SHTSR-605-D-02-G-LF

8 7 6 4 5 2 3 1 F F 'A' 'B' 'C' .050[1.27] .018[0.46] Sq. E E Recommended P.C. Board Layout SCALE 8:1 .100 .248 .320 [2.54] [6.30] [8.10] .100[2.54] .050[1.27] D .0295[0.75] .002 D .160[4.10] Pin 1 SHTSR-6 XX - D - 02 - XX - XXX - LF (A) (B) (C ) (D) (E) (F) A. Pins Per Row - 5 through 50 B. Row Specification - D= Double Row C. Style - 02= Tail Length .126[3.2] D. Plating Options - See Plating Options below E. Polarized Position - Leave blank if not needed - 010-100 F. Lead Free C .210[5.30] .280[7.10] .118[3.00] G T GT H F FT .457[11.60] B .100[2.54] Mates With: IDS-6 C Pins Per Row 05 07 08 10 13 15 17 20 25 30 34 35 40 45 50 Plating options 10µ Gold on Contact Area/ Flash on Tail Matte Tin all Over 10µ Gold on Contact Area/ Matte Tin on Tail 30µ Gold on Contact Area/ Matte Tin on Tail Gold Flash over Entire Pin Gold Flash on Contact Area/ Matte Tin on Tail Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 250V AC for one minute Contact Resistance: 30M Ohms Max. Operation Temperature: -40°C to +105°C Materials: Contact Material: Phosphor Bronze Insulator Material: PBT, glass reinforced, rated UL 94V-0 A 0.549[13.95] 0.649[16.49] 0.699[17.76] 0.799[20.30] 0.949[24.11] 1.049[26.65] 1.149[29.19] 1.299[33.00] 1.549[39.35] 1.799[45.70] 1.999[50.78] 2.049[52.05] 2.299[58.40] 2.549[64.75] 2.799[71.10] B 0.462[11.75] 0.563[14.29] 0.605[15.36] 0.713[18.10] 0.863[21.91] 0.963[24.45] 1.063[26.99] 1.213[30.80] 1.463[37.15] 1.713[43.50] 1.913[48.58] 1.963[49.85] 2.213[56.20] 2.463[62.55] 2.713[68.90] C 0.200[5.08] 0.300[7.62] 0.350[8.89] 0.500[11.43] 0.600[15.24] 0.700[17.78] 0.800[20.32] 0.950[24.13] 1.200[30.48] 1.450[36.83] 1.650[41.91] 1.700[43.18] 1.950[49.53] 2.200[55.88] 2.450[62.23] B Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. UNLESS OTHERWISE SPECIFIED: A PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 8 7 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 03/19/14 CHECKED GWE 03/19/14 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: SHTSR-6 SERIES SIZE DWG. NO. REV C A SCALE 8:1 SHEET 1 OF 1 1