SHTSHR-205-D-02-A-G-LF

8 7 6 4 5 2 3 1 F F Recommended P.C. Board Layout SCALE 6:1 .079[2.0] .079[2.0] .035[0.90] E E D .217 [5.50] .150 [3.80] .079[2.00]X No. of Positions -.079[2.00] + .374[9.50] .079[2.00]X No. of Positions +2.80[7.10] .010[0.25] .077 [1.95] .079[2.00]X No. of Positions -.079 + .165[4.19] .079[2.00]X No. of Positions -.079[2.00] + .244[6.20] SHTSHR-2 XX - D - XX - A - XX - XX - XXX - LF (A) (B) (C ) (D) (E) (F) (G) (H) A. Pins Per Row - 5 through 25 B. Row Specification - D= Double Row C. Pin Options - See Pin Options below D. Post Option E. Plating Options - See Plating Options below F. Side Latch Option - SL= With - Leave blank if not needed G. Polarized Position - Leave blank if not needed - If required, specify empty pin position - 001-050 H. Lead Free .055 [1.40] 02 .406 [10.30] .079 [2.00] .287 [7.30] .558 [14.20] 25 01 .059 [1.50] C 24 .079 [2.00] .157 [4.00] .020 [0.50] Sq. .060[1.52] Side Latch .079 [2.00] G T GT H F FT Mates With: IDS-2 C Pin Options Tail Length .100[2.54mm] 02 .118[3.00mm] 04 Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 500V AC/DC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C B .079[2.00]X No. of Contacts - .079[2.00] .008[0.20] B Materials: Contact Material: Copper Alloy Insulator Material: Polyester UL 94V-0 Nylon 6T .220 [5.60] 02 .067 [1.70] 25 Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. .173 [4.40] 01 24 A UNLESS OTHERWISE SPECIFIED: .028[0.70] Tail (See Pin Options) PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 8 Plating options -10µ Gold on Contact Area/ Flash on Tail -Matte Tin all Over -10µ Gold on Contact Area/ Matte Tin on Tail -30µ Gold on Contact Area/ Matte Tin on Tail -Gold Flash over Entire Pin - Gold Flash on Contact Area/ Matte Tin on Tail D 7 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 03/13/14 CHECKED GWE 03/13/14 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: SHTSHR-2 SERIES SIZE DWG. NO. REV C D SCALE 8:1 SHEET 1 OF 1 1