PTSHSM-503-D-02-T-LF

8 7 6 4 5 2 3 1 Recommended P.C. Board Layout SCALE 6:1 APPLICATION 0.0255[0.65] .055[1.40] F Pin 1 .040[1.02] F 0.2965[7.53] .119[3.02] .062[1.57] .050[1.27] E E .050[1.27]X No. of Positions +.125[3.16] PTSHSM-5 XX - D - XX - XX - XX - X - XX - X - LF (A) (B) (C ) (D) (E) (F) (G) (H) (I) .050[1.27]X No. of Positions +.025[0.64] .050[1.27] A. Pins Per Row - 5 through 40 B. Row Specification - D= Dual Row C. Pin Options - See Pin Options below D. Plating Options Mates with: - See Plating Options below PSSHS E. Alignment Pin PSSHSM - Leave blank if not needed - AP= With F. Locking Clip - Leave blank if not needed - C= With G. Packing Information - TR= Tape and Reel - TB= Tube H. Pad - P= Plastic - O= No Pad - If left blank, packaging at MLE's discretion Pad may be metal, mylar or plastic I. Lead Free 01 D .222 [5.65] .072 .133 [1.84] [3.37] .083[2.10] Locking Clip Option (-C) C G T GT H F FT .120[3.05] BODY HEIGHT .055[1.40] .015[0.37] .245[6.22] .056[1.42] Alignment Pin Option (-AP) B Plating options -10µ Gold on Contact Area/ Flash on Tail -Matte Tin all Over -10µ Gold on Contact Area/ Matte Tin on Tail -30µ Gold on Contact Area/ Matte Tin on Tail -Gold Flash over Entire Pin - Gold Flash on Contact Area/ Matte Tin on Tail D Pin Options Body Height .224 5.70mm .287 7.30mm .354 9.00mm .433 11.00mm C 02 06 10 14 Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 300V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C Max. Process Temperature Peak: 260°C up to 10 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Reflow: 260°C up to 10 secs. Manual Solder: 350°C up to 5 secs. B Materials: Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Plating: Au or Sn over 50µ” (1.27) Ni Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. .047[1.20] .047[1.20] A UNLESS OTHERWISE SPECIFIED: .031[0.80] .050[1.27] x No. of Positions + .074[1.88] .007[0.20] PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 8 7 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 05/05/16 CHECKED GWE 05/05/16 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: PTSHSM-5 SERIES SIZE DWG. NO. REV E C SCALE 8:1 SHEET 1 OF 1 1