SiBar Thyristor Surge Protectors TVBxxxRSC-L Series
Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction. These devices have a high electrical surge capability to help protect against transient faults and a high off-state impedance, rendering them virtually transparent during normal system operation. SiBar thyristor surge protectors are designed to assist telecommunication and computer telephony equipment in meeting the applicable requirements and industry specifications.
Benefits:
• Helps provide protection for sensitive telecom electronic equipment • Low capacitance • Low leakage current • Low power dissipation • Fast, reliable operation • No wear-out mechanisms • Helps designers meet worldwide telecom standards • Helps reduce warranty and service costs • Easy installation • Helps improve power efficiency of equipment
Features:
• RoHS compliant available on all parts • Bidirectional crowbar transient voltage protection • Broad voltage range 6V – 400V • Low capactiance 20pF-45pF @ 50V • High off-state impedance • Low on-state voltage • High surge capability • Short-circuit failure mode • Surface-mount technology • DO-214AA SMB package • 10 x 1000 μs 100A surge rating • Helps equipment comply with TIA-968, Telcordia GR-1089, IEC61000-4-5, ITU K.20/21/45
Applications:
• Central Office Equipment • Analog and digital linecards (xDSL, T1/E1...) • Phones, answering machines • PBX systems • Set top boxes • POS systems • Fax Machines
Document: SCD 27173
SiBar Thyristor Surge Protectors
© 2007 Tyco Electronics Corporation. All rights Reserved. 1
Status: Released Rev: B Date: December 12, 2007
SiBar Thyristor Surge Protectors TVBxxxRSC-L Series
Table SB1 - Electrical Characteristics
Part Number TVB006RSC-L TVB025RSC-L TVB035RSC-L TVB065RSC-L TVB090RSC-L TVB120RSC-L TVB140RSC-L TVB170RSC-L TVB190RSC-L TVB220RSC-L TVB270RSC-L TVB300RSC-L TVB360RSC-L TVB400RSC-L VDM Max. (V) 6 25 35 65 90 120 140 170 190 220 275 320 360 400 VBO Max. (V) 25 40 55 88 125 160 180 220 260 295 350 400 460 540 IH Min. (mA) 50 (typ) 150 150 150 150 150 150 150 150 150 150 150 150 150 VT Max. (V) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 C1 (Typ) @ 50VDC Bias (pF) ------45 40 35 30 30 30 30 30 25 25 20 C2 (Typ) @ 2VDC Bias (pF) 75 65 55 90 80 75 65 60 60 60 60 50 50 45 Off-State Current @VDM (μA) 5 5 5 5 5 5 5 5 5 5 5 5 5 5
Notes: All electrical characteristics are measured at 25°C. VDM measured per UL497B pulse requirements: at max. off-state leakage current (IDM) = 5 µA. VBO measured at 100V/µs.
Table SB2 – Surge Current Rating
TIA-968 Type A Part Number TVBxxxRSC-L Ipp(A) 5 x 320 µs 150 Type B Ipp(A) pp (A) 10 x 560 µs 10 x 160 µs 140 200 Ipp (A) Ipp (A) 10 x 1000 µs 2 x 10 µs 100 500 Ipp (A) 8 x 20 µs 400 ITSM IPP (A) di/dt dV/dt 5 x 310 μs Min. (A/µs) (V/µs) (VOC: 10 x 700μs) (A) 150 41 500 2000 Telcordia GR-1089* IEC61000-4-5 ITU K.20/21/45*
Notes: *Lightning current wave forms for applicable industry specification. ITSM, peak on-state surge current is measured at 60 Hz, one cycle. di/dt: critical rate-of-rise of on-state current (pulsed power amplifier Vmax = 600V; C = 30µF). dV/dt: critical rate-of-rise of off-stage voltage (linear wave form, VD = rated VBO, Tj = 25°C)
Document: SCD 27173
SiBar Thyristor Surge Protectors
© 2007 Tyco Electronics Corporation. All rights Reserved. 2
Status: Released Rev: B Date: December 12, 2007
SiBar Thyristor Surge Protectors TVBxxxRSC-L Series
Table SB3 – Dimensions in Millimeters
A Dimension TVBxxxRSC-L Min. 4.06 (0.160) H Dimension TVBxxxRSC-L Min. 0.051 (0.002) Max. 0.200 (0.008) Min. 0.150 (0.006) Max. 4.57 (0.180) Min. 3.30 (0.130) J Max. 0.31 (0.012) Min. 0.76 (0.030) B Max. 3.94 (0.155) Min. 1.90 (0.075) K Max. 1.27 (0.050) C Max. 2.41 (0.095) P Ref 0.51 (0.202) Min 5.21 (0.205) Min. 1.95 (0.077) S Max. 5.59 (0.220) D Max. 2.20 (0.086)
Notes: *D dimension is measured within dimension P. TVB series devices use industry standard SMB package type. All devices are bidirectional and may be oriented in either direction for installation
Table SB4 – Physical Characteristics and Environmental Specifications
Lead material Encapsulating material Solderability Solder heat withstand Solvent resistance Mechanical shock Vibration Storage temperature (°C) Operating temperature (°C) Junction temperature (°C) Matte tin finish (-L devices) Epoxy, meets UL94V-0 requirements per MIL-STD-750, Method 2026 per MIL-STD-750, Method 2031 per MIL-STD-750, Method 1022 per MIL-STD-750, Method 2016 per MIL-STD-750, Method 2056 -55 to 150 -40 to 125 150
Maximum Lead Temperature for Soldering Purpose; for 10s (°C) 260
Table SB5 – Reliability Tests
Test High temperature, reverse bias High humidity, high temperature, reverse bias High temperature storage life Temperature cycling Autoclave Conditions +100°C, 50VDC bias 85% RH, +85°C, 50VDC bias +150°C -65°C to +150°C, 15 minute dwell 100% RH, +121°C, 15 PSI Duration 1000 hours 1000 hours 1000 hours 1000 cycles 96 hours
Document: SCD 27173
SiBar Thyristor Surge Protectors
© 2007 Tyco Electronics Corporation. All rights Reserved. 3
Status: Released Rev: B Date: December 12, 2007
SiBar Thyristor Surge Protectors TVBxxxRSC-L Series
Document: SCD 27173
SiBar Thyristor Surge Protectors
© 2007 Tyco Electronics Corporation. All rights Reserved. 4
Status: Released Rev: B Date: December 12, 2007
SiBar Thyristor Surge Protectors TVBxxxRSC-L Series
Table SB6 – Packaging and Marking Information
Recommended Pad Layout (millimeters/inchs) Part Description TVB006RSC-L TVB025RSC-L TVB035RSC-L TVB065RSC-L TVB090RSC-L TVB120RSC-L TVB140RSC-L TVB170RSC-L TVB190RSC-L TVB220RSC-L TVB270RSC-L TVB300RSC-L TVB360RSC-L TVB400RSC-L Tape and Reel Standard Quantity Package 2,500 10,000 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 Part Marking 06RC 25RC 35RC 65RC 90RC 12RC 14RC 17RC 19RC 22RC 27RC 30RC 36RC 40RC Dimension A (Nom.) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) Dimension B (Nom.) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) Dimension C (Nom.) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) Agency Recognition* UL UL UL UL UL UL UL UL UL UL UL UL UL UL
*UL497B, File # E179610
308 Constitution Drive, MS R21/2A Menlo Park, CA USA 94025-1164
Tel (800) 227-7040 (650) 361-6900 Fax (650) 361-2508
www.circuitproection.com www.circuitprotection.com.hk (Chinese) www.circuitprotection.jp (Japanese)
Raychem, PolySwitch, SiBar, TE Logo and Tyco Electronics are trademarks. All other trademarks and copyrights are property of their respective owners. Document: SCD 27173
SiBar Thyristor Surge Protectors
© 2007 Tyco Electronics Corporation. All rights Reserved. 5
Status: Released Rev: B Date: December 12, 2007
