LTSHSM-502-D-02-T-V-LF

8 7 6 Recommended P.C. Board Layout Pin 1 Pin 1 2 3 Single (S) .050 [1.27] x No. of Positions - .100 [2.54] .008 [0.2] SCALE 6:1 F 4 5 1 Single (M) 0.64 .025 Pin 1 F 0.84 .033 .236 [6.00] 6.70 .264 2.60 .102 .050[1.27] 3 .118 .026[0.65] .050[1.27] Single (S) .026[0.65] Double Single (M) LTSHSM-5 XX - X - XX - XX - V - XXX - X - XX - X - XX - LF (A) (B) (C ) (D) (E) (F) (G) (H) (I) (J) (K) E A. Pins Per Row - 1 through 40 B. Row Specification - S= Single Row - D= Double Row C. Pin Options - See Pin Options below D. Plating Options - See Plating Options below E. Vertical F. Polarized Position - Leave blank if not needed - If required, specify empty pin position - e.g. 012 for Pin 12 G. Footprint option(only for single row) - S= Pin 1 left - M= Pin 1 right H. Packing Information - TR= Tape and Reel - TB= Tube I. Pad - P= Plastic - O= No Pad - If left blank packaging left to MLE's discretion Pad may be metal, mylar or plastic J. Alignment Pin Option ( Only for Double Row) - Leave bank if not needed. - AP=With K. Lead Free .050[1.27]X No. of Positions .009[0.22] .079 [2.00] 40 01 D .050[1.27] POST HEIGHT .059 [1.50] .016[0.40] Sq. Single (S) .039[1.00] APPLICATION .050[1.27]X No. of Spaces .197 [5.00] C 40 G T GT H F FT 01 Single (M) B 02 80 Plating options -10µ Gold on Contact Area/ Flash on Tail -Matte Tin all Over -10µ Gold on Contact Area/ Matte Tin on Tail -30µ Gold on Contact Area/ Matte Tin on Tail -Gold Flash over Entire Pin - Gold Flash on Contact Area/ Matte Tin on Tail UNLESS OTHERWISE SPECIFIED: Double .224 [5.70] PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 7 B Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. .028 [0.70] 8 C Tails may be clipped to acheive specific dimensions. 79 .039[1.50] A Pin Options Post Height 01 0.150 3.81 02 0.065 1.65 04 0.075 1.91 06 0.120 3.05 Materials: Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Plating: Au or Sn over 50µ” (1.27) Ni .050 .134 [1.27] [3.40] 01 D Mates with: LSSHS SMSS SSHS Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 300V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C Max. Process Temperature Peak: 260°C up to 10 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Reflow: 260°C up to 10 secs. Manual Solder: 350°C up to 5 secs. .050 [1.27] x No. of Positions - .100 [2.54] .008 [0.2] E 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 08/29/16 CHECKED GWE 08/29/16 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: LTSHSM-5-V SERIES SIZE DWG. NO. REV G C SCALE 12:1 SHEET 1 OF 1 1