SHTSLSM-203-D-02-G-V-LL-LF

8 7 6 4 5 Recommended P.C. Board Layout SCALE 6:1 2.01 .079 F 2 3 Positions 3 4 5 6 7 8 10 11 12 13 15 17 20 22 25 34 3.51 .138 9.19 .362 E 0.89 .035 A 1.004 1.083 1.161 1.240 1.319 1.398 1.476 1.634 1.713 1.791 1.949 2.106 2.343 2.500 2.736 3.445 Inches 1 B 25.5 27.5 29.5 31.5 33.5 35.5 37.5 41.5 43.5 45.5 49.5 53.5 59.5 63.5 69.5 87.5 mm 0.157 0.236 0.315 0.394 0.472 0.551 0.709 0.787 0.866 0.945 1.102 1.260 1.496 1.654 1.890 2.598 Inches C 4.0 6.0 8.0 10.0 12.0 14.0 18.0 20.0 22.0 24.0 28.0 32.0 38.0 42.0 48.0 66.0 mm 0.465 0.543 0.622 0.701 0.780 0.858 1.016 1.094 1.173 1.252 1.409 1.567 1.803 1.961 2.197 2.906 Inches D 11.8 13.8 15.8 17.8 19.8 21.8 25.8 27.8 29.8 31.8 35.8 39.8 45.8 49.8 55.8 73.8 mm 0.654 0.732 0.811 0.890 0.969 1.047 1.205 1.283 1.362 1.441 1.598 1.756 1.992 2.150 2.386 3.094 Inches 16.6 18.6 20.6 22.6 24.6 26.6 30.6 32.6 34.6 36.6 40.6 44.6 50.6 54.6 60.6 78.6 mm F E Mates with IDS-2 A SHTSLSM-2 XX - D - 02 - XX - V - XX - XXX - XX - X - LF A B C D E F G H I J B A. Pins Per Row 03, 04, 05, 06, 07, 08, 10, 11, 12, 13, 15, 17, 20, 22, 25, 34 Plating Options B. Row Specification G 10µ Gold on Contact Area / Flash on Tails - D = Double Row T Matte Tin Over Entire Pin C. Pin Option GT 10µ Gold on Contact Area /Tin on Tails - 02 = Surface Mount H 30µ Gold on Contact Area / Tin on Tails D. Plating Option F Gold Flash Over Entire Pin - See Plating Options Box FT 3µ Gold on Contact Area / Flash on Tails E. Mount Type - Vertical SMT Latch Options X Y F. Ejector Latch LL = Long Latch 0.803 [20.4] 0.448 [11.4] - LL = Long Latch SL = Short Latch 0.685 [17.4] 0.342 [8.7] - SL = Short Latch o See box for details G. Polarized Position - Leave Blank if not needed - If required, specify empty pin position Specifications: - 001-068 Current Rating: 1.0 Ampere H. Packaging Insulation Resistance: 3000M Ohms Min. Dielectric Withstanding: 500V AC TB = Tube Contact Resistance: 30M Ohms Max. TR = Tape and Reel Operation Temperature: -40°C to +105°C I. Pick and Place Cap Max. Process Temperature Peak: 260°C up to 10 secs. 0 = No pick and place Cap Process: 230°C up to 60 secs. o Only available for Tube Pack Wave: 260°C up to 6 secs. P = Plastic Pick and Place Cap Reflow: 260°C up to 10 secs. Manual Solder: 350°C up to 5 secs. J. Lead Free 2.01 .079 D 5.99 .236 01 2.01 .079 C C 3.99 .157 Y X B STEEL SWIN-LOCK [0.5 x 0.5] .020 x .020 8.13 .320 UNLESS OTHERWISE SPECIFIED: A PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 7 6 5 C B Materials: Contact Material: Brass Insulator Material: LCP, glass reinforced Rated UL94V-0 D 8 D 4 3 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 NAME DATE DRAWN GWE 12/12/16 CHECKED DRC 12/12/16 A ENG APPR. MFG APPR. ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: SHTSLSM-2 SERIES SIZE DWG. NO. REV C A SCALE: 6:1 SHEET 1 OF 1 1