PCI-708-D-02-F-TR-P-LF

8 7 6 4 5 2 3 1 Recommended P.C. Board Layout SCALE 4:1 F F Alignment Pin .039[1.00]X No. of Positions + .127[3.24] .279 [7.20] .074 [1.88] .039[1.00] .023[0.60] .063 [1.50] Lock Pin .047 [1.20] Alignment Pin Lock Clip Option E E Alignment Pin Option Lock Pin Option PCI-7 XX - D - 02 - XX - XX - X - XX - LF (A) (B) (C) (D) (E) (F) (G) (H) A. Pins Per Row - See Pin Options below B. Row Specification - D= Double Row C. Pin Option - 02= .356[9.04] D. Plating Options - See Plating Options below E. Packing Information - TR= Tape and Reel F. Pad - K= Kapton - If left blank, packaging at MLE’s discretion Pad may be metal, mylar or plastic G. Alignment Option - Leave blank if not needed - AP= Alignment Pin - LC Lock Pin option H. Lead Free D .356 [9.04] C .335 [8.51] .035 [0.90] .050 [1.25] .065 [1.65] .067 [1.69] T GT F FT .039[1.00]X No. of Positions + .177[4.50] .039[1.00]X No. of Positions + .092[2.35] .039[1.00]X No. of Positions Plating Options Matte Tin all Over 10µ Gold on Contact Area/ Matte Tin on Tail Gold Flash over Entire Pin Gold Flash on Contact Area/ Matte Tin on Tail D C Pins Per Row Options Alignment Option AP 8 or 20 LC 10 or 20 None 20 Specifications: Current Rating: 2.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 500V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C B .058 .232 .275 [0.50] [5.92] [6.99] B Materials: Contact Material: Beryllium Alloy Insulator Material: High Temperature Thermoplastic, UL94V-0 LCP Tails may be clipped to acheive specific dimensions Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. UNLESS OTHERWISE SPECIFIED: .039[1.00] .015[0.38]x .009[0.23] A PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 8 7 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 01/12/15 CHECKED GWE 01/12/15 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: PCI-7 Series SIZE DWG. NO. REV C A SCALE 8:1 SHEET 1 OF 1 1