PTSHSM-505-D-366-TS-T-LF

8 7 6 4 5 2 3 1 Recommended P.C. Board Layout SCALE 6:1 0.0255[0.65] .055[1.40] F .040[1.02] F APPLICATION 0.2965[7.53] .119[3.02] .062[1.57] .050[1.27] E E Pin 1 PTSHSM-5 XX - D - XXX - TS - XX - XX - XX - LF (A) (B) (C) (D) (E) (F) (G) (H) A. Pins Per Row - 5 through 40 B. Row Specification - D= Double Row C. Pin Options Mates with: - See Pin Options below PSSHS D. TS= Taller Shroud PSSHSM E. Plating Options - See Plating Options below F. Alignment Pin or Locking Clip Option - Leave blank if not needed - AP= With - C= Locking Clip G. Packing Information - TR= Tape and Reel - TB= Tube - If left blank, packaging at MLE's discretion Pad may be metal, mylar or plastic H. Lead Free D Locking Clip Option .050[1.27]X No. of Positions + .125[3.16] .050[1.27]X No. of Positions + .025[0.64] 02 80 .222 .154 .072 [5.65] [3.92] [1.84] .050[1.27] 01 Body Height 79 .133 [3.37] C .083 [2.10] .079 [2.00] .057 [1.45] .016[.040] Sq. .248 [6.30] .056 [1.42] Alignment Pin Option Plating Options 10µ Gold on Contact Area/ Flash on Tail Matte Tin all Over 10µ Gold on Contact Area/ Matte Tin on Tail 30µ Gold on Contact Area/ Matte Tin on Tail Gold Flash over Entire Pin Gold Flash on Contact Area/ Matte Tin on Tail G T GT H F FT Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 300V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C Max. Process Temperature Peak: 260°C up to 10 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Reflow: 260°C up to 10 secs. Manual Solder: 350°C up to 5 secs. B Materials: Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Plating: Au or Sn over 50µ” (1.27) Ni D Pin Options Body Height Option .283[7.20] 366 .197[5.00] 382 .264[6.70] 390 .456[11.60] 413 .440[11.20] 417 .398[10.11] 421 .212[5.40] 433 .323[8.20] 445 .220[5.60] 453 .248[6.30] 465 .295[7.50] 492 .275[7.00] 543 .401[10.20] 567 .586[14.90] 571 .252[6.40] 610 .244[6.20] 626 .524[13.30] 693 .374[9.50] 705 .535[13.60] 744 .575[14.60] 756 C B Tails may be clipped to acheive specific dimensions Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. UNLESS OTHERWISE SPECIFIED: .047 [1.20] A .047 [1.20] .031 [.080] PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. .050[1.27]X No. of Positions - .050[1.27] .006[0.15] 8 7 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 02/09/15 CHECKED GWE 02/09/15 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: PTSHSM-5-TS SERIES SIZE DWG. NO. REV C C SCALE 8:1 SHEET 1 OF 1 1