TSHS-602-S-04-A-G-LF

8 7 6 4 5 2 3 Recommended P.C. Board Layout SCALE 8:1 F 1 SINGLE ROW F Pin 1 Pin 1 .100 [2.54] .050[1.27] DOUBLE ROW .026[0.66] .050[1.27] .026[0.66] SINGLE ROW DOUBLE ROW E E APPLICATION TSHS-6 XX - X - XX - A - XX - XXX - LF (A) (B) (C ) (D) (E) (F) (G) D A. Pins Per Row - 1 through 40 B. Row Specification - S= Single Row - D= Double Row C. Pin Options - See Pin Options below D. A= Tail Length: .110 [2.80] E. Plating Options - See Plating Options below F. Polarized Position - Leave blank if not needed - If required, specify empty pin position - e.g. 012 for Pin 12 G. Lead Free POST .050[1.27]X No. of Positions .013[0.33] C LENGTH .100 [2.54] .100[2.54] 40 01 .050[1.27] .110 [2.80] SINGLE ROW B .050[1.27]X No. of Spaces 02 80 01 79 UNLESS OTHERWISE SPECIFIED: PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 6 5 04 05 08 11 14 16 20 22 24 26 28 30 32 40 B Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. DOUBLE ROW 7 C Materials: Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Plating: Au or Sn over 50µ” (1.27) Ni .100 .197 [2.54] [5.00] 8 Pin Options Length Post with .120 Tail .320[8.13mm] .100[2.54mm] .330[8.38mm] .110[2.79mm] .410[10.41mm] .190[4.83mm] .425[10.80mm] .205[5.13mm] .450[11.43mm] .230[5.84mm] .505[12.83mm] .285[7.24mm] .555[14.10mm] .335[8.51mm] .610[15.49mm] .390[9.91mm] .625[15.88mm] .405[10.29mm] .650[16.51mm] .430[10.92mm] .705[17.91mm] .485[12.32mm] .755[19.18mm] .535[13.59mm] .825[20.96mm] .605[15.37mm] 1.050[26.67mm] .830[21.08mm] Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 300V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C Max. Process Temperature Peak: 260°C up to 10 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Manual Solder: 350°C up to 5 secs. .018[0.46] Sq. A Mates with: LSSHS SMSS SSHS Plating options -10µ Gold on Contact Area/ Flash on Tail -Matte Tin all Over -10µ Gold on Contact Area/ Matte Tin on Tail -30µ Gold on Contact Area/ Matte Tin on Tail -Gold Flash over Entire Pin - Gold Flash on Contact Area/ Matte Tin on Tail G T GT H F FT D 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 02/15/16 CHECKED GWE 02/15/16 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: TSHS-6 SERIES SIZE DWG. NO. REV B C SCALE 8:1 SHEET 1 OF 1 1