TTSHCR-502-S-040-02-040-T-LF

8 7 6 4 5 2 3 1 Recomended P.C. Board Layout SCALE 10:1 F F Pin 1 Pin 1 .050 [1.27] .026[0.66] .050[1.27] .026[0.66] .050[1.27] Double Row Single Row E E APPLICATION TTSHCR-5 XX - X - XXX - XX - XXX - XX - XXX - LF (A) (B) (C) (D) (E) (F) (G) (H) A. Pins Per Row - 1 through 40 B. Row Specification - S= Single Row - D= Double Row C. Desired Tail - .040[1.02] - .300[7.62] D. Pin Options - See Pin Option box below E. Desired Post Height - .040[1.02] - .400[10.20] F. Plating Options - See Plating Options below G. Polarized Position - Leave blank if not required - e.g. .200[5.08] =200 H. Lead Free D .050[1.27]X No. of Positions .015[0.38] POST .098 [2.50] 40 .079 [2.00] C 01 TAIL .128 [3.25] .050[1.27] G T GT H F FT .016[0.40] Sq. Single Row 02 80 .050 .134 [1.27] [3.40] .050 [1.27] 01 Mates with: LSSHS SMSS SSHS Plating Options Gold on Contact Area/ Flash on Tail Matte Tin all Over 10µ Gold on Contact Area/ Matte Tin on Tail 30µ Gold on Contact Area/ Matte Tin on Tail Gold Flash over Entire Pin Gold Flash on Contact Area/ Matte Tin on Tail Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 300V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C Max. Process Temperature Peak: 260°C up to 10 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Manual Solder: 350°C up to 5 secs. .050[1.27]X No. of Spaces B D Pin Options Overall Length Max. Post .430[10.92] .125[3.17] 08 .480[12.19] .175[4.44] 10 .530[13.46] .225[5.71] 12 .580[14.73] .275[6.98] 14 Post + Tail + .110[2.80] must not exceed Overall Length C B Materials: Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Plating: Au or Sn over 50µ” [1.27] Ni 79 Tails may be clipped to acheive specific dimensions Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. UNLESS OTHERWISE SPECIFIED: A Double Row PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 8 7 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 NAME DATE DRAWN EOW 12/05/14 CHECKED GWE 12/05/14 A ENG APPR. MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL Q.A. TITLE: TTSHCR-5 SERIES ADDRESS: FINISH NEXT ASSY USED ON APPLICATION 3 SIZE DWG. NO. REV C A SCALE 12:1 DO NOT SCALE DRAWING 2 SHEET 1 OF 1 1