Screws: 5 - 6 in lb (0.6 - 0.7 Nm). © 2009 by Tyco Electronics Corporation. All Rights Reserved. TE logo and Tyco Electronics are trademarks. Catalog 8-1773454-4 Issued 4-09 Dimensions are in inches over (millimeters) unless otherwise specified. Dimensions are shown for reference purposes only. Specifications and availability subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208 2 www.tycoelectronics.com