LSSHS-502-D-04-T-LF

8 7 6 4 5 2 3 1 Recommended P.C. Board Layout SCALE 6:1 Pin 1 Pin 1 F F .181 [4.60] .050[1.27] .028[0.70] .031 [0.79] Single (S) APPLICATION Single (M) .071 [1.80] E .220 [5.60] .028 [0.71] .026[0.65] Pin 1 Pin 1 04 Bottom Entry D E LSSHS-5 XX - X - XX - X - X - XXX - XX - X - XX - LF (A) (B) (C ) (D) (E) (F) (G) (H) (I) (J) 06 Top Entry Point of Contact .024[0.60] A. Pins Per Row - 1 through 40 B. Row Specification - S= Single Row - D= Double Row C. Surface Mount - 04 Bottom Entry - 06 Top Entry D. Plating Options - See Plating Options below E. Footprint Orientation (Single Row) - S= Pin 1 right - M= Pin 1 left F. Polarized Position - Leave blank if not needed - If required, specify empty pin position - e.g. 012 for Pin 12 G. Packing Information -TR= Tape and Reel -TB= Tube H. Cap Option - P= Pick and Place Cap - O= No Cap I. Alignment Pin Option - Leave blank if not needed - Ap= With J. Lead Free .050[1.27]X No. of Positions + .012[0.30] .071 [1.80] 01 C .087 [2.20] 40 .050[1.27] .077 [1.95] .016[0.40] X .006[0.15] SINGLE ROW (S) D C .050[1.27]X No. of Spaces - .050[1.27] .010[0.25] Plating options G 10µ Gold on Contact Area/ Flash on Tail F Gold Flash over Entire Pin H 30µ Gold on Contact Area/ Matte Tin on Tail .142[3.60] 01 Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 300V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +125°C Max. Process Temperature Peak: 260°C up to 20 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Manual Solder: 350°C up to 5 secs. 40 B SINGLE ROW (M) 80 .084 [2.15] .050 .118 [1.27] [3.00] 79 01 UNLESS OTHERWISE SPECIFIED: .177[4.49] A .050[1.27]X No. of Positions - .100[2.54] DOUBLE ROW PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 8 Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. .027 [0.71] .035[0.90] Materials: Contact Material: Phosphor Bronze Insulator Material: High Temperature LCP Plastic Plating: Au over Ni 02 .079 [2.00] B 7 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 04/13/16 CHECKED GWE 04/13/16 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: LSSHS-5 SERIES SIZE DWG. NO. REV G C SCALE 12:1 SHEET 1 OF 1 1