VLR230F

PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com PRODUCT: VLR230F DOCUMENT: SCD 25580 PCN: D03587 REV LETTER: C REV DATE: JUNE 25, 2007 PAGE NO.: 1 OF 1 Overcurrent Protection Device Raychem Circuit Protection Products Specification Status: Released Maximum Electrical Rating Operating Voltage: 12Vdc Interrupt Current: 100A Chip Size: 5 X 12mm Leads: Nickel 1/4H 0.125mm nominal thickness Solder: Lead-free Tape: Polyester (White) 13 mm nominal width Marking: (Color: Green) Manufacturer's Mark R23 Part Identification Lot Identification TABLE I. DIMENSIONS: A B MIN MAX MIN MAX 20.9 23.1 4.9 5.3 (0.82) (0.91) (0.19) (0.21) *Rounded off approximation C MIN ---MAX 0.8 (0.03) MIN 4.1 (0.16) D MAX 5.8 (0.23) MIN 4.1 (0.16) E MAX 5.8 (0.23) MIN 3.9 (0.15) F MAX 4.1 (0.16) mm: in*: TABLE II. PERFORMANCE RATINGS: As measured in Mueller Kelvin Clips model BU-75K. I HOLD CURRENT TRIP LIMITS TIME TO TRIP REFERENCE RESISTANCE ONE-HOUR POST-TRIP RESISTANCE OHMS AT 25°C TYP MAX 0.031 0.036 TRIPPEDSTATE POWER DISSIPATION WATTS AT 25°C, 12V TYP MAX 1.4 2.5 AMPS 25°C HOLD 2.3 AMPS AMPS AMPS AMPS SECONDS AT OHMS AT 0°C AT 25°C AT 60°C AT --°C 25°C, 10.0A AT 25°C HOLD TRIP HOLD TRIP HOLD TRIP HOLD TRIP TYP MAX MIN MAX 3.4 6.6 2.3 5.0 0.9 2.3 ----2.4 5 0.012 0.018 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: UL, TUV, CSA PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information: ROHS Compliant ELV Compliant Pb-Free © 2005, 2007 Tyco Electronics Corporation. All rights reserved.