MICRO-03-02-2-LF

8 7 6 4 5 2 3 1 F Recommended P.C. Board Layout F SCALE 8:1 .053[1.35] Point of Contact .016[0.41] .100[2.54] .071[1.80] .050[1.27] E .031[0.80] A 0.30[7.62] C 0.20[5.08] .071 [1.80] E MICRO - 03 - XX - X - LF (A) (B) (C) D .157[4.00] 0.15[3.56] .075 [1.90] .098 .154[3.90] [2.50] 0.10[2.54] .138 [3.50] .140[3.55] 0.25[6.35] .024[0.60] x .010[0.25] D A. Pins Per Row - 2 through 10 B. Locking Type - 2= Without Latch (Standard) - 1= With Latch C. Lead Free Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Withstanding Voltage: 500V AC/DC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C .197[5.00] 0.15[3.56] .050[1.27] Without Latch Version Mates With: MICRO-05 (Wire Board) MICRO-06 (Baord to Board) MICRO-07 (Board to Board) Materials: Contact Material: Phosphor Bronze Insulator Material: High Temperature Plastic PA46 (UL94V-0), Red Contact Plating: Sn Over Ni Packing: Tube without Pick and Place pad C .100[2.54] 0.15[3.56] C Termination: PCB Polarized by PCB cutout Polarization acheived by peg on male connector and hole in PCB. Orientation of connector on PCB is irrelevant. B With Latch Version Wihout Latch Version Dimension Dimension Pins Per Row A B C Qt'y/ Tube Pins Per Row A B C Qt'y/ Tube 2 9.70 3.81 5.60 59 2 7.00 3.81 5.60 82 3 12.24 6.35 8.14 47 3 9.54 6.35 8.14 60 4 14.78 8.89 10.68 39 4 12.08 8.89 10.68 48 5 17.32 11.43 13.22 33 5 14.62 11.43 13.22 39 6 19.86 13.97 15.76 29 6 17.16 13.97 15.76 33 7 22.40 16.51 18.30 25 7 19.70 16.51 18.30 29 8 24.94 19.05 20.84 23 8 22.24 19.05 20.84 26 9 27.48 21.59 23.38 21 9 24.78 21.59 23.38 23 10 30.02 24.13 25.92 19 10 27.32 24.13 25.92 21 0.20[5.08] B .154[3.90] 0.10[2.54] Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. With Latch Version Provides Latched Connection In Wire To Board Application With Micro-05 Cable Connector A UNLESS OTHERWISE SPECIFIED: PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 8 7 6 5 B 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 01/22/15 CHECKED GWE 01/22/15 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: MICRO-03 Series SIZE DWG. NO. REV B C SCALE 8:1 SHEET 1 OF 1 1