SHTSL-105-D-02-GT-LL-LF

8 7 6 4 5 2 3 1 Recommended P.C. Board Layout SCALE 4:1 F F 'A' .100[2.54] 'B' .100[2.54] .040[1.02] .338 [8.60] .100[2.54] SHTSL-1 XX - D - 02 - XX - XX - XXX - LF (A) (B) (C ) (D) (E) (F) (G) E A. Pins Per Row - See Chart Below B. Row Specification - D= Double Row C. Style - 02= Black D. Plating Options - See Plating Options below E. Ejector Latch - LL= Long - SL= Short F. Polarized Position - Leave blank if not needed - 001- 064 G. Lead Free 'E' D .181[4.60] T G GT H F FT 'Y' 'X' .520[13.20] Steel Ear Pivot Pin .025[0.64] Sq. Mates With: IDS-1 D Plating options Matte Tin all Over 10µ Gold on Contact Area/ Flash on Tail 10µ Gold on Contact Area/ Matte Tin on Tail 30µ Gold on Contact Area/ Matte Tin on Tail Gold Flash over Entire Pin Gold Flash on Contact Area/ Matte Tin on Tail Specifications: Current Rating: 2.0 Ampere Insulation Resistance: 3000M Ohms Min. Dielectric Withstanding: 500V AC for one minute Contact Resistance: 30M Ohms Max. Operation Temperature: -40°C to +105°C .130[3.30] C E .100[2.54] C Materials: Contact Material: Phosphor Bronze or Brass Insulator Material: PBT, glass reinforced, rated UL 94V-0 'D' Pins Per Row A 5 1.269[32.24mm] 6 1.369[34.78mm] 7 1.469[37.32mm] 8 1.569[39.86mm] 10 1.769[44.94mm] 12 1.969[50.02mm] 13 2.069[52.56mm] 15 2.269[57.64mm] 17 2.469[62.72mm] 20 2.769[70.34mm] 22 2.969[75.42mm] 25 3.269[83.04mm] 30 3.769[95.74mm] 32 3.969[100.82mm] B B 0.400[10.16mm] 0.500[12.70mm] 0.600[15.24mm] 0.700[17.78mm] 0.900[22.86mm] 1.100[27.94mm] 1.200[30.48mm] 1.400[35.56mm] 1.600[40.64mm] 1.900[48.26mm] 2.100[53.34mm] 2.400[60.96mm] 2.900[73.66mm] 3.100[78.74mm] C 1.083[27.52mm] 1.183[30.06mm] 1.283[32.60mm] 1.383[35.14mm] 1.583[40.22mm] 1.783[45.30mm] 1.883[47.84mm] 2.083[52.92mm] 2.283[58.00mm] 2.583[65.62mm] 2.783[70.70mm] 3.083[78.32mm] 3.583[91.02mm] 3.783[96.10mm] D 0.849[21.57mm] 0.949[24.11mm] 1.049[26.65mm] 1.149[29.19mm] 1.349[34.27mm] 1.549[39.35mm] 1.649[41.89mm] 1.849[46.97mm] 2.049[52.05mm] 2.349[59.67mm] 2.549[64.75mm] 2.849[72.37mm] 3.349[85.07mm] 3.549[90.15mm] E ACCESSORIES X Y 0.718[18.25mm] LONG LATCH 1.035[26.3mm] 0.575[14.6mm] 0.803[20.39mm] SHORT LATCH .972[24.7mm] 0.417[10.6mm] 0.918[23.33mm] 1.018[25.87mm] 1.218[30.95mm] 1.418[36.03mm] 1.518[38.57mm] 1.718[43.65mm] 1.918[48.73mm] 2.218[56.35mm] 2.418[61.43mm] 2.718[69.05mm] 3.218[81.75mm] 3.418[86.83mm] B 'C' Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. UNLESS OTHERWISE SPECIFIED: A PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 8 7 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 09/08/16 CHECKED GWE 09/08/16 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: SHTSL-1 SERIES SIZE DWG. NO. REV C C SCALE 3:1 SHEET 1 OF 1 1