LSWSS-102-S-02-T-LF

8 7 6 4 5 2 3 SINGLE (02) ROW Recommended P.C. Board Layout SCALE 4:1 Pin 1 F .125 [3.18] .210 [5.33] .100[2.54] .100[2.54] SINGLE ROW SINGLE (S) ROW Pin 1 Pin 1 .040 [1.02] 1 .040[1.02] .125 [3.18] F .210 [5.33] .100[2.54] SINGLE (M) ROW .040[1.02] SINGLE (S) ROW SINGLE (M) ROW APPLICATION Max. Insertion Depth .115[2.92] E LSWSS-1 XX - S - XX - XX - XXX - X - XX - X - LF (A) (B) (C ) (D) (E) (F) (G) (H) (I) Point of Contact .050[1.27] .100[2.54]X No. of Positions+.020[0.50] D .098 [2.50] .180 [4.57] 01 40 SINGLE (02) ROW .100[2.54] .016[0.38] X .025[0.64] .120 [3.05] A. Pins Per Row - 1 through 50 B. Row Specification - S= Single Row C. Pin Options - See Pin Options below D. Plating Options - See Plating Options below E. Polarized Position - Leave blank if not needed - If required, specify empty pin position - e.g. 012 for Pin 12 F. Footprint - See data sheet - S= Pin 1 left - M= Pin 1 right G. Packing Information - TR= Tape and Reel - TB= Tube H. Pad - P= Plastic - K= Kapton - O= No Pad I. Lead Free G T GT H F FT .100[2.54]X No. of Spaces C SINGLE (M) ROW .220 [5.59] B SINGLE (S) ROW .186[4.72] 01 Plating options -10µ Gold on Contact Area/ Flash on Tail -Matte Tin all Over -10µ Gold on Contact Area/ Matte Tin on Tail -30µ Gold on Contact Area/ Matte Tin on Tail -Gold Flash over Entire Pin - Gold Flash on Contact Area/ Matte Tin on Tail TSHCR TSHCRE TSHCRSM TSHR TSHRE TSHS TSHSCM TSHSM UTLSHSM ULTSHC ULTSHCR Pin Style Thru hole Surfce Mount D C 02 04 Specifications: Insertion Depth: .085[2.16mm] to .115[2.92mm] Insertion Force- Per Contact: 12oz. avg [3.34N] with .025[0.64mm] sq. pin Withdrawal Force- Per Contact: 6oz. avg [1.67N] with .025[0.64mm] sq. pin Current Rating: 3.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 600V AC Contact Resistance: 10M Ohms Max. for 02 option, 20M Ohms Max. for Surface Mount Option Operation Temperature: -40°C to +105°C Max. Process Temperature Peak: 260°C up to 20 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Reflow (only for Surface Mount): 260°C up to 10 secs. Manual Solder: 350°C up to 5 secs. 40 01 Mates with: BSTC BSTCM BSTCR BSTCRSM BSTS LBSTCM LTSHCR LTSHCRE LTSHR LTSHRE LTSHSM TSHC E B Materials: Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Plating: Au or Sn over 50µ” (1.27) Ni 40 Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. UNLESS OTHERWISE SPECIFIED: A PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 8 7 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 01/19/15 CHECKED GWE 01/19/15 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com TITLE: LSWSS-1-S SERIES SIZE DWG. NO. REV C D SCALE 8:1 DO NOT SCALE DRAWING 2 SHEET 1 OF 1 1