SHTSHC-203-D-03-090-G-LF

8 7 6 4 5 2 3 1 F F Recommended P.C. Board Layout SCALE 6:1 .079[2.00] .035[0.90] .079[2.00] E E .217 [5.50] D .079[2.00]X No. of Positions - .079[2.00] + .374[9.50] .079[2.00]X No. of Positions + .280[2.00] .010[0.20] .079[2.00]X No. of Positions - .079[2.00] + .244[6.20] .079[2.00]X No. of Positions - .079[2.00] + .165[4.19] .150 [3.80] .077 [1.95] SHTSHC-2 XX - D - XX - XXX - XX - XX - XXX - LF (A) (B) (C ) (D) (E) (F) (G) (H) A. Pins Per Row - 3 through 25 B. Row Specification - D= Double Row C. Pin Options - See Pin Options below D. Desired Tail Length - Please Specify - e.g. .100[2.54] =100 E. Plating Options - See Plating Options below F. Side Latch Option - SL= With - Leave blank if not needed G. Polarized Position - Leave blank if not needed - If required, specify empty pin position - 001-050 H. Lead Free 25 02 .079 [2.00] .406 [10.30] 01 24 .079[2.00] .157 [4.00] C Side Latch G T GT H F FT .020 [0.50] Sq. 02 25 01 24 .220 [5.60] .067[1.70] Materials: Contact Material: Copper Alloy Insulator Material: Polyester UL 94V-0 Nylon 6T UNLESS OTHERWISE SPECIFIED: PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 7 6 Pin Options Max. Tail Length Pin Length .103[2.62mm] .323[8.20mm] .118[3.00mm] .338[8.59mm] .177[4.50mm] .397[10.08mm] .236[5.99mm] .456[11.58mm] .315[8.00mm] .535[13.59mm] .335[8.51mm] .555[14.10mm] .355[9.02mm] .575[14.61mm] .374[9.50mm] .594[15.09mm] .394[10.01mm] .614[15.60mm] .453[11.51mm] .673[17.09mm] .493[12.52mm] .713[18.11mm] .513[13.03mm] .733[18.62mm]. .532[13.51mm] .752[19.10mm] .610[15.49mm] .830[21.08mm] .651[16.54mm] .871[22.12mm] 03 04 06 07 08 09 10 12 14 15 16 17 18 22 24 B Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. Custom Tail Length (See Pin Options) 8 C Plating options -10µ Gold on Contact Area/ Flash on Tail -Matte Tin all Over -10µ Gold on Contact Area/ Matte Tin on Tail -30µ Gold on Contact Area/ Matte Tin on Tail -Gold Flash over Entire Pin - Gold Flash on Contact Area/ Matte Tin on Tail .059[1.50] A Mates With: IDS-2 Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 500V AC/DC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C .079[2.00]X No. of Positions +.280[2.00] .010[0.20] B D 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 03/13/14 CHECKED GWE 03/13/14 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: SHTSHC-2 SERIES SIZE DWG. NO. REV C C SCALE 8:1 SHEET 1 OF 1 1