TVB275NSA-L

SiBar Thyristor Surge Protectors TVBxxxNSA-L Series Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction. These devices have a high electrical surge capability to help protect against transient faults and a high off-state impedance, rendering them virtually transparent during normal system operation. SiBar thyristor surge protectors are designed to assist telecommunication and computer telephony equipment in meeting the applicable requirements and industry specifications. Benefits: Features: • RoHS compliant • Helps provide protection for sensitive telecom electronic equipment • Low leakage current • Low power dissipation • Fast, reliable operation • No wear-out mechanisms • Helps designers meet worldwide telecom standards • Helps reduce warranty and service costs • Easy installation • Helps improve power efficiency of equipment • Bidirectional crowbar transient voltage protection • Broad voltage range 58V – 320V with improved Vdrm/Vbo voltage range • High off-state impedance • Low on-state voltage • High surge capability • Short-circuit failure mode • Surface-mount technology • DO-214AA SMB package • 10 x 1000 μs 50A surge rating • Helps equipment comply with TIA-968, Telcordia GR-1089, IEC61000-4-5, ITU K.20/21/45 Applications: • Modems • Fax machines • Set top boxes • POS systems • Phones, answering machines • Analog and digital linecards (xDSL, T1/E1...) • PBX systems • Other customer premise and central office network equipment requiring protection Document: SCD 27218 SiBar Thyristor Surge Protectors © 2007 Tyco Electronics Corporation. All rights Reserved. 1 Status: Released Rev: B Date: DECEMBER 12, 2007 SiBar Thyristor Surge Protectors TVBxxxNSA-L Series Table SB1 - Electrical Characteristics Part Number TVB058NSA-L TVB065NSA-L TVB075NSA-L TVB090NSA-L TVB120NSA-L TVB140NSA-L TVB170NSA-L TVB180NSA-L TVB190NSA-L TVB220NSA-L TVB275NSA-L TVB320NSA-L VDM Max. (V) 58 65 75 90 120 140 170 180 190 220 275 320 VBO Max. (V) 77 88 98 130 160 180 220 240 260 300 350 400 IH Min. (mA) 150 150 150 150 150 150 150 150 150 150 150 150 VT Max. (V) 4 4 4 4 4 4 4 4 4 4 4 4 C1 (Typ) 50VDC Bias 44 41 34 31 24 23 20 19 19 17 15 14 C2 (Typ) 2VDC Bias 84 79 65 58 46 44 39 37 36 33 31 27 Off-State Current VD2=VDM (μA) 5 5 5 5 5 5 5 5 5 5 5 5 Notes: All electrical characteristics are measured at 25°C. VDM measured per UL497B pulse requirements: at max. off-state leakage current (IDM) = 5 µA. VBO measured at 100V/µs. C1 measured at 1 MHz with a 50 VDC bias. C2 measured at 1MHz with a 2VDC bias. Table SB2 – Surge Current Rating TIA-968 Type A Part Number TVBxxxNSA-L Ipp(A) 5 x 320 µs 90 Type B Ipp(A) pp (A) 10 x 560 µs 10 x 160 µs 70 100 Ipp (A) Ipp (A) 10 x 1000 µs 2 x 10 µs 50 150 Ipp (A) 8 x 20 µs 150 ITSM IPP (A) di/dt dV/dt 5 x 310 μs Min. (A/µs) (V/µs) (VOC: 10 x 700μs) (A) 90 22 500 2000 Telcordia GR-1089* IEC61000-4-5 ITU K.20/21/45* Notes: *Lightning current wave forms for applicable industry specification. ITSM, peak on-state surge current is measured at 60 Hz, one cycle. di/dt: critical rate-of-rise of on-state current (pulsed power amplifier Vmax = 600V; C = 30µF). dV/dt: critical rate-of-rise of off-stage voltage (linear wave form, VD = rated VBO, Tj = 25°C Document: SCD 27218 SiBar Thyristor Surge Protectors © 2007 Tyco Electronics Corporation. All rights Reserved. 2 Status: Released Rev: B Date: DECEMBER 12, 2007 SiBar Thyristor Surge Protectors TVBxxxNSA-L Series Table SB3 – Dimensions in Millimeters A Dimension TVBxxxNSA-L Min. 4.06 (0.160) H Dimension TVBxxxNSA-L Min. 0.051 (0.002) Max. 0.200 (0.008) Min. 0.150 (0.006) Max. 4.57 (0.180) Min. 3.30 (0.130) J Max. 0.31 (0.012) Min. 0.76 (0.030) B Max. 3.94 (0.155) Min. 1.90 (0.075) K Max. 1.27 (0.050) C Max. 2.41 (0.095) P Ref 0.51 (0.202) Min 5.21 (0.205) Min. 1.95 (0.077) S Max. 5.59 (0.220) D Max. 2.20 (0.087) Notes: *D dimension is measured within dimension P. TVB series devices use industry standard SMB package type. All devices are bidirectional and may be oriented in either direction for installation Table SB4 – Physical Characteristics and Environmental Specifications Lead material Encapsulating material Solderability Solder heat withstand Solvent resistance Mechanical shock Vibration Storage temperature (°C) Operating temperature (°C) Junction temperature (°C) Matte tin finish (-L devices) Epoxy, meets UL94V-0 requirements per MIL-STD-750, Method 2026 per MIL-STD-750, Method 2031 per MIL-STD-750, Method 1022 per MIL-STD-750, Method 2016 per MIL-STD-750, Method 2056 -55 to 150 -40 to 125 175 Maximum Lead Temperature for Soldering Purpose; for 10s (°C) 260 Table SB5 – Reliability Tests Test High temperature, reverse bias High humidity, high temperature, reverse bias High temperature storage life Temperature cycling Autoclave Conditions +100°C, 50VDC bias 85% RH, +85°C, 50VDC bias +150°C -65°C to +150°C, 15 minute dwell 100% RH, +121°C, 15 PSI Duration 1000 hours 1000 hours 1000 hours 1000 cycles 96 hours Document: SCD 27218 SiBar Thyristor Surge Protectors © 2007 Tyco Electronics Corporation. All rights Reserved. 3 Status: Released Rev: B Date: DECEMBER 12, 2007 SiBar Thyristor Surge Protectors TVBxxxNSA-L Series Document: SCD 27218 SiBar Thyristor Surge Protectors © 2007 Tyco Electronics Corporation. All rights Reserved. 4 Status: Released Rev: B Date: DECEMBER 12, 2007 SiBar Thyristor Surge Protectors TVBxxxNSA-L Series Table SB6 – Packaging and Marking Information Recommended Pad Layout (millimeters/inchs) Part Description TVB058NSA-L TVB065NSA-L TVB075NSA-L TVB090NSA-L TVB120NSA-L TVB140NSA-L TVB170NSA-L TVB180NSA-L TVB190NSA-L TVB220NSA-L TVB275NSA-L TVB320NSA-L Tape and Reel Quantity 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 2,500 Standard Package 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 Part Marking 58NA 65NA 75NA 90NA 12NA 14NA 17NA 18NA 19NA 22NA 27NA 32NA Dimension A (Nom.) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) 2.261 (0.089) Dimension B (Nom.) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) 2.159 (0.085) Dimension C (Nom.) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) 2.743 (0.108) Agency Recognition* UL UL UL UL UL UL UL UL UL UL UL UL * UL497B, File # E179610 308 Constitution Drive, MS R21/2A Menlo Park, CA USA 94025-1164 Tel (800) 227-7040 (650) 361-6900 Fax (650) 361-2508 www.circuitproection.com www.circuitprotection.com.hk (Chinese) www.circuitprotection.jp (Japanese) Raychem, PolySwitch, SiBar, TE Logo and Tyco Electronics are trademarks. All other trademarks and copyrights are property of their respective owners. Document: SCD 27218 SiBar Thyristor Surge Protectors © 2007 Tyco Electronics Corporation. All rights Reserved. 5 Status: Released Rev: B Date: DECEMBER 12, 2007