J52-4111-002

J52 Refrigerant Level Switches DESCRIPTION The Magnetrol Model J52 refrigerant level switches are float actuated units designed for use on liquids with 0.60 specific gravity and above. They utilize the Magnetrol magnetic principle to assure dependable performance. FEATURES • Temperatures from -50° to +100° F (-46° to +38° C) • Maximum working pressure to 400 psig (28 bar) • Housing is completely sealed against entrance of moisture, preventing internal frost formation • Conduit seal with 24-inch (610 mm) lead wires prevents entrance of moisture laden air into the switch housing • Float chamber is a welded assembly fabricated from two low carbon steel sections and finished with an epoxy coating • High and low level switch actuation is easily field adjustable between 0.50 and 1.50 inches (13 and 38 mm), factory set for 1.50 • Vibration resistant switch mechanism has been specifically developed to provide reliable and trouble free operation • Housing cover seal of Viton® A o-ring is used between housing cover and base to provide an air tight seal • Housing base can be rotated 360° • Baffle plate provided with the switch mechanism to prevent electrical wiring interference • Housing choices of TYPE 4X steel, TYPE 4X/7/9 explosion proof, and TYPE 4 transparent Lexan® • Used with most commercial refrigerants including ammonia, freon, methyl chloride and sulphur dioxide • Optional cryogenic insulation available. See bulletin 41-106. AGENCY Agency CSA FM J52-41X1-00X J52-41X2-00X J52-41XX-00X J52-41X2-00X APPROVALS Non-Hazardous TYPE 4X Non-Hazardous TYPE 4X Class I, Div. 1, Groups C & D Class II, Div. 1 Groups E, F & G Model Number Approval Models available for quick shipment, usually within one week after factory receipt of a complete purchase order, through the Expedite Ship Plan (ESP). MODEL Housing TYPE 4X TYPE 4 Lexan TYPE 4X/7/9 SELECTION Connection 3 ⁄4" NPT ⁄4" Socket Weld J52-4101-002 J52-4111-002 J52-4107-004 — J52-4102-002 J52-4112-002 3 Switch Dry Contact Dry Contact Dry Contact TECHNOLOGY A permanent magnet Œ is attached to a pivoted switch actuator and adjustment screw . As the float Ž rises following the liquid level, it raises the attraction sleeve  into the field of the magnet, which then snaps against the non-magnetic enclosing tube , actuating the switch ‘. The enclosing tube provides a static pressure boundary between the switch mechanism and the process. On falling level, a spring retracts the magnet, deactivating the switch. 2 5 6 4 1 3 Pivot Return Spring Process Liquid Process Liquid Rising Level Falling Level SPECIFICATIONS Inches (mm) Rotation Clearance TYPE 4X — 4.25 (108) TYPE 4X/7/9 — 6.00 (152) 1/2" NPT Conduit Connection may be rotated through 360° 24.00 (610) Long wires furnished Basic Electrical Ratings Voltage Dry Contact Non-inductive Ampere Rating 15.00 15.00 6.00 0.50 0.25 120 VAC 240 VAC 24 VDC 120 VDC 240 VDC 15.00 (381) 10.00 3/4" NPT (254) 3/4" Socket weld RISING LEVEL R L FALLING LEVEL 5.75 (146) Actuating Levels R L Liquid Specific Gravity 0.60 0.80 1.00 1.20 1.30 1.40 1.50 1.60 1.70 1.00 1.44 1.69 1.88 1.94 2.00 2.06 2.13 2.13 (25) (37) (43) (48) (49) (51) (52) (54) (54) 2.38 2.63 2.81 2.94 3.00 3.06 3.06 3.13 3.13 (60) (69) (71) (75) (76) (78) (78) (80) (80) NOTE: Actuating levels are factory set for maximum differential between switch actuation. Internal adjustment provided for reduced differential. Levels ±0.25" (6 mm) 3/4" NPT 3/4" Socket weld 2.81 (71) 4.25 (108) WARRANTY All Magnetrol mechanical level and flow controls are warranted free of defects in materials or workmanship for five full years from the date of original factory shipment. If returned within the warranty period; and, upon factory inspection of the control, the cause of the claim is determined to be covered under the warranty; then, Magnetrol will repair or replace the control at no cost to the purchaser (or owner) other than transportation. Magnetrol shall not be liable for misapplication, labor claims, direct or consequential damage or expense arising from the installation or use of equipment. There are no other warranties expressed or implied, except special written warranties covering some Magnetrol products. 5300 Belmont Road • Downers Grove, Illinois 60515-4499 • 630-969-4000 • Fax 630-969-9489 • www.magnetrol.com 145 Jardin Drive, Units 1 & 2 • Concord, Ontario Canada L4K 1X7 • 905-738-9600 • Fax 905-738-1306 Heikensstraat 6 • B 9240 Zele, Belgium • 052 45.11.11 • Fax 052 45.09.93 Regent Business Ctr., Jubilee Rd. • Burgess Hill, Sussex RH15 9TL U.K. • 01444-871313 • Fax 01444-871317 Copyright © 2011 Magnetrol International, Incorporated. All rights reserved. Printed in the USA. Performance specifications are effective with date of issue and are subject to change without notice. Magnetrol & Magnetrol logotype are registered trademarks of Magnetrol International. Viton® is a registered trademark of DuPont Performance Elastomers. Lexan® is a registered trademark of General Electric. BULLETIN: 46-122.7 EFFECTIVE: August 2010 SUPERSEDES: April 2009